Why is it okay for your sister to be a dick but it's not okay for you to be one?
If i had someone that was willing to do something for me in exchange for help with something, and then after helping them they backed out, I'd be pissed, and at the very LEAST undo what i did...I guess that's just me though. Oh well.
[QUOTE=justin1992;34689449]Why is it okay for your sister to be a dick but it's not okay for you to be one?
If i had someone that was willing to do something for me in exchange for help with something, and then after helping them they backed out, I'd be pissed, and at the very LEAST undo what i did...I guess that's just me though. Oh well.[/QUOTE]
Yeah it's hard to not just fuck them back over but in the end I'll go the route without her help. It just further proves I should just contiune on making myself Self Made/Built. Don't depend on anyone.
I went to a nissan dealership today, and saw the GT-R for the first time in person. They had the hood up and stuff and it was niiiiiiice. Too bad i don't have 96k
[editline]14th February 2012[/editline]
[url]http://oklahomacity.craigslist.org/ctd/2796227606.html[/url]
hey it's the spray painted 350z i saw.
[QUOTE=Dylan_94;34691524]I went to a nissan dealership today, and saw the GT-R for the first time in person. They had the hood up and stuff and it was niiiiiiice. Too bad i don't have 96k
[editline]14th February 2012[/editline]
[url]http://oklahomacity.craigslist.org/ctd/2796227606.html[/url]
hey it's the spray painted 350z i saw.[/QUOTE]
"EXELENT CONDITION"
Spelt wrong, and more importantly A LIE.
Just got a call from my uncle who is now working on my Corsa, been looking at what's wrong and boy are things wrong.
Handbrake problem - He said all of the cables are seized up and he's gonna need to strip it down or something to check for problems.
Banging noise when the car changes speed quickly - Drivers side 'wishbone' is totally deteriorated.
Rumbling noise when turning full lock - Apparently the passenger side CV joint is an ABS joint, and the right side isn't. My car doesn't have ABS. There are even wires and sensors going to it :/.
Loud timing chain - He said something about the oil filter and thickening up the oil to make it quieter.
He said he's gonna work on the main 'wishbone' job and others tonight and will come to around £115 for that.
[QUOTE=Dylan_94;34691524]I went to a nissan dealership today, and saw the GT-R for the first time in person. They had the hood up and stuff and it was niiiiiiice. Too bad i don't have 96k
[editline]14th February 2012[/editline]
[url]http://oklahomacity.craigslist.org/ctd/2796227606.html[/url]
hey it's the spray painted 350z i saw.[/QUOTE]
What kind of stupid fuck would do that to a 7 year old car?
[URL="http://www.ebay.co.uk/itm/2005-05-VOLKSWAGEN-POLO-/200710022798?#ht_2142wt_1396"]Does the dog come with the car?[/URL] :v:
[QUOTE=Chuushajou;34696155][URL="http://www.ebay.co.uk/itm/2005-05-VOLKSWAGEN-POLO-/200710022798?#ht_2142wt_1396"]Does the dog come with the car?[/URL] :v:[/QUOTE]
What the hell! I looked up this exact car last night on ebay, but never saw the dog!
Building the stock Ignition map for the Coyote
[IMG]http://i54.photobucket.com/albums/g115/31337_tom/Musang_ios_02_ign.png[/IMG]
That's kind of a jumpy looking start. Any reason for the weird jumps in advance?
[editline]14th February 2012[/editline]
Maybe "Jumps" isn't the word I'm looking for since they are lower but you get what I mean
So I learned that the cat in my jeep is being gay and causing my rough idle, loss of power, sulfur smell etc.
I'm in Florida and we have no inspection or whatever, should I just cut it off?
If you have no smog laws, whack it off. It won't hurt anything on your XJ. Everything I've owned save my EF and CRX haven't had the catalytic converter removed.
It's technically "illegal" to do so but most exhaust shops will do it for you. It's usually pretty cheap if you let them keep the catalytic converter as they are worth a little money.
Shit day
4 hours of this yesterday:
[t]http://i.imgur.com/EVqgJ.jpg[/t]
To attend this for 6 hours today:
[t]http://i.imgur.com/8o7yj.jpg[/t]
Then 4 hours of this back home, best picture I have of it:
[t]http://i.imgur.com/EtRSJ.jpg[/t]
Me and dad switched on driving so the pics are from when he was driving obviously.
