[QUOTE=Identity;23197014]Thinking about getting a Madbull Noveske Amplifier. Anyone hear any thing good or bad about them?
And I might order a Madbull Gemtech G5 Silencer, along with some PMAG's.[/QUOTE]
I have one(Stupid friend is holding onto it. Need to go rob his house to get it back.). It also you can adjust the pitch of the sound it makes just by moving the two cones around inside the amplifier. It's a good accessory for you soft'n needs, and it doesn't look half bad on any weapon you throw on it.
[QUOTE=metal man;23245210]I have one(Stupid friend is holding onto it. Need to go rob his house to get it back.). It also you can adjust the pitch of the sound it makes just by moving the two cones around inside the amplifier. It's a good accessory for you soft'n needs, and it doesn't look half bad on any weapon you throw on it.[/QUOTE]
So it's worth the buy? Awesome. I'm trying to order one in tan. I'll see how that goes.
But yeah, if it makes it sound better I'll buy one. I found one for $34 I believe.
Though I just found one for $13.
[url]http://www.ebairsoft.com/element-ex156-mini-version-sound-pri-2853.html?reviews_id=5299[/url]
[QUOTE=zombiefreak;23244419] will airsofters give me shit if I wear Flecktarn but use an American gun?[/QUOTE]
Probably not. I've used Flecktarn with german web gear but my gun was a SCAR-L in tan. Didn't match at all, but no one harassed me about it. I've used a M4 and AK just as well with no problems.
[QUOTE=xXEnder007Xx;23246012]Probably not. I've used Flecktarn with german web gear but my gun was a SCAR-L in tan. Didn't match at all, but no one harassed me about it. I've used a M4 and AK just as well with no problems.[/QUOTE]
It's just...improper :frown: Yeah nobody is going to give you shit about it, and I personally don't care when other people do it, but I guess it's just how I think about myself. An Aug would be fine though, as I assume that's what you mean by an Austrian gun.
[QUOTE=zombiefreak;23244419]and will airsofters give me shit if I wear Flecktarn but use an American gun?[/QUOTE]
No one will give a damn unless you are playing with elitist douchebags.
Are all inner barrels the same length or something?
[url]http://www.airsoftgi.com/product_info.php?products_id=1231[/url]
For example, I'm going to get a new barrel for my M15 Carbine, which has the same barrel length as an M4. This is a M16 barrel which have full length barrels. But from what Ender has told me it's what I need, I'm just being OCD at this point.
The OP has info on barrel lengths, measure your current barrel in milimeters then check the link.
Quick question. Could the quality and type of BB you are using inside a mid-cap cause it to not feed correctly?
For example, using an unpolished BB or one without slick?
Found the same barrel M4 length. I was right, it would've been too long.
I'm looking for an affordable sniper gun. This is all I could find:
[url]http://www.airsoftpost.com/product_info.php?products_id=32295{3}19[/url]
I'm going to buy the scope with it too for a total of $120.
Jg bar 10
What is that one airsoft site with the obscure camo patterns like the blue Chinese stuff and the + shaped stuff..
[editline]04:45PM[/editline]
Never mind, I found it.
IMO stock snipers are not worth it at all, they'll have the same range as any AEG(Well rifles), even less then upgraded AEG's. Get a good sniper to work on, TM VSR, Jg bar10 could work too.
Yeah got one, kinds stupid..
Going to the iSeries next year, and is it possible to join a Airsoft battle without gear/weapons? can you rent them?
(Sorry if im a noob but i thougt it would be a great activity to do)
If you do it correctly you can make a JG Bar10 hit around 450-475 FPS if you perfect the Airseal, I've heard of 500FPS Even with perfect 100% Airseal. All you would really need then is a new bucking and barrel and it's a good to go rifle.
People complain about the sears for the bar10 but mines are still running good after 1k shots
Affordable? Sniper rifle? They don't exist if you want to outrange stock AEG's.
