Your next airsoft purchase! V.2 - Jenkem aint sniping this one! - General

How do they work? Are they like just a branded BFG? I one got 17 kills with a single BFG thrown into a room, shame the rules are far more strict for using them now.

BFG? Big Fucking Gun?

[QUOTE=DarkZero135;33340044]BFG? Big Fucking Gun?[/QUOTE] Err blank firing grenade? Do you not have them in the US? It's a training grenade with full pin, retained spoon and a firing pin that hits blank cartridges held in the top? Fires 22, 9mm or 12 ga blanks. Cheap to use (Not to buy) and I've had a pair for 5 years with only minimal cleaning. [IMG]http://www.xsiteairsoftshop.co.uk/ekmps/shops/xsiteairsoftl/images/dynatec-blank-firing-grenade-212-p[ekm]365x300[ekm].jpg[/img] Are those thunder ones the same or CO2 type?

Thunder B's are C02

I'm probably going to buy a WE 1911 variant or perhaps the CZ75 of theirs next month, just for backyard plinking, I know it a pretty popular gun so does anyone here have any bad experiences with them? One review I read the guy said that his cracked at the slide when he dropped it so I'm hoping it's not some pot metal. And also, I can't find green gas on any sites. -nvm found some finally.

Its xxncxx btw I have $220 to spend on airsoft gear. Guy near me selling WE 1911 with 4 mags for 100, pretty much brand new, wondering if I should get, is it worth it? [editline]19th November 2011[/editline] [img]http://dl.dropbox.com/u/10323530/pt1.png[/img] [img]http://dl.dropbox.com/u/10323530/pt2.png[/img] along with a pistol [editline]19th November 2011[/editline] a quick reply would be nice

i have that duty belt, it's pretty good, i mount my dump pouch off of it along with my SERPA the pouches are a bit awkward to use though on it

I don't trust WE or 1911's. Although $100 is a good price.

[QUOTE=oakman26;33349868]get a real serpa noob!!! [editline]19th November 2011[/editline] or atleast a retention one [url]http://www.airsoftgi.com/product_info.php?cPath=28_456_458&products_id=8845[/url][/QUOTE] 76 dollars compared to like 46.

an RTI holster compared to a non RTI

[QUOTE=notrabies;33349951]I don't trust WE or 1911's. Although $100 is a good price.[/QUOTE] Nothing wrong with 1911s besides that they're overused and have a low gas capacity. but yeah, WE is p. bad generally

[QUOTE=oakman26;33351061]its 48 compared to 37[/QUOTE] your forgetting the holster mount. its 48 dollars for the holster only, which is more than 46 for a holster and a mount. [editline]20th November 2011[/editline] [QUOTE=felix the cat;33351408]Nothing wrong with 1911s besides that they're overused and have a low gas capacity. but yeah, WE is p. bad generally[/QUOTE] should i take the deal or not? [editline]20th November 2011[/editline] eh fuck it i'm getting a G&G GR16

I just bought a rail mount and a brown pistol grip for my AK, now I just need a PBS 4 :dance:

[QUOTE=oakman26;33358048]THe mount is 9.50 isnt it?[/QUOTE] 9.50 + 37 = $46 the RTI holster without a mount that was suggested is $48 ALONE. The mounts for RTI holsters are somewhere in the $20-40 range.

I just read that WE 1911 mags don't hold enough gas to fire a single mag worth of ammo, after owning a co2 GBB that held several 40 round mags worth of gas I simply can't live with that.

[QUOTE=nox;33364094]I just read that WE 1911 mags don't hold enough gas to fire a single mag worth of ammo, after owning a co2 GBB that held several 40 round mags worth of gas I simply can't live with that.[/QUOTE] Those are usually mags nobody lubes or takes care of, a properly lubed and maintained WE 1911 mag will do about 1 & 1/2 mags worth of ammo or more.

[QUOTE=nox;33364094]I just read that WE 1911 mags don't hold enough gas to fire a single mag worth of ammo, after owning a co2 GBB that held several 40 round mags worth of gas I simply can't live with that.[/QUOTE] That's a lie/that person really sucks are filling mags.

Still, I think I might ante up an extra 20$ and go for a KJW instead.

My KJW 1911 would not make it through a mag of ammo either. Honestly, disregard looks and get a hicapa, or get marui mags for your WE/KJW.

I've had problems running my mauri high capa mags through WE high capas. They fire but do not feed well or sometimes at all. Jammed quite a bit as well, no idea what was up since the mags were to my eye identical. No idea if 1911 mags are ok to mix.

