[QUOTE=No Party Hats;32419985]Long story short, a few 12 year old queers from IGN tried to raid us, they failed, me and a few other FPers went to just see what the issue was, what we did, and all the mods were getting upset at me here because I took to too far. But now everyone is cool again.
[editline]21st September 2011[/editline]
[media]http://www.youtube.com/watch?v=K75w6p7cKB8[/media] I listen to this every morning on my bus. It really gets me through the day.[/QUOTE]
they actually tried? I saw the "warning" and was laughing because it was essentially just one kid and some other kid who said that "We were talking shit" i thought he just got banned and crawled back to ign.
[editline]22nd September 2011[/editline]
[QUOTE=mysteryman;32419356]Guys, 18th birthday on friday, getting a watch still shopping around. Which one of these do you guys like the most?
[t]http://i.imgur.com/OWOhP.jpg[/t]
[t]http://i.imgur.com/tceE1.jpg[/t]
[t]http://i.imgur.com/zbIux.jpg[/t]
heart for watch 1
optimistic for watch 2
Tool for watch 3[/QUOTE]
second watch it is then.
I'm going to look so ~sexy~
[QUOTE=mysteryman;32419356]Guys, 18th birthday on friday, getting a watch still shopping around. Which one of these do you guys like the most?
-snip pics-
heart for watch 1
optimistic for watch 2
Tool for watch 3[/QUOTE]
[img]http://d1kn32quvsf7z3.cloudfront.net/images/C_billodes-ottoman-empire.png[/img]
I plan on buying one of those later, when i was at the store they had a few VERY nice looking pocket watches.
Been toying around with customizing my brain bucket all night. I think playing cards are cliche as fuck so nothing like that. FFF
Also pins are stupid too, tried that and it looked like a hipster helmet.
[t]http://fc09.deviantart.net/fs70/f/2011/264/1/c/husqvarna____73_goham_pattern_by_bigorca107-d4ak478.jpg[/t]
I must build this.
It will be hard, but I am confident in my abilities as an engineer.
This will be a major breakthrough in both the hammer industry, and the nail industry.
i just yawned and a fuckload of spit or something pirouetted out of my mouth and all over my keyboard
what the hell am i snake
it's called gleeking
the metamorphosis...
[b]IT BEGIIINS[/B]
[QUOTE=felix the cat;32421770][img]http://d1kn32quvsf7z3.cloudfront.net/images/C_billodes-ottoman-empire.png[/img][/QUOTE]
I have a pocket watch like that, it doesn't have the cover but I love looking at the really fine details on it.
[editline]22nd September 2011[/editline]
Also, hello
sup brah
Someone on 4chan drew me as a women.
[img]http://filesmelt.com/dl/38922_1363456094213_1465940962_30878300_5250116_n1.jpg[/img]
[img]http://filesmelt.com/dl/1316678568910.jpg[/img]
[editline]22nd September 2011[/editline]
Also would you guys hate me if I made a blog thread about my Japanese loadout?
[editline]22nd September 2011[/editline]
FFF someone made another one.
[img]http://filesmelt.com/dl/1316678859600.jpg[/img]
i like the girl you better
that looks like my friend's mom
They added fifty years to my age for some reason.
Also, comments on a thread about my JGSDF project?
[QUOTE=Kill001;32422668]that looks like my friend's mom[/QUOTE]
your friend's mom is hot
[QUOTE=CodeMonkey3;32422683]Also, comments on a thread about my JGSDF project?[/QUOTE]
well, dunno about making a thread because I want to make a ruskie loadout but I'm not making a thread about it; since japonees use a lot of us based gear, isn't it p much a usa specal furc loadout in jsdf camoe?
feenish that loadout quick and post it in lodeotu thread so winner ratings will be showered upon u
That's gold.
[QUOTE=Kill001;32422911]well, dunno about making a thread because I want to make a ruskie loadout but I'm not making a thread about it; since japonees use a lot of us based gear, isn't it p much a usa specal furc loadout in jsdf camoe?
feenish that loadout quick and post it in lodeotu thread so winner ratings will be showered upon u[/QUOTE]
The loadout will take months before it even starts to look remotely finished.
mine neither
i'm gonna get a replica body armor because appatantly it fits the load bearing vest better
aaaand there goes probably about 7 months of my wages
How much does it cost?
My Plate Carrier has cost about $300+ with that quote expected to rise with service fees and shipping.
holy shit that's a lot
I reason that it's like I'm buying a Pantac Plate Carrier or a smaller Eagle Industries vest. Plenty of people do that. Not to mention it's a very rare camo pattern in the States.
