The Official Questions Thread V. POST YOUR FUCKING QUESTIONS HERE DONT MAKE A FUCKING THREAD DUMBASS
997 replies, posted
Who makes the best ar15 midcaps
[QUOTE=/Vandy/;39757470]Best AK drum mag on a budget?[/QUOTE]
Buy my MAG for $70 + shipping. Never fielded.
Elite Force apparently. Well I'm sure G&G's midcaps are even higher quality being metal and all and having a mechanism to feed every last bb, but the price difference is pretty big. I had MAG mags and I like these Elite Force mags much better.
[QUOTE=Ninja Duck;39756469]You upgrading your CM040 too?
Don't get the imax charger along with the smaller things or else the shipping will skyrocket. I ordered the small stuff from HobbyKing and the shipping went all the way down to $5.99 then I ordered the Thunder AC6 (Cotton and dwt have this model (and Kath)) from HobbyPartz and I saved a good amount of money.
[URL]http://www.hobbypartz.com/thac6smbachw.html[/URL]
Other than that I ordered the same deans and battery, now I just wait the long wait for them to come in. My charger has already shipped out from CA, I live in MA so that'll probably be around a week.[/QUOTE]
Alright, sounds good? Also Massbros unite.
[QUOTE=notrabies;39756441]Not if you like anything related to performance in any way.[/QUOTE]
Disagree, you just need to work with the shitty magazine, I currently get 35+ shots off my we single stack after a teflon mod.
[QUOTE=Ccharlton;39757619]Disagree, you just need to work with the shitty magazine, I currently get 35+ shots off my we single stack after a teflon mod.[/QUOTE]
Even so, I fail to see how this makes it any better than a hicapa when you can do the same mod to a hicapa, and then the hicapa will still hold the same amount or more bb's, as well as even more gas.
Both pistols offer very similar performance otherwise, but the Hicapa definitely has more aftermarket support.
[QUOTE=notrabies;39757677]Even so, I fail to see how this makes it any better than a hicapa when you can do the same mod to a hicapa, and then the hicapa will still hold the same amount or more bb's, as well as even more gas.
Both pistols offer very similar performance otherwise, [B]but the Hicapa definitely has more aftermarket support[/B].[/QUOTE]
wat
nothing in your post supports that claim.
and just because you need more rounds in the mag doesnt make the thing any better. if that was the case then my cheap 5000 rd box mag would be [B]better[/B] than all your midcaps combined.
[QUOTE=stabbytheghost;39757174]So I got my GP M16a1 and went to go shoot it but when I did the bb would take a hard drop at around 100'. My battery was barely charged so I don't know wether that was the cause of it or is it that the gun isn't broken in yet or has excessive silicon on it or what. The weight bb I was using was. 25g. What do you guys think is the reason it is dropping hard at such close distances?[/QUOTE]
I had the same thing happen with my G&P M4 when it was new, I'm pretty sure it's all because of the hop up. When I get that working for me, the gun works flawlessly. Maybe you should take a look at the hop up and make sure everything is normal and that turning the adjustment raises the tiny rubber nub correctly. I noticed in mine the nub was at a slant so I made it level by pushing it down very lightly with a small screwdriver. It could be that stuff gets bounced around in shipping or something.
[QUOTE=Heldure;39759339]wat
nothing in your post supports that claim.
and just because you need more rounds in the mag doesnt make the thing any better. if that was the case then my cheap 5000 rd box mag would be [B]better[/B] than all your midcaps combined.[/QUOTE]
dude, you're high as shit if you don't notice the MASSIVE amount of hicapa parts on basically every website.
[QUOTE=Heldure;39759339]wat
nothing in your post supports that claim.
and just because you need more rounds in the mag doesnt make the thing any better. if that was the case then my cheap 5000 rd box mag would be [B]better[/B] than all your midcaps combined.[/QUOTE]
[url]http://www.evike.com/index.php?cPath=26_127&sort=3a&page=1[/url]
Man, I wish there were some hi capa parts available. They're so hard to find.
[QUOTE=Heldure;39759339]
and just because you need more rounds in the mag doesnt make the thing any better.[/QUOTE]
Actually, yes it does make it better. If you take two almost identical guns with roughly the same ballistic performance, and said that one can fire twice as many shots before reloading, it would be the better choice.