[QUOTE=TheHypnotoad;33368599]I've had problems running my mauri high capa mags through WE high capas. They fire but do not feed well or sometimes at all. Jammed quite a bit as well, no idea what was up since the mags were to my eye identical. No idea if 1911 mags are ok to mix.[/QUOTE] If you're having feed issues and jams, you most likely need to apply some lube to the magazine follower, spring, and the area where the bbs rest. The issue is that 1911 mags are so thin, they hold practically no gas at all. Since Marui makes nice things, their valves and such will be better manufactured and let the mag be more efficient. The real issue is that metal slides and heavy recoil springs take more gas, so a metal 1911 will still have some issues. The best thing I can recommend is to either get the goofy looking marui extended 1911 mags, which should in theory have a better gas:bb ratio so you get more rounds and the gas to get them all through, or to get a plastic slide 1911. Before my KJW 1911 mags got messed up, I expected 10-12 shots per mag in the summer and 3-4 in the winter. I'd also recommend KWA's NS2 system for gas efficiency, but we've been over KWA 1911's before.

[QUOTE=notrabies;33368643]If you're having feed issues and jams, you most likely need to apply some lube to the magazine follower, spring, and the area where the bbs rest. The issue is that 1911 mags are so thin, they hold practically no gas at all. Since Marui makes nice things, their valves and such will be better manufactured and let the mag be more efficient. The real issue is that metal slides and heavy recoil springs take more gas, so a metal 1911 will still have some issues. The best thing I can recommend is to either get the goofy looking marui extended 1911 mags, which should in theory have a better gas:bb ratio so you get more rounds and the gas to get them all through, or to get a plastic slide 1911. Before my KJW 1911 mags got messed up, I expected 10-12 shots per mag in the summer and 3-4 in the winter. I'd also recommend KWA's NS2 system for gas efficiency, but we've been over KWA 1911's before.[/QUOTE] I take care of my mags, so I'm pretty sure it was a mechanical issue - They just refused to strip the BB from the top of the mag - not sure if the lips are stronger or mauri compared to WE or whatever. Wasn't inokatsu making a 1911? Did that ever get off the ground because I havn't seen one for sale. Also, does anybody know if the mauri mp5k has the back stock guide tabs fake welded shut or weather it will accept a retractable?

[QUOTE=TheHypnotoad;33368699]I take care of my mags, so I'm pretty sure it was a mechanical issue - They just refused to strip the BB from the top of the mag - not sure if the lips are stronger or mauri compared to WE or whatever. Wasn't inokatsu making a 1911? Did that ever get off the ground because I havn't seen one for sale. Also, does anybody know if the mauri mp5k has the back stock guide tabs fake welded shut or weather it will accept a retractable?[/QUOTE] Okay, that would make sense, because the KJW mag lips are essentially Jello, and I imagine WE are pretty similar. Marui brand jello would be plastic, impossible to break, and still be delicious, if not overpriced. Inokatsu's 1911 is almost done, but expect it to cost upwards of $500. It should certainly be out by the end of the year, because its the 100th anniversary. I'm almost positive marui MP5Ks have those tabs stuck on there, my Galaxy MP5K does, and its a direct clone. So it turns out that the Inokatsus that have been sold so far were $1000.

Alright, i got my next purchase mapped out. Mostly. I've pretty much got Project ASHAD mapped out as well. I just need help picking out WHICH tri-shot shot gun to use. No stock, no longer than about 1-2 feet. Good quality, i don't want to have to take the whole gun apart just to get to the thing to do maintenance. After that it's more shells for it, like enough to last a major game, just in case, BBs, green gas, 1911 mags, and most likely some M16 mags. If for whatever reason i have MONEY after that, i was thinking of saving it up for a KWA MP7.

the short stockless de/bravo/cyma/tsd/utg/china trishot?

[QUOTE=the_killer24;33374870]the short stockless de/bravo/cyma/tsd/utg/china trishot?[/QUOTE] Jesus dick that's a lot of brands. I dunno, GI always seems sold out on those, i might buy from evike if i have to. [editline]21st November 2011[/editline] nvm, GI has them in stock. [editline]21st November 2011[/editline] So, which one of these? [url]http://www.airsoftgi.com/product_info.php?cPath=139_181&products_id=8315[/url] [url]http://www.airsoftgi.com/product_info.php?cPath=139_181&products_id=5902[/url] [url]http://www.airsoftgi.com/product_info.php?cPath=139_181&products_id=3132[/url]

they're all the same thing i would just go for the cheapest one

Bought 2 Emags, systema type 0 cylinder, and guarder Sp100 spring for my CM M16A4 for yesterdays game. Was shooting 250fps before, up to 350fps again so I was happy. Good thing I bought the Emags too, my G&G hicap fed like shit.

[QUOTE=FPKawaii;33364138]That's a lie/that person really sucks are filling mags.[/QUOTE] Not necessarily, this kind of thing is rather climate dependent.

Planning on picking up some cheap CYMA AK102's for me and taiwanese prick this weekend.