• The Official Questions Thread V. POST YOUR FUCKING QUESTIONS HERE DONT MAKE A FUCKING THREAD DUMBASS
    997 replies, posted
Anyone have any tips on how to make a high-cap feed better? My famas is great and I've put a lot of time and money into it only for it to barely work because the magazine feeds only half the time.
[QUOTE=ZestyLemons;39965096]What are some good brand bb's? 0.20g preferably[/QUOTE] .25g are infinitely better, I promise. Either way, Elite Force and Goldenballs are all I know off the top of my head.
Just found out that I spent $26 more going through evike rather than airsoft gi when I bought my gun, which would have been enough for me to get more upgrades or buy a better rifle
[QUOTE=paindoc;39965739]Just found out that I spent $26 more going through evike rather than airsoft gi when I bought my gun, which would have been enough for me to get more upgrades or buy a better rifle[/QUOTE] At the time when I sent you that Evike link, ASGI said it was out of stock (which is why I even posted the evike link). ASGI never says when things are expected to come back in stock.
[QUOTE=Ninja Duck;39965954]At the time when I sent you that Evike link, ASGI said it was out of stock (which is why I even posted the evike link). ASGI never says when things are expected to come back in stock.[/QUOTE] I'm not that mad. Just that I really don't have much money to spend right now and what I spent was about the max I was willing to spend. Whatever, still a good gun. I better get my "tactical" harness though
Two options: -Fucked up spring. -Fucked up slide rail.
so I've noticed something with my Hi-capa. When I pull the slide back, the hammer will catch on the blow back unit and prevent the nozzle from going all the way back with the rest of the slide. I get the feeling that this shouldnt be happening, and is probably messing with my gun. Any ideas on a fix?
Sand down the hammer maybe? If you ever need your lower back, just tell me.
Nah, it did it with the other lower too, I only just now figured out what was causing it.
Where's the cheapest place to get east german AK74 furniture? Not too bothered about the pistol grip but the stock & handguard would be helpful.
robertrtg not sure about shipping to britland although it's only furniture so you should be ok
I remember seeing that website before and the east german parts on there, but now i'm actually interested in them the stock and handguards don't seem to be listed anymore, unless i'm looking in the wrong place. edit: Found the lower handguard, it wasn't labelled as east german. What upper handguard would work/match with it? Still kind of interested in a stock too but i can deal with a wire coathanger style folding stock if they're unavailable.
the first upper the $4 brown one
Does anyone know if KWA Kriss mags will fit in MP7 mag pouches? I thought I read somewhere that they do fit and I was wondering if anyone here could elaborate.
Just wired up a mosfet and I'm having some strange issue...for some reason firing in full auto mode will randomly turn into semi-automatic mode and won't revert to firing automatic until I move my selector switch to safety. Semi-auto also switches to firing fully-automatic just as often...any idea what might be up?
[QUOTE=CottonTM;39976446]Just wired up a mosfet and I'm having some strange issue...for some reason firing in full auto mode will randomly turn into semi-automatic mode and won't revert to firing automatic until I move my selector switch to safety. Semi-auto also switches to firing fully-automatic just as often...any idea what might be up?[/QUOTE] selector plate/switch might not be properly placed or something along those lines
You're a genius and I love you holy crap that trigger response oh my god how is it possible to love my guarder infinite torque up motor even more
What type of pads are better? [thumb]http://www.ebairsoft.com/images/middle/TMC DP style knee pads set.jpg[/thumb] or [IMG]http://www.ebairsoft.com/images/middle/TMC Knee Pads set for CP pants DE.jpg[/IMG] The airflex style ones or the other ones, talking about repro and not real crye.
Any ideas on how to paint over the orange tip of my DE and USP? For my USP I don't really want to cut off the tip since I kind of like the look of the slightly extended barrel. So any ideas or guides on how to do it, what paint should I use and whatnot? Also removing the orange tip on my CM040 if anyone knows how to do it.
Just sharpie it and be done with it CM040 should have a screw under the flashhider to undo then just unthread it as per usual unless it's glued to hell, then boil it off.
But then it looks shiny and out of place on the matte black paint of the rest of the gun.
yeah but who's gonna notice or care. Eh, it's what I do for pistols.
Also the orange tip is glued on. Goddammit China.
Leave it in hot water for a while and the glue should melt enough for you to be able to get it off. I know you can do that for some orange tips, hopefully if i'm wrong someone else will correct me. Never had to deal with orange tips myself, just going off what i recall seeing posted here before/common knowledge.
So boil the orange tip on the CM040 and plier it off and I'm thinking matte black spray paint for the pistols. Any painters here that can help me? Something tells me TaiwanesePrick knows what to do.
Use a butane lighter and twirl the flashhider around the flame for a couple minutes and the glue will come off very easily, it's how I've removed all my orange tips.
Anyone recommend me an electric automatic with good range and accuracy that can be concealed in a large ALICE backpack? Such as a carbine or a submachine gun?
for the pistols use nail polish remover [editline]20th March 2013[/editline] [QUOTE=Rageblood;39977254]Anyone recommend me an electric automatic with good range and accuracy that can be concealed in a large ALICE backpack? Such as a carbine or a submachine gun?[/QUOTE] Galaxy MP5k
[QUOTE=felix the cat;39977291]for the pistols use nail polish remover [/QUOTE] But wouldn't that completely strip the paint? I know that its ABS plastic but it would still probably look ugly afterwards.
rough life [editline]20th March 2013[/editline] It's either a slight discoloration or you spend 90000 hours rubbing the orange off with 0000 steel wool and paint thinner
Sorry, you need to Log In to post a reply to this thread.