• The Official Questions Thread V. POST YOUR FUCKING QUESTIONS HERE DONT MAKE A FUCKING THREAD DUMBASS
    997 replies, posted
If you're using a metal slide you need a 150% spring [editline]20th March 2013[/editline] plastic don't use one because you'll break the front off the slide
[QUOTE=dwt110;39986503]is a new spring necesary if its the same material and brand slide just different trades[/QUOTE] don't you want a more fun pew pew
[QUOTE=TehG3A3;39986335]The first dot sight you posted only looks good on SMGs. EOTechs look really nice on G36s, I have a 551 mounted on top of my railed 3.5x sight.[/QUOTE] [img]http://img.photobucket.com/albums/v223/eltee49/G36/Eotech/SL8G36Eotech.jpg[/img] Definitely going to be taking inspiration from this.
how the hell do I get the barrel out of my Cyma AK-74? I cannot figure it out. I have almost everything else gone but I can't get the gun seperated into the two main sections nor can I get the gearbox out (almost, but not quite). I have no idea what to do. I have looked all over for screws and such but I can't get it off. Also, how do you remove the flash hider? I can't get it off no matter how hard I try, even when someone helps me
what model number is it for the compensator, check the front sight detent it might be glued in
[QUOTE=felix the cat;39986567]If you're using a metal slide you need a 150% spring [editline]20th March 2013[/editline] plastic don't use one because you'll break the front off the slide[/QUOTE] i would be switching from an ugly metal slide to a metal slide [editline]20th March 2013[/editline] its literally the same brand design and everything slide, just one has ugly as fuck white "stark arms" trades and one has glock trades
but stark arms iron man [editline]20th March 2013[/editline] stark industries whatever
[QUOTE=paindoc;39986762]how the hell do I get the barrel out of my Cyma AK-74? I cannot figure it out. I have almost everything else gone but I can't get the gun seperated into the two main sections nor can I get the gearbox out (almost, but not quite). I have no idea what to do. I have looked all over for screws and such but I can't get it off. Also, how do you remove the flash hider? I can't get it off no matter how hard I try, even when someone helps me[/QUOTE] Can you post a picture of what you have so far?
-snip- wrong thread!
[QUOTE=apoctank;39987094]Can you post a picture of what you have so far?[/QUOTE] I got it. took some experimentation and it wasn't easy but I now have a mad bull barrel in my AK and can't wait to try it tomorrow
-snip- Seems like it'll work.
You guys kidding? Open reflex sights are drop dead sexy. I have this one made by Osprey and it is a quality piece of work: [url]http://www.opticsplanet.com/osprey-holographic-sight.html[/url] The model I have allows you to change between 4 different dot sizes as well as between red and green with a huuuuge brightness range. Super dark out? Use the tiniest miniscule dot on the lowest brightness setting and you'll basically cream yourself just looking through it. SUPER BRIGHT DAY, turn the dot up to 3/4 largest size at near max brightness.
[QUOTE=CottonTM;39988324]You guys kidding? Open reflex sights are drop dead sexy. I have this one made by Osprey and it is a quality piece of work: [url]http://www.opticsplanet.com/osprey-holographic-sight.html[/url] The model I have allows you to change between 4 different dot sizes as well as between red and green with a huuuuge brightness range. Super dark out? Use the tiniest miniscule dot on the lowest brightness setting and you'll basically cream yourself just looking through it. SUPER BRIGHT DAY, turn the dot up to 3/4 largest size at near max brightness.[/QUOTE] literally the exact same sight with a different logo on it.
Anybody know where I can get a 6-colour desert PASGT vest cover that isn't an x-tra small, small, or medium?
[QUOTE=Herfjotur;39989234]literally the exact same sight with a different logo on it.[/QUOTE] if it really is the exact same then sure get it for $30 because the build quality is very good and the controls are crisp as fuark, and the dot itself has very good definition. I don't see what's bad about it, perhaps I should make a video going over mine. It's leaps and bounds better than the G&P Aimpoints I've had and doesn't ghost like many eotech clones I've seen.
That would be cool. And what type of gun do you use it on? Certain types of optics only look good on certain types of guns apparently.
On my M4, I'll post it in the gun pics thread, just took some pics. [IMG]http://i.imgur.com/yKM452b.jpg[/IMG] so I used some fine grit sandpaper to get that horrid Evike logo off, but it kinda messed up the finish of the gun. Using 1500 grit sandpaper, any ideas?
[t]http://i45.tinypic.com/6jhzdl.jpg[/t] Was trying to take out my gearbox to fix the issue with the semi being full auto. It won't come out, just budges a little. What else do I need to remove? I already removed the rear body pin and the pin in the middle of the lower gearbox.
buffer tube [editline]21st March 2013[/editline] also angle your selector between safe and semi [editline]21st March 2013[/editline] mag release lol [editline]21st March 2013[/editline] also bolt catch maybe
Thanks. The front of the gearbox moves but the back is stuck, so I think it's the buffer tube. The screw is in really deep and the screwdrivers I have aren't long enough. :(
go out and buy long screwdrivers in both flat and phillips you'll need them if you plan on rolling ars
What M16A1 is the best for the cash, and historical accuracy? I was looking at the CA M16A1 but it's $260 before coupons/codes so I was wondering if there was a cheaper option, but I don't want any shitty "VN" variant of like an A4 or A3.
[QUOTE=/Vandy/;39999853]What M16A1 is the best for the cash, and historical accuracy? I was looking at the CA M16A1 but it's $260 before coupons/codes so I was wondering if there was a cheaper option, but I don't want any shitty "VN" variant of like an A4 or A3.[/QUOTE] G&P M16a1 is best a1. I have one because I was doing a vietnam Loadout but I am gonna eventually slap some A2 handguards on there for my IDF Loadout that I'm gonna do.
[QUOTE=/Vandy/;39999853]What M16A1 is the best for the cash, and historical accuracy? I was looking at the CA M16A1 but it's $260 before coupons/codes so I was wondering if there was a cheaper option, but I don't want any shitty "VN" variant of like an A4 or A3.[/QUOTE] If you want aesthetics only the new production JG M16A1s are not bad.
Can anyone point me to an M1612 upper that would fit my G&G. Been thinking about doing an Early 90's loadout do go along with my early 2000's one, but I would need an A2 and I kinda dont want to buy another AR so I was just going to convert my AEG m4.
Piecing together my first CQB loadout, have posted elsewhere. Can you guys recommend some decent quality CQB options in the 150$ range? Currently looking at the Tri-shot, but I'd really like a semi-automatic option.
[QUOTE=Joetehpsycho;40002781]Piecing together my first CQB loadout, have posted elsewhere. Can you guys recommend some decent quality CQB options in the 150$ range? Currently looking at the Tri-shot, but I'd really like a semi-automatic option.[/QUOTE] Galaxy MP5K, high quality and low price
Aren't the MP5K's harder to get now because the trades recall by H & Gay?
Any ideas on a good place to get one?
as much as I hate to recommend it, I think Airsplat still has some [editline]22nd March 2013[/editline] I just checked, they do
Sorry, you need to Log In to post a reply to this thread.