[QUOTE=krazipanda;26082462]Thanks for al the help :D now I've just got to wait till christmas in an attempt to save a few bucks...
[editline]15th November 2010[/editline]
Ah, SHIT! I thought it was 350fps, not 380!
What would be a good spring to remedy this?[/QUOTE]
You're really going to buy a new spring for 30 more FPS? Seriously?
[QUOTE=krazipanda;26082462]Thanks for al the help :D now I've just got to wait till christmas in an attempt to save a few bucks...
[editline]15th November 2010[/editline]
Ah, SHIT! I thought it was 350fps, not 380!
What would be a good spring to remedy this?[/QUOTE]
I left my RPK's spring compressed for 4 days or so and got it to go under 400, just barely.
starting from ~450.
Since Nifae broke the ice with videogame inspired loadouts, that are actually practical, I guess I'll seriously start sorting mine out.
To make this post valid: I'm searching for a (military?) duster/trench coat. I think it's a leather duster. Any help on this would be great.
[QUOTE=Identity;26084051]You're really going to buy a new spring for 30 more FPS? Seriously?[/QUOTE]
For 30 LESS fps.
Max at my place is 350
[editline]15th November 2010[/editline]
[QUOTE=Identity;26084051]You're really going to buy a new spring for 30 more FPS? Seriously?[/QUOTE]
For 30 LESS fps.
Max at my place is 350
[editline]15th November 2010[/editline]
Dem double posts
M100 or M110 will do the trick I think. Some companies do it differently though, look around until you find one. Brand doesn't matter a whole lot, a spring is a spring. Or you could do what Samus did, but be careful about how long you leave it for.
Does replacing a spring require acute knowlege of how to deconstruct a airsoft gun?
And if I'm NOT looking to decrease my power, how can I release tension?
By pulling the trigger a couple times on semi-auto. And not really, you open the gearbox and it's right there.
Thanks.
So there's NOTHING wrong with my loadout?
[QUOTE=krazipanda;26098575]So there's NOTHING wrong with my loadout?[/QUOTE]
Post the kit list again
could someone find me a good PCU (preferably not a copy) that will actually have an XL size that is fucking XL and not some chinese XL which is M in england
also preferably with shipping to england
thx
[QUOTE=krazipanda;26071729]So, my loadout so far is:
Mask:
[url]http://www.ebairsoft.com/strike-metal-mesh-half-face-mask-p-3666.html[/url]
Lipo battery
[url]http://www.airsoftgi.com/product_info.php?products_id=4742[/url]
G36c
[url]http://www.airsoftgi.com/product_info.php?products_id=6937[/url]
Vest
[url]http://www.airsoftgi.com/product_info.php?cPath=28_96&products_id=1286[/url]
Goggles
[url]http://www.airsoftgi.com/product_info.php?products_id=3261[/url]
Flashbang and co2 converter
[url]http://www.airsoftgi.com/product_info.php?products_id=5034[/url]
[url]http://www.airsoftgi.com/product_info.php?products_id=1062[/url]
P
I've forgotten the name of the lipo smart charger, so it's not on there.
Any major gripes about what's on here?[/QUOTE]
You could get 70 good, loud flashbangs for one of those "reusable" ones that doesn't make too much sound and you are guaranteed to lose before 70 uses.
That's the math right? ThunderBs, $1 per use?
The reusable one is really good... How many db do the thunders make?
Too many.
[editline]16th November 2010[/editline]
130 db. I highly doubt the GSG-1 makes 120.
[editline]16th November 2010[/editline]
Nevermind on my comment (120 still seems like a massive overstatement), your call. I saw a video review on it a while ago and it didn't seem too loud. Re-reading reviews now that mostly say it's loud enough indoors to create the flinching reaction, and you say you're going to play CQB a lot. Thunder Bs are actually [I]too[/I] loud to use comfortably in closed rooms IMO.
omg wat do i get ca scar-l or kwa m4 or kwa sr10 HELP WHAT BUY
i'm retarded at making decisions
ca scar cause its sexier
[QUOTE=Stupideye;26107519]ca scar cause its sexier[/QUOTE]
i know, i'm bored of M4 variants. everyone and their granny has one. but everyone's like ~KWA BEST INTERNALS PRO~
Get CA SCAR and put 2GX gearbox in it. Then you have your SCAR and KWA internals.
kwa does have great internals, but M4's are boring bro.
[QUOTE=Taepodong-2;26108264]Get CA SCAR and put 2GX gearbox in it. Then you have your SCAR and KWA internals.[/QUOTE]
Do they even sell separate complete 2GX's?
CA SCAR's gearbox has some parts on it that are different than your standard Ver.2 gearbox. Uses this little external gear to control the selector switch instead of the normal ver.2 selector plate. This allows for ambidextrous control of the selector. I doubt a KWA gearbox is going to be a simple drop in operation for the CA SCAR.
[QUOTE=Taggart;26106171]could someone find me a good PCU (preferably not a copy) that will actually have an XL size that is fucking XL and not some chinese XL which is M in england
also preferably with shipping to england
thx[/QUOTE]
hngggggggggggg
[QUOTE=Taggart;26106171]could someone find me a good PCU (preferably not a copy) that will actually have an XL size that is fucking XL and not some chinese XL which is M in england
also preferably with shipping to england
thx[/QUOTE]
I sure hope you have $600 to spend.
[QUOTE=Taggart;26109274]hngggggggggggg[/QUOTE]
"...not a copy..."
Suddenly, expensive as fuck.
[editline]17th November 2010[/editline]
Hell, you'd probably be better off with a TAD/5.11/Whatever hardshell in that case. Probably end up being cheaper.
doesn't have to be a PCU if it looks it, fyi
[editline]17th November 2010[/editline]
hardshells would be fine too but need recommendations
[QUOTE=Taggart;26109741]doesn't have to be a PCU if it looks it, fyi
[editline]17th November 2010[/editline]
hardshells would be fine too but need recommendations[/QUOTE]
Are you looking for RL wear or airsoft stuff?
[editline]17th November 2010[/editline]
Price range?
both
not too pricy but I'll spend some dolla on it if it's worth it
[QUOTE=Taggart;26110023]both
not too pricy but I'll spend some dolla on it if it's worth it[/QUOTE]
Patagonia is bombproof. I wear my hardshell skiing, airsofting, and pretty much everywhere. Any of thier seam-welded stuff is absolutely awesome quality. Little pricy, but will last for-fucking-ever. Worlds better than North face stuff Ive owned in the past.
TAD is also good. Pricy and high-quality, but also high-speed-low-drag-operator. Some of their stuff isn't quite as nice as Patagonia, but again, its tacticool.
Condor is cheap and good for the price. Obviously not the same as the above two, and wont last nearly as long, but still will do the job for a while and will do it cheap.
[editline]17th November 2010[/editline]
I really do love my Patagonia jacket. Its warm as anything, completely waterproof, and in black, actually looks quite operator. Also is designed for mountianclimbing, and has climbing pockets that can be accessed while wearing tac-gear.
Sorry, you need to Log In to post a reply to this thread.
