• The Official Questions Thread V. POST YOUR FUCKING QUESTIONS HERE DONT MAKE A FUCKING THREAD DUMBASS
    997 replies, posted
[QUOTE=Ninja Duck;39816393]Lmao, anyone remember the reason why I couldn't get the G&P XM187e2? (dad didn't want to order overseas) [URL]http://www.evike.com/product_info.php?products_id=41662[/URL] It's on Evike now but at $280. I suppose the ehobbyasia version is the real deal though? Anyways, since I'm probably not buying any new aeg anytime soon I thought I could satisfy myself and save money by getting slim handguards, small stock, and flash hider. I've found the stock: [URL]http://www.evike.com/product_info.php?cPath=25_95&products_id=27337[/URL] The flash hider: [URL]http://www.evike.com/product_info.php?products_id=27111[/URL] (a bit expensive) But not the slim handguards, only a full conversion kit: [URL]http://www.evike.com/product_info.php?products_id=33119[/URL] But the price really climbs here, and if I got the front end conversion kit I'll probably have to get a different inner barrel (and spring?). That'd be like paying the price of the XM177E2 on ehobbyasia but only for aesthetic parts. Does anyone know where I can get these things cheaper? It's the whole reason I'm even looking for them, or else I'd just be buying the E2 right now. Maybe I'd be better off saving and buying the e2 another time to have the complete gun, I don't know. I'd be using that lipo I bought for my AK in the stock, if it's too long the stock will be on the 3rd/4th setting anyways, but if the connectors can't reach I'll have to figure something out.[/QUOTE] You would need a new upper too, the carrying handle is different plus there is no foward assist on the XM177
[QUOTE=notrabies;39816252]Preeeetty compatible.[/QUOTE] Omg I'mma make this gun hot. Or it'll explode. Counting on the latter. :v:
[QUOTE=dwt110;39816396]does the oregon aero helmet kits thingy work in IBH helmets? and which one am I supposed to get, the blss or blu?[/QUOTE] oregano pads
Quick question: Where would I find a G36 dual optic? (Obv replica because 2poor)
[URL]http://www.evike.com/product_info.php?cPath=25_90&products_id=37669[/URL] [editline]6th March 2013[/editline] or in blapk [URL]http://www.evike.com/product_info.php?cPath=25_90&products_id=37668[/URL]
Wo, never knew evick had that shit Says S&T though, so a bit nervous I'm thinking of nabbing a WE G36K, since I've always wanted a gbbr and a non-c length G36. AEX has WE G36s for pretty cheap
[QUOTE=The Ultimate;39816533]You would need a new upper too, the carrying handle is different plus there is no foward assist on the XM177[/QUOTE] I was thinking more of an M4/XM mix with the parts. If I added on the upper I'd be better off buying the entire gun off ehobby instead. [Editline].[/Editline] Like this: [screw this pic it's not what I wanted]
[QUOTE=Kill001;39817861]non-c length G36.[/QUOTE] I suddenly like you even more C:
[QUOTE=Kill001;39817861]Wo, never knew evick had that shit Says S&T though, so a bit nervous I'm thinking of nabbing a WE G36K, since I've always wanted a gbbr and a non-c length G36. AEX has WE G36s for pretty cheap[/QUOTE] Be aware that the recoil will likely be misaligning all of your pretend airsoft optics. The WE GBBR's are notorious for making chinashit cry. Here's a thread that's trying to document what works: [url]http://www.arniesairsoft.co.uk/forums/index.php?/topic/206136-optics-what-takes-the-knocks/[/url]
Anyone know of whom might have a GHK PDW in stock? I've been hunting and all I've found are out of stock and "discontinued" statuses which concerns me greatly.
[QUOTE=Ninja Duck;39818617]I was thinking more of an M4/XM mix with the parts. If I added on the upper I'd be better off buying the entire gun off ehobby instead. [Editline].[/editline] Like this: [T]http://www.bradwarthen.com/wp-content/uploads/2013/01/AR15_A3_Tactical_Carbine_pic1.jpg[/t][/QUOTE] See but that's literally 110% an M4. There are no XM177 parts on there
aneifgSUGpgiffisghduasn oh wait that's not even the right stock or anything The bottom one: [t]http://i6.photobucket.com/albums/y227/1124/review2.jpg[/t] But I doubt I'll find the parts cheap, everywhere else they just add up so quickly.
