The Official Questions Thread V. POST YOUR FUCKING QUESTIONS HERE DONT MAKE A FUCKING THREAD DUMBASS
997 replies, posted
[QUOTE=Ninja Duck;40102848]Says there's 4 more available, it's not all accurate gear but it's cheap so go for it.[/QUOTE]
AHHHH I see whats going on. the price is for individual pieces of kit, you can choose which piece you want. You can select the buttpack for gbp 25, etc..
okay, so thats not a good deal, nvm.
[QUOTE=notrabies;40100616]I believe it already has a bipod adapter, or a space one can be installed. I was playing around with my friend's yesterday, and it had one in between the rail and barrel.[/QUOTE]
Ok, thanks. :)
[QUOTE=YCheez;40102840]What sorbopad should I get? I have an m100 spring and will probably go for a high-speed build at some point. Also
So apparently my order to hobbyking never went through or something, so I tried to order again and the battery I would be getting is out of stock. Also I'm planning on rewiring the gun. Any ideas on what to do? I'm looking at 16AWG wire right now.
battery I planned on getting: [url]http://www.hobbyking.com/hobbyking/s...SOFT_Pack.html[/url]
wire: [url]http://www.hobbyking.com/hobbyking/s..._1mtr_Red.html[/url] +black
pls help[/QUOTE]
70D, always 70D
[url]http://shop.ehobbyasia.com/aeg/jm-m4-urx-rifle-aeg.html[/url] Thoughts on this gun? Looks pretty cool and has nice specs for it's price. However I am not familiar with the brand JM.
Don't think any of us is, would stay away from it if I were you
also dat rusted dummy bolt
[QUOTE=apoctank;40106831]70D, always 70D[/QUOTE]
Aren't you supposed to get 40D for low-power springs? I'm primarily getting it for it's sound-deadening effect and to correct AOE, since I highly doubt an M100 can too much stress on a V3 gearbox and deform a 40D sorbopad. I mainly need to know what thickness I need.
dat rusted front pin too
are those notorious for being like that or did they just decide to take a picture of the ugliest, shittiest condition gun they had lying around?
i'd put money on that being the oem of the matrix sr15
[QUOTE=YCheez;40107625]Aren't you supposed to get 40D for low-power springs? I'm primarily getting it for it's sound-deadening effect and to correct AOE, since I highly doubt an M100 can too much stress on a V3 gearbox and deform a 40D sorbopad. I mainly need to know what thickness I need.[/QUOTE]
You can probably get away with a 40D, but the thickness varies more under pressure than a 70D, making AoE correction slightly more difficult
How's this instead of the AIM SVD? Is it worth a shit?
[URL="http://www.evike.com/product_info.php?products_id=37098"]http://www.evike.com/product_info.php?products_id=37098[/URL]
Sorry if it's already been addressed in the thread I can't remember.
Ares is generally awful. If you'd like a g36, go JG or SRC. I'm unsure of how the quality on the KWA is.
[QUOTE=FOXHOUND;40108820]How's this instead of the AIM SVD? Is it worth a shit?
[URL="http://www.evike.com/product_info.php?products_id=37098"]http://www.evike.com/product_info.php?products_id=37098[/URL]
Sorry if it's already been addressed in the thread I can't remember.[/QUOTE]
Ares=oh god no.
I still need to know what thickness sorbopad I need. I corrected the AOE on my piston by removing the 2nd tooth and shaving the 3rd halfway if thats any help.
I use 40d 3/16ths
Do I remove the piece of rubber thats on the stock cylinder head and superglue the sorbopad? Also teflon taping, yes or no or should I go get a metal double o-ring cylinder head?
yes
both
[editline]31st March 2013[/editline]
the scatterplot sorbos fit perfectly onto shs heads
Does anyone know where to find PT body armor replicas in stock?
[editline]31st March 2013[/editline]
in black
[QUOTE=the_killer24;40109121]yes
both
[editline]31st March 2013[/editline]
the scatterplot sorbos fit perfectly onto shs heads[/QUOTE]
Where to find SHS heads? Clandestine is out and I'm assuming hivemind doesn't carry them.