[QUOTE=Stupideye;23267528]Affordable? Sniper rifle? They don't exist if you want to outrange stock AEG's.[/QUOTE]
This.
A good sniper to outrange an AEG will run over 700-1000$(You need to upgrade) most of the time.
Also to the guy only talking about the fps on a bar 10, fps isn't the only thing that count you know? A 330 fps could easily outrange a 500 fps rifle.
How would it cost $700, much less $1000? Redo the seal, buy spacers, a bucking, maybe nub [I](don't know how spring snipers work)[/I], and inner barrel. The inner barrel will probably be the most expensive part, as an EDGI barrel is about $100.
$120 for gun. $100 for barrel. $20 for bucking. $7 for nub. DIY job for airseal, maybe + a few inexpensive parts.
What am I missing here.
[QUOTE=Mbbird;23268641]How would it cost $700, much less $1000? Redo the seal, buy spacers, a bucking, maybe nub [I](don't know how spring snipers work)[/I], and inner barrel. The inner barrel will probably be the most expensive part, as an EDGI barrel is about $100.
$120 for gun. $100 for barrel. $20 for bucking. $7 for nub. DIY job for airseal, maybe + a few inexpensive parts.
What am I missing here.[/QUOTE]
Zero trigger, a new piston and cylinder set (Not really used to work around snipers), a new spring, a few other parts that goes there, a good barrel and hop up set, maybe some change around some inner parts too.
Based upon the discussion within the forum sticky, in the interest of having it in both places, with appropriate credit would you like the contents of this OP to be copied and pasted into the Sticky OP? (DarkSamus)
Again, while I don't want the thread itself stickied, having the information in two spots isn't a bad thing. Go ahead.
[QUOTE=Mbbird;23268641]
$120 for gun. $100 for barrel. $20 for bucking. $7 for nub. DIY job for airseal, maybe + a few inexpensive parts.
[/QUOTE]
Im going to have to agree with this.
i pulled my dragunov to around 450 fps with a new spring, which outranges prettymuch any AEG (Hop up is fiddly as hell but incredibly useful). All That was only around £250.
Gun + spring + scopes 'n' all
[QUOTE=Mbbird;23268641]How would it cost $700, much less $1000? Redo the seal, buy spacers, a bucking, maybe nub [I](don't know how spring snipers work)[/I], and inner barrel. The inner barrel will probably be the most expensive part, as an EDGI barrel is about $100.
$120 for gun. $100 for barrel. $20 for bucking. $7 for nub. DIY job for airseal, maybe + a few inexpensive parts.
What am I missing here.[/QUOTE]
130$ = Bar10 (Including scope)
80$ = Edgi 6.01
20$ = Nineball Bucking
OPTIONAL
70$ = TM Precision Chamber (Much better then the JG Hopup unit)
The VSR system doesn't need a nub as the hopup unit has a built in one. You can DIY file it down and glue a SCS but no point
New sear set, new piston, new spring?
No need for sears,piston or spring if your on a budget, If your budget is a bit high though you can get the ASGI PE Piston,Sears,Spring guide. Theres no need for new spring, The stock one pumps out 400FPS with some telfon tape and a nineball you can make it hit 450 no prob
Yeah but if you want a nice one:
[IMG]http://1322134.com/stuff/posters/yougottado/images/screenshot.jpg[/IMG]
Does anyone know if the Type 07 BDUs from Ehobby are any good? For $80 I expect it to be decent and not fall apart on me, but you never know with Chinese made stuff.
[url]http://shop.ehobbyasia.com/combat-gears/clothing-bdu/bdu-uniform/ea-gear-bdu-uniform-chinese-pla-2007-ver.html[/url]
Why are guns in England so damn expensive compared to America? Do we tax the shit out of them or something?
[QUOTE=AMD 32;23389554]Why are guns in England so damn expensive compared to America? Do we tax the shit out of them or something?[/QUOTE]
I think they add a $200 tax on them or somit.
They aren't that much more expensive,then again your talking about England.
Sorry, you need to Log In to post a reply to this thread.