Basic pouch setup will cost about the same. I'll actually get an estimate on pouches to see what it is again.
[editline]22nd September 2011[/editline]
$241 for the price of products alone. I'd be ordering;
1x Double M4 Pouch
2x Single M4 Pouch
1x Admin Pouch
1x Double Mag Pouch
1x Roll-Up Dump Pouch
That's all. I'm kind of torn between getting the covered M4 pouches or open tops. I figure full tops will fill out the vest better in my opinion and the flaps can be removed or folded over. Haven't seen anyone run open-tops yet, which leans me to believe I shouldn't either.
I'm a bit worried though. I want to get a Battlebelt for my first line but I need to wear suspenders to keep it from falling off or sagging hardcore but I have a feeling you'll be able to see the shoulder portion of the suspenders under the vest shoulder pads which would look less OPERATOR than I want.
[editline]22nd September 2011[/editline]
Ah, never mind. I found the specific suspender set they want you to use with that belt. Only have them in multicam (otherwise known as plain tan?) but that's fine. Either you won't see it or I'll spray paint it.
[QUOTE=ossumsauce;32413829]GUYS GUYS LISTEN UP. Okay, you all had the idea to make an IFAP industries thing before, and make PKMs. Well an idea hit today after thinking about what i'm gonna model for the 3D printer project for intro to engineering. I model all the parts of a PMm, just thinner, so that i could metal plate the outside(possibly CNC it, we have a CNCing machine in class too) and we could sell PMm Body kits that you could drop GBB internals into. Then once we sell a few, we buy our own 3D printer, and make a bunch more. then we could move on to rifles an MGs. Everyone starts getting cuts(thats involved) and whats left goes to buying new materials and machines. We could have the guys that are good at modeling work on that, others that are better with machines, then those that are good with management/planning/business planning do that, with a decent pay, because since we would make rare guns they would'nt be cheap, and when we have enough money, we could buy some GBB kits/parts and make a true GBB that doesnt need internals. We would corner the market for PMms. Then, like i said, we move on. We make obscure Russian assault rifles/SMGs, like the 9A-91, etc. We would be filthy rich.[/QUOTE]
Pffff, the metal plate strategy would result in a terrible looking and performing product, whereas the CNC method would be expensive and incredibly complex (although preferable)
actually the CNC method might even be cheaper since you'd be using only one type of material and also the actual production would be simpler (though the planning and programming phase would be a nightmare)
also, GBB internals aren't like gearboxes, it would have to be made for a certain type that is the most common (maybe WA's 1911's) so the very small market would be incredibly inconsistent (like how many people would want to swap out stuff from their expensive WA, how many own one, etc.)
this is grade school level business planning
Yeah, GBB internals take a shitton of engineering to get right. You can't exactly just slap one together and have it work like you can with AEGs.
Also, there are no GBBs out that are roughly the same as the Makarov, so you don't even have a donor gun to get the mag and mechanism out of, meaning you have to make them from scratch.
There's a reason GBB companies have TEAMS of engineers working on guns. And why good ones, like TM and WA cost so damn much
which is also why planning even the body for a CNC machine (or machines, as you would have many positions and angles to cut and I doubt a school has a CNC with enough axis' avaliable to make it in one go) would take an insanely long amount of time, time during which you are not putting out a product and are essentially losing money
Not to mention the absolutely massive initial investment
[QUOTE=CodeMonkey3;32423195]How much does it cost?
My Plate Carrier has cost about $300+ with that quote expected to rise with service fees and shipping.[/QUOTE]
roughly $250-325 and the lbv being $130-165
Not to mention I still need an ak, boots, belt, and a ruskie shirt and patches...
[QUOTE=Kill001;32426214]roughly $250-325 and the lbv being $130-165
Not to mention I still need an ak, boots, belt, and a ruskie shirt and patches...[/QUOTE]
Are you looking at that Defender-2 and SMERSH rig?
I'd totally buy that setup, but apparently that seller on red-alliance is a bit sketchy.
And also I'm poor again atm since I don't have a job anymore.
nah, 6b13+6sh92
making a conscript loadout
Oh I see, didn't realize how expensive 6Sh92's were.
I still really badly want a Def-2 and SMERSH, fuck. Would look soo FSB with the summer partizan Gorka-E.
I need to get an account on red-alliance and see what they have.
Yeah but FSB/Vityaz/Spets gear is sssssssoooooooooo expensive
it's like their own version of UCP-D, I swear :v:
Sorry, you need to Log In to post a reply to this thread.