• General Discussion V5: Motorized chairs edition.
    6,033 replies, posted
something is eating away my accords paint job even more. Some white shit was on my car prior to the snow storm and literally chewed off the clear coat and paint and left this white stain. and now it seems my side is suffering the same thing. Time to get it painted i guess
[QUOTE=Siminov;39037630]We have a 2008 5 series. Nuuuu[/QUOTE] You should have gotten the 7 series. ;p
[QUOTE=Banana Lord.;39035311]out of curiosity, are BMWs expensive to maintain? ie. a 2002 or 1994[/QUOTE] yes [editline]31st December 2012[/editline] [QUOTE=EvilSkydiver;39039282]You should have gotten the 7 series. ;p[/QUOTE] you're silly
Only BMW I would ever own. [t]https://dl.dropbox.com/u/1031910/DSCN2206.jpg[/t] The licence plate even has the first 3 of my Audi's plates and my name :v:
[QUOTE=RobyYe;39037830]lol codemasters threw out cockpit camera for Grid 2 because no one used it in Grid.[/QUOTE] You've got to be kidding. It was the only camera I used.
oh hey guys straight piped (glasspack) the miata a few days ago got rear ended in traffic today that's about all that's new.
Oh hell yeah, I had a glasspack in lieu of the muffler on my NB and it sounded dericious. Have you done an intake yet? A short ram intake can completely change the sound of that car into a nasty little animal. [video=youtube;YtLkrwLgB_E]http://www.youtube.com/watch?v=YtLkrwLgB_E[/video]
[QUOTE=Aetna;39041468]Oh hell yeah, I had a glasspack in lieu of the muffler on my NB and it sounded dericious. Have you done an intake yet? A short ram intake can completely change the sound of that car into a nasty little animal. [video=youtube;YtLkrwLgB_E]http://www.youtube.com/watch?v=YtLkrwLgB_E[/video][/QUOTE] Glasspacks ftw, that's what I am running on the lolvo
[QUOTE=Siminov;39042540]Glasspacks ftw, that's what I am running on the lolvo[/QUOTE] So jelly, if I had glass packs on my mustang then I could go rolling with the kool kids. ;p Flowmasters~ ftw
Flowmaster > Glasspack Flowmaster makes anything sound better.
Finally going to pick up my motorcycle tomorrow! It's been sitting for about a year and needs a new battery and the carbs cleaned... but for $1100 I'm not really complaining. '07 Ninja 250R with 7k on the clock, also came with a helmet and gloves. I'll post pics tomorrow after I get her cleaned up. [img]http://filesmelt.com/dl/IMAG0828.jpg[/img]
[QUOTE=RobyYe;39037830]lol codemasters threw out cockpit camera for Grid 2 because no one used it in Grid.[/QUOTE] ......................I used it...
[QUOTE=Aetna;39044572]Finally going to pick up my motorcycle tomorrow! It's been sitting for about a year and needs a new battery and the carbs cleaned... but for $1100 I'm not really complaining. '07 Ninja 250R with 7k on the clock, also came with a helmet and gloves. I'll post pics tomorrow after I get her cleaned up. [img]http://filesmelt.com/dl/IMAG0828.jpg[/img][/QUOTE] nice for the year and mileage. I got a 98 for 800 bucks but I have to replace the valve cover gasket, clean carbs, change front fork seals, and fix a fairing (partially my fault).
[QUOTE=Koenigsegg;39044626]......................I used it...[/QUOTE]<25% used it, so they just threw it out. I used it for everything though.
Pretty sure this is the muffler I have on my pickup, might be the longer one though...Magnaflow Glasspack [media]http://www.youtube.com/watch?v=rI9xMMAPw2E[/media] Nope, it's the longer one. It's quieter, but still sounds good. [editline]31st December 2012[/editline] And I don't like Flowmasters. [editline]31st December 2012[/editline] Just kidding it's this one. p/n 12641 Mines a bit(much) louder than the one in this video. Never mind that mine is an old Chevy, and this one is a new Ford. [media]http://www.youtube.com/watch?v=znyljHemygg[/media] There's a video of a newer V6 accord coupe with the same muffler straight off the y pipe I think somewhere on youtube I remember seeing.
That feel when unaligned front end trying to drive 35 MPH. That feel when tire goes flat while pumping gas. That feel when JDM B16A trans you got for free has no grinds. (Thanks Jap) That feel when B18 runs awesome and your baby is moving under its own power again. That feel when more work to be done...