[QUOTE=Herfjotur;40108852]Ares is generally awful. If you'd like a g36, go JG or SRC. I'm unsure of how the quality on the KWA is.[/QUOTE]
I got the JG G36K twice because both times I got it brand new and it didn't even work out of the box it was the worst gun I've ever bought. the scopes on both were way fucked up too. So I took it back and got a black ops 1911 (amazing gun) and a bunch of gear
But my buddy got a JG G36 with the full metal RIS and that was one of the best stock guns I've ever seen it was Insane only 180$ too, it's dead now tho RIP
you are literally the only one here
you got a shitty one, buy another
i ran mine over and it still works like a charm
I sold my 6 year old,heavily used,JG G36c to Deathmog a little while ago and it works fine.
I got two bunk JG G36ks in a row
But other than that every other version I've seen is tits
[editline]31st March 2013[/editline]
[QUOTE=the_killer24;40109519]you are literally the only one here[/QUOTE]
I'm not making anything up that shit happened :/
[QUOTE=Herfjotur;40108852]Ares is generally awful. If you'd like a g36, go JG or SRC. I'm unsure of how the quality on the KWA is.[/QUOTE]
Surprisingly, the KWA is the best one by far. That's literally the only time I've said that about a KWA product.
Running an m100 spring, and I don't plan on short-stroking. Are these all good for my hi-speed build? I'm getting an 11.1v lipo once hobbyking finally restocks it as well as a hi-torque motor.
[url]http://clandestineairsoft.com/scatterplot-laser-cut-sorbo-pads-c-1_6_18/scatterplot-sorbo-for-v2v3-gearboxes-316-thick-40-duro-p-42.html[/url]
[url]http://clandestineairsoft.com/zci-gears-c-1_6_30_47/zci-131-cnc-steel-gears-p-302.html[/url]
[url]http://clandestineairsoft.com/all-buckings-c-1_41_46/lonex-50-degree-soft-hopup-bucking-p-259.html[/url] I've decided I'm not gonna get an r-hop yet, so I'm just gonna get a replacement bucking.
Thoughts on where I could get a good cylinder head like SHS?
Hi speed as far as what? You don't want 40d for anything above 30rps. What kind of 11.1? Deans? Xt60? Tamiya? Anything Marketed as "Bravo" is Lonex or SHS, I believe.
[QUOTE=Kath;40111226]Hi speed as far as what? You don't want 40d for anything above 30rps. What kind of 11.1? Deans? Xt60? Tamiya? Anything Marketed as "Bravo" is Lonex or SHS, I believe.[/QUOTE]
The LiPo will be at 25~50C Turnigy nano-tech, and I will be rewiring to deans. I may later do a complete rewire with 16 AWG wire and a MOSFET. I'm not too sure what RPS I'll get although I doubt I'll get over 30 rps in the near future. Also I will try to swiss cheese my piston a bit.
EDIT: They're not bravo gears, they're ZCI if that was what you were referring to.
Has anyone ever ordered off Army Panda? It has really cheap prices for BDU's, but I'm a little untrusting.
[url]http://armypanda.com/[/url]
Are steel barrels on aluminum slides a bad idea?
[QUOTE=Dark Descent;40113616]Are steel barrels on aluminum slides a bad idea?[/QUOTE]
Not a smart idea, but not always terrible. My glock has a steel barrel, and while it has eaten into the aluminum slide a bit, its still pretty much fine.
It also depends on what kind of pistol you're using it in, as barrels take different amounts of stress based on the overall design.
[editline]31st March 2013[/editline]
What's most important is brand compatibility between barrel and slide. Always go with either a well tested combination, or a single company, preferably in a slide/barrel kit.
Is there a good working radio out there? Or is it possible to use walkies talkies?
Which do you recommend?
Sorry, you need to Log In to post a reply to this thread.