[QUOTE=Protocol7;35916443]i don't know what any of that means so I'll just nod and say yes[/QUOTE]
Tailgate them, then rev up high with no muffler, then pass while glaring.
[QUOTE=kart22racer;35916523]Tailgate them, then rev up high with no muffler, then pass while glaring.[/QUOTE]
that makes sense
ty
I'm actually quite skeptical of the build quality in ebay jdm tyte doriftu NRG fake steering wheels.
I bought one for $60. Maybe I should have gotten an original Sparco
[QUOTE=sHiBaN;35916579]I'm actually quite skeptical of the build quality in ebay jdm tyte doriftu NRG fake steering wheels.
I bought one for $60. Maybe I should have gotten an original Sparco[/QUOTE]
eBay build quality is mediocre at best. You can trust it to anything non-essential though. eBay CAI? Sure. eBay Headlights? Sure. eBay Suspension? Uh... no thanks.
[QUOTE=Tukimoshi;35916600]eBay build quality is mediocre at best. You can trust it to anything non-essential though. eBay CAI? Sure. eBay Headlights? Sure. eBay Suspension? Uh... no thanks.[/QUOTE]
Would you think it's ok for something like daily driving, highway usage?
Anything is better than the stock steering wheel I have but it shouldn't pose much of a danger if I use this POS ebay tyte one?
in before it breaks off the spokes, or the spokes break off the middle, that'd be great.
[QUOTE=Psygo;35916713]in before it breaks off the spokes, or the spokes break off the middle, that'd be great.[/QUOTE]
That's what I thought. I'll be getting it in the mail in about a week. I'll put it in my S13 and do the gangster lean test on it.
Pretty sure it will bend but hoping it won't as the $60 could have been spent on some nice iridium sparkplugs instead of chinese NRG knockoffs
[QUOTE=sHiBaN;35916579]I'm actually quite skeptical of the build quality in ebay jdm tyte doriftu NRG fake steering wheels.
I bought one for $60. Maybe I should have gotten an original Sparco[/QUOTE]
I couldve sold you mine, I switched it out for a used momo.
They are kinda solid, the metal is thin and the grip is thick, horn is ok but the screws that come with the wheel are shit.
[video=youtube;SMxB4RpCDzA]http://www.youtube.com/watch?v=SMxB4RpCDzA[/video]
Fuck I just wasted that $60 didn't I
[QUOTE=kart22racer;35916523]Tailgate them, then rev up high with no muffler, then pass while glaring.[/QUOTE]
"blast up to their rear door"
i speed up to their rear door
"push the clutch in"
its this cool 3rd pedal manuals have
"throw some sikk broken muffler revs"
My muffler is broken, while i coast past them i rev it up like bam bam bam and they look quite buttdevastated.
I dont tailgate unless its a no passing zone and they are going 10+ under
[QUOTE=sHiBaN;35917032][video=youtube;SMxB4RpCDzA]http://www.youtube.com/watch?v=SMxB4RpCDzA[/video]
Fuck I just wasted that $60 didn't I[/QUOTE]
ahahhhahahahaha yeah you did.
Wow, that's scary.
[QUOTE=sHiBaN;35917032][video=youtube;SMxB4RpCDzA]http://www.youtube.com/watch?v=SMxB4RpCDzA[/video]
Fuck I just wasted that $60 didn't I[/QUOTE]
holy shit that's... nice.
[B]FUCK[/B]
Wew, back from work after 5 days, finally home for two. And totally woke up this morning just to see full of snow everywhere.
Needless to say that coming back home (Work's 135km away from where I live) was pretty damn dangerous by areas.
carroll Shelby died
[url]http://content.usatoday.com/communities/driveon/post/2012/05/auto-legend-carroll-shelby-father-of-cobra-dies/1#.T610TcV0HD4[/url]
rest well sweet prince :(
[QUOTE=Concur;35917521]carroll Shelby died
[url]http://content.usatoday.com/communities/driveon/post/2012/05/auto-legend-carroll-shelby-father-of-cobra-dies/1#.T610TcV0HD4[/url]
rest well sweet prince :([/QUOTE]
To an automotive and racing legend: we salute you.