[QUOTE=bradley;39046719]That feel when unaligned front end trying to drive 35 MPH. That feel when tire goes flat while pumping gas. That feel when JDM B16A trans you got for free has no grinds. (Thanks Jap) That feel when B18 runs awesome and your baby is moving under its own power again. [b]That feel when more work to be done...[/b\[/QUOTE] Everytime I'd replace a part on my BMW I'd feel this. A few, brief moments of pure bliss, and then, "Fuck, I still need to fix that... and this... and that shit too... fuck..."
There's the accord videos, using the Muffler I have on my truck, as a resonator off the Y pipe. :v: [url]http://www.driveaccord.net/forums/showthread.php?t=49939[/url] [quote]06 6MT open Ypipe!! Hey guys...I haven't posted much on here recently. As far as mods go, I have: Fujita CAI RV6 V1 Jpipe/test pipe RV6 PCDs P2R ported intake manifold 3 inch catback This is a video of the car open ypipe. It's loud! I am in the process of getting new mufflers, which is why I went open ypipe I previously had 2 Dynomax VT mufflers and they sounded okay, but at idle there was a horrible clanging noise. So I am sending them back to Dynomax for a refund and should have mufflers shortly. I am 99.999999% sure I'm going single 3 inch. My friend @ work had a Dynomax bullet resonator which I will be using. I am gonna buy 1 more bullet and put them both after my huge Magnaflow 12641 resonator. Hopefully it sounds good! Anyway, here are the open ypipe vids [url]http://s32.beta.photobucket.com/user/Sonnick/media/MOV00810.mp4.html[/url] [url]http://s32.beta.photobucket.com/user/Sonnick/media/MOV00811.mp4.html[/url] [url]http://s32.beta.photobucket.com/user/Sonnick/media/MOV00812.mp4.html[/url] [url]http://s32.beta.photobucket.com/user/Sonnick/media/MOV00813.mp4.html[/url] [url]http://s32.beta.photobucket.com/user/Sonnick/media/MOV00814.mp4.html[/url] [url]http://s32.beta.photobucket.com/user/Sonnick/media/MOV00815.mp4.html[/url][/quote]
How much do you guys reckon it would cost to have some really small brackets milled for a really tiny engine? (25cc)
Happy new years AA
2012 was a shitty year for me and the supra 2013 started real nice, with waitress making out with each others and shits. yup.... but still forever alone forever drunk forever poor forever fp aa
>poor >1JZ swapped Supra Bitch, I drive a shitty '90 Civic with a junkyard B18 in it that still needs work. Don't you be saying you're poor. YOU'RE A DRUNKEN FOOL!
I groped boobies tonight
Progress update on de dort aka project satan. [thumb]http://i1067.photobucket.com/albums/u423/Lawblind/E49B7268-0959-400A-ADEC-33660B7D4F88-246-00000028F78ABE88.jpg[/thumb] [thumb]http://i1067.photobucket.com/albums/u423/Lawblind/953DEE8B-3C04-4E8A-885C-6EFA7185986D-246-00000028FD585DAF.jpg[/thumb] All I have left is some small stuff and the roof which I hope to knock out tomorrow, then ill be done as far as paint removal goes to the main body section. After that is done i have to get the trunk lid, doors, and front fenders done but they shouldn't take too long. And I haven't sanded the passengers quarter because that abomination is being cut off and replaced. [editline]1st January 2013[/editline] Ive done quite a bit since I last posted about the dart actually, mounted on this roller, blasted all the underside and most of the hard to get places, at least I think I haven't mentioned all that. [editline]1st January 2013[/editline] And 2012 was quite the year, got my license, got the dart, improved my self confidence greatly, started working out, made a good amount of dosh, learnt a bunch of neat things, I'm pretty happy.
[QUOTE=Concur;39051855]I groped boobies tonight[/QUOTE] Me too high five
Bonus points if you didn't score :c
Found this gem, on 'Car Domain' seems more like Rice Domain, the way he describes his car is unbelievable. You really must see for yourself. [url]http://www.cardomain.com/ride/3832020/1995-toyota-camry/[/url]
happy new year aa
[QUOTE=Koenigsegg;39050339]How much do you guys reckon it would cost to have some really small brackets milled for a really tiny engine? (25cc)[/QUOTE] call up a local machine shop and tell them what you need and the sizes you need, give them dimensions and the material you want. They will give you a price.
[QUOTE=bradley;39051737]>poor >1JZ swapped Supra Bitch, I drive a shitty '90 Civic with a junkyard B18 in it that still needs work. Don't you be saying you're poor. YOU'RE A DRUNKEN FOOL![/QUOTE] half assed 1jz swapped pos box
Sorry, you need to Log In to post a reply to this thread.