Would I be able to transfer my junked WE outer barrel into the KJW hicapa? I want the threading on the end so I can use a suppressor
[QUOTE=Ninja Duck;39821760]aneifgSUGpgiffisghduasn oh wait that's not even the right stock or anything The bottom one: [t]http://i6.photobucket.com/albums/y227/1124/review2.jpg[/t] But I doubt I'll find the parts cheap, everywhere else they just add up so quickly.[/QUOTE] That's still just an M4. It's simply an early one
someone find me a 4x acog without the doctor sight that has good eye relief please?
Here you go [url]http://www.amazon.com/Trijicon-Rifle-Scope-Triangle-TA31A/dp/B000VB3ASC[/url]
[QUOTE=felix the cat;39822980]Here you go [url]http://www.amazon.com/Trijicon-Rifle-Scope-Triangle-TA31A/dp/B000VB3ASC[/url][/QUOTE] No, he wants the one with the Doctor sight mounted on top: [url]http://www.amazon.com/Scope-Illuminated-Crosshair-Ballistic-Reticle/dp/B0035M1HNY/ref=pd_sim_sbs_sg_3[/url] JEEZ
Aw jeez well I fucked that up. Thanks for backin' me up bro
[QUOTE=felix the cat;39822873]That's still just an M4. It's simply an early one[/QUOTE] I'm not talking about converting my gun to an XM, I just want the handguards and stock (and maybe the flash hider) to put on my G&P M4 instead of buying the G&P XM177E2. Like I said before, I don't know where I can find the parts cheaper. I don't want to spend $100 for a front end conversion when all I want are the handguards, or $40 on a full stock kit when all I need is the actual plastic stock.
handguards [url]http://www.del-ton.com/Handguards_p/hg1014.htm[/url] and you're gonna have to buy the G&P stock set because real ones are $100+
now I'm more than confident in my ability to fix things is this worth it: [URL]http://www.airsoftmegastore.com/8046-Boneyard---JG-Full-Metal-Gearbox-R36C-Tactical-AEG-Rifle-MK36.aspx[/URL] I know these are discontinued now but I'm definitely sure I could fix whatever is wrong with it, if anything. and does pretty much every G36 mag work with it?
why not buy a G&P xm177?lol
Every mag except CA works fine. Also you can buy it and sell parts, you can gain profit. (Fix everything, huh? Weld Zn/AL body)
[QUOTE=CzeczenGrozny;39823752]Every mag except CA works fine. Also you can buy it and sell parts, you can gain profit. (Fix everything, huh? Weld Zn/AL body)[/QUOTE] i don't think they'd be selling shit that requires you to weld zinc and aluminum
Belive. Seriously, buy it and make some custom shit. Like blaster or something.
[QUOTE=draugur;39821100]Anyone know of whom might have a GHK PDW in stock? I've been hunting and all I've found are out of stock and "discontinued" statuses which concerns me greatly.[/QUOTE] [url]http://samoon.com.tw/gbb-airsoft-gun/pdw/2012-new-version-of-adjustable-hop-up-ghk-pdw[/url] official ghk distributor
Hey, how wide are these shoulder velcro areas? I'm not at home so I can't measure. About 4" or something? Going to design a Great Fox patch and don't want it too big or too small. [IMG]http://puu.sh/2dCrV[/IMG] Or a photography patch or something
i got you bro, they're 4x6 [editline]7th March 2013[/editline] inches the velcro panel on the flap is 4x2 inches
[QUOTE=felix the cat;39821555]See but that's literally 110% an M4. There are no XM177 parts on there[/QUOTE] It's not 110% m4, because of the oldschool pencil barrel but yeah it's definately not anything related to an XM. [QUOTE=Ninja Duck;39823275]I'm not talking about converting my gun to an XM, I just want the handguards and stock (and maybe the flash hider) to put on my G&P M4 instead of buying the G&P XM177E2. Like I said before, I don't know where I can find the parts cheaper. I don't want to spend $100 for a front end conversion when all I want are the handguards, or $40 on a full stock kit when all I need is the actual plastic stock.[/QUOTE] If you want an XM177 stock [URL]http://www.evike.com/product_info.php?products_id=27337[/URL] Although you can probably pick up a standard m4 stock like in the pictures you linked second-hand for next to nothing since people swap them out for more fancy stocks. You can probably file down the little tabs on them to make it like an XM177 stock.
Does anybody know where to get an old Vietnam Flight Crew Chicken Plate vest? Picture for reference [IMG]http://www.vietnamgear.com/Imagevwr.aspx?img=airarmor1.jpg&w=200&h=200[/IMG]
Sorry, you need to Log In to post a reply to this thread.