[QUOTE=stabbytheghost;39757174]So I got my GP M16a1 and went to go shoot it but when I did the bb would take a hard drop at around 100'. My battery was barely charged so I don't know wether that was the cause of it or is it that the gun isn't broken in yet or has excessive silicon on it or what. The weight bb I was using was. 25g. What do you guys think is the reason it is dropping hard at such close distances?[/QUOTE]
Your battery won't change the actual performance at all, just whether or not and how quickly it can fire. It sounds like either your hop-up isn't engaging properly, or if you just lubricated it it's probably too slick to function and you'll just need to put a hundred or so rounds through it before it'll work fine. If that doesn't do it, though, I would suggest a disassembly. You can get at the hop-up and barrel without touching the gearbox.
[QUOTE=Herfjotur;39755139]The barrel extension.[/QUOTE]
An update to this: The DBOYS SCAR-H barrel extension is removable, but is 14-, just like the flash hider. In the process of removing the barrel extension, I believe I have permanently affixed my flash hider.
[QUOTE=notrabies;39763024]Actually, yes it does make it better. If you take two almost identical guns with roughly the same ballistic performance, and said that one can fire twice as many shots before reloading, it would be the better choice.[/QUOTE]
Meh I prefer the slimmer grip.
[QUOTE=catbarf;39763167]Your battery won't change the actual performance at all, just whether or not and how quickly it can fire. It sounds like either your hop-up isn't engaging properly, or if you just lubricated it it's probably too slick to function and you'll just need to put a hundred or so rounds through it before it'll work fine. If that doesn't do it, though, I would suggest a disassembly. You can get at the hop-up and barrel without touching the gearbox.[/QUOTE]
Yeah I wasn't sure if the battery was part if it but I was trying to put out all the variables that might have contributed to the lack of performance. Any way I removed the barrel and hop up assembly and saw there was already an abundance of silicon oil in the barrel so I cleaned that out and shot a few hundred rounds. The performance has increased dramatically since I did that. Thanks for the help.
[QUOTE=Dark Descent;39761912]dude, you're high as shit if you don't notice the MASSIVE amount of hicapa parts on basically every website.[/QUOTE]
I can make the same argument by posting a link to all the single stack parts. there's MASSIVE amounts available for that as well. though I admit I was half asleep when I read that post and hopped up on chicken express's gravy being shot into my veins.
A lot of parts for hicapas fit into single stacks. Most 1911 parts are made for hicapa raceguns. Slide parts are completely interchangeable between the two iirc while most things for the lower cannot be changed due to the difference in assembly and width. Like magwell extensions or hicapa grips
most of it yeah, and I think raceguns are the primary reason Hicapas have so many parts. like I said, I was tired and not sure why I even posted. I like single stack you like hicapas, they both shoot little plastic balls and ohmygodimsosorry.
honestly hi capas look awful though.
I have a single stack babe. I want to build a hicapa though but not in the style of a racegun, I want like a black and tan 1911
[QUOTE=Heldure;39765772]most of it yeah, and I think raceguns are the primary reason Hicapas have so many parts. like I said, I was tired and not sure why I even posted. I like single stack you like hicapas, they both shoot little plastic balls and ohmygodimsosorry.
honestly hi capas look awful though.[/QUOTE]
Airsoft 1911s don't work well
Hicapa's and 1911's are both less cool than Glocks as far as I'm concerned.
That is probably the single most polarizing statement ever typed.
naw nigga, your G34 is hot as hell <3
Are KWA singlestack 1911's any good?
no
Are there any good green gas single stack 1911's?
tokyo marui
Nothing else?
My friends and I are getting into airsoft and Im thinking about getting a JG Star Thunder Maul. Only problem is I want to slap a sight on it, but it has no tac rail, so I was wondering what mount would work best. Any help would be great. Cheers.
please don't waste your money on that plastic blob
[editline]2nd March 2013[/editline]
if you do (dear god) then any m4/m16 carry handle rail should work
[QUOTE=the_killer24;39772532]please don't waste your money on that plastic blob
[editline]2nd March 2013[/editline]
if you do (dear god) then any m4/m16 carry handle rail should work[/QUOTE]
Its either that or a JG RL8, JG 552 Commando, or an S&T TAR-21. Yes im well aware of the quality of JG's.
Sorry, you need to Log In to post a reply to this thread.