[QUOTE=Concur;35917056]"blast up to their rear door"
i speed up to their rear door
"push the clutch in"
its this cool 3rd pedal manuals have
"throw some sikk broken muffler revs"
My muffler is broken, while i coast past them i rev it up like bam bam bam and they look quite buttdevastated.
I dont tailgate unless its a no passing zone and they are going 10+ under[/QUOTE]
Thanks for the explanation on how manuals work, i totally never drive my truck.
[QUOTE=Concur;35917521]carroll Shelby died
[url]http://content.usatoday.com/communities/driveon/post/2012/05/auto-legend-carroll-shelby-father-of-cobra-dies/1#.T610TcV0HD4[/url]
rest well sweet prince :([/QUOTE]
He was an absolute legend. He will be missed.
[QUOTE=sHiBaN;35917032][video=youtube;SMxB4RpCDzA]http://www.youtube.com/watch?v=SMxB4RpCDzA[/video]
Fuck I just wasted that $60 didn't I[/QUOTE]
I'd say so. I wouldn't trust the fake to a lawn tractor.
[QUOTE=Protocol7;35913985]i can't comprehend why people find the concept of "keep right except to pass" so hard
excuse me while some middle aged woman in a white FJ Cruiser goes 5 under the speed limit in the left lane[/QUOTE]
Inorite? It's not rocket science. Even I manage to handle it right, I don't go over there at all unless I'm making 75(Which I usually do). Even then I don't ride over there unless I'm the only one on my side of the freeway for miles.
[QUOTE=sHiBaN;35917032][video=youtube;SMxB4RpCDzA]http://www.youtube.com/watch?v=SMxB4RpCDzA[/video]
Fuck I just wasted that $60 didn't I[/QUOTE]
They sell Grant steering wheels down at the local Knechts, they are decently priced and someone told me the quality was good enough.
[url]http://www.grantproducts.com[/url]
Summit probably sells them for dirt cheap.
R.I.P Caroll :(
I'm off to japfest tomorow. Anyone want pics?
Me and a mate are building a buggy from a VW bug frame and a 1200 engine (30 hp)
I can't believe how few hp it produces per cylinder.
7.5hp from 300cc, I mean, my moped is 50cc and produces about the same.
how did they squeeze so little from it?
[QUOTE=Disco_Potato;35903701][IMG]http://i54.photobucket.com/albums/g115/31337_tom/546113_10150765048770178_123558590177_9707344_126769315_n.jpg[/IMG][/QUOTE]Whats best about the Honda motor is that its the cheapest, probably the most reliable and you can have loads of fun with it.
[QUOTE=KillerTele;35919102]My and a mate are building a buggy from a VW bug frame and a 1200 engine (30 hp)
I can't believe how few hp it produces per cylinder.
7.5hp from 300cc, I mean, my moped is 50cc and produces about the same.
how did they squeeze so little from it?[/QUOTE]
low compression, weird valve/ignition timing, flat piston tops, could be anything really. I mean, those giant old industrial engines had cylinders bigger around than you are, and only produced ~5 hp.
[QUOTE=MightyMax;35919903]low compression, weird valve/ignition timing, flat piston tops, could be anything really. I mean, those giant old industrial engines had cylinders bigger around than you are, and only produced ~5 hp.[/QUOTE]
The 1200 has a rubbish compression, that I know. I suppose the rest is shit as well.
the car that I was supposed to get my 2jz from has been sold (so no partout)
damnit! I am madly crossed
How do they even make a wheel that bad? Did they make it out of aluminum foil?
[QUOTE=Officer brown;35920213]How do they even make a wheel that bad? Did they make it out of aluminum foil?[/QUOTE]
Lead with some outer coating. Really shitty.
[QUOTE=ThermalArc;35919972]the car that I was supposed to get my 2jz from has been sold (so no partout)
damnit! I am madly crossed[/QUOTE]
I know the feeling. Sucks too cause I was supposed to purchase like you and it was sold before I could.
Anyway, I'm selling my replica wheels to help pay for repairs on my 240SX. How much should I charge on some Drag DR-35? Thinking I can probably score $500-600 on some small gashes on one wheel. New, they sell for $550 for 4. What do you think?
[IMG]http://i13.photobucket.com/albums/a283/shiban/691129fa.png[/IMG]
I wanna start a steering wheel company and make like, 20 dollars.
Sorry, you need to Log In to post a reply to this thread.