Also the funeral was for my grandmother
[QUOTE=bradley;34696738]That's kind of a jumpy looking start. Any reason for the weird jumps in advance?
[editline]14th February 2012[/editline]
Maybe "Jumps" isn't the word I'm looking for since they are lower but you get what I mean[/QUOTE]
The holes are in areas that the engine wasnt in long enough for the OT-2 to capture. All of that to the right is high RPM low-load, which I wasnt in pretty much at all.
It doesnt really matter though because I can tune that in easily, most likely it just has lots timing thrown at it in that region to keep it from popping and backfiring on decel. I mostly just want to know what the timing profile is at WOT and while cruising around.
[QUOTE=Disco_Potato;34697509]The holes are in areas that the engine wasnt in long enough for the OT-2 to capture. All of that to the right is high RPM low-load, which I wasnt in pretty much at all.
It doesnt really matter though because I can tune that in easily, most likely it just has lots timing thrown at it in that region to keep it from popping and backfiring on decel. I mostly just want to know what the timing profile is at WOT and while cruising around.[/QUOTE]
Why even bother posting that stuff here man. You know this is way over their heads.
[QUOTE=Tw34k;34697596]Why even bother posting that stuff here man.[/QUOTE]
Lulz
I mostly wanted to test to see if my avatar updated >_<
[QUOTE=Disco_Potato;34697509]The holes are in areas that the engine wasnt in long enough for the OT-2 to capture. All of that to the right is high RPM low-load, which I wasnt in pretty much at all.
It doesnt really matter though because I can tune that in easily, most likely it just has lots timing thrown at it in that region to keep it from popping and backfiring on decel. I mostly just want to know what the timing profile is at WOT and while cruising around.[/QUOTE]
I know what the holes are, I meant the odd jump from 20+ degrees of advance to 10 or less, seems like a big gap to be dropping. Was this logged during a drive or a dyno session?
[editline]14th February 2012[/editline]
Also I finally realized who you are on DSO
There are a lot of thinsg going on. Its the actual ignition advance, not what is in the table, so its hard to say. But yah, its just from a series of WOT pulls on the street.
So, who am I?
^_^
EDIT:
30 to 56 in 2 seconds, w00t
[IMG]http://i54.photobucket.com/albums/g115/31337_tom/Mustang_WOTlog_02-1.png[/IMG]
too bad the capture rate is so damn slow
[QUOTE=Disco_Potato;34698155]So, who am I?
^_^[/QUOTE]
A person who unnecessarily uses dumb emotes
I have an urge to learn as much about cars as I possibly can
time to find somebody who can start teaching me
[QUOTE=Disco_Potato;34698155]So, who am I?
^_^[/QUOTE]
:| The only person who posts about OT-2 on DSO and also owns a 'stang. Duh.
Like I said, I browse DSO/H-T all the time. I just don't post there.
I guess you wernt kidding
:D
I have quite a few posts on DSO so Im sure youv've seen me around a bit. ( T3T)
( ̄▽ ̄)ノ_彡☆バンバン!!
Yeah, had no idea that was you. You're pretty well known there.
No, he's not. He's just some faggot with a slow miata.
Tw34k used to post a lot too but he's gotten burned out on it.
*:--☆--:*:--☆:仲良し(*・∀・)/♡\(・∀・*)だよ:--☆--:*:--☆--:
[QUOTE=Disco_Potato;34698561]Tw34k used to post a lot too but he's gotten burned out on it.
*:--☆--:*:--☆:仲良し(*・∀・)/♡\(・∀・*)だよ:--☆--:*:--☆--:[/QUOTE]
Kids these days.....
[QUOTE=Disco_Potato;34698561]
*:--☆--:*:--☆:仲良し(*・∀・)/♡\(・∀・*)だよ:--☆--:*:--☆--:[/QUOTE]
The fuck is this?
I like cars too guys
[QUOTE=Disco_Potato;34696545]Building the stock Ignition map for the Coyote
[IMG]http://i54.photobucket.com/albums/g115/31337_tom/Musang_ios_02_ign.png[/IMG][/QUOTE]
After seeing this I'm glad I won't have to do this on the 400R/A.
[QUOTE=Tw34k;34698585]Kids these days.....[/QUOTE]
Unnecessary dumb emoticon.
Sorry, you need to Log In to post a reply to this thread.