Your next airsoft purchase! V.2 - Jenkem aint sniping this one!
4,116 replies, posted
[QUOTE=Biscuit-Boy;31464426]After posting in wrong thread already.
I ordered boneyard, got two HFC USP GBBs and 2 LPEG Ak47s for ~$20. Pics upon arrival because I know you're all on the edge of your seats because this is some riveting shit here.[/QUOTE]
What are you buying them for?
[QUOTE=Psycoace2;31464450]What are you buying them for?[/QUOTE]
Props, and I miss having a USP, not to mention they were so damn cheap at the very least they make a better meat pulverizer for the same price as a real one.
I gotta get a:
AKS-74U flash hider, black.
M4 style flash hider, black.
14mm Die
Rifle Bag
I've been putting off taking off the orange caps for a long time and now that I have I've got to get a bag because transporting them by just leaving them on the floor of my truck isn't going to fly anymore. I also need to rethread my Tavor because dicks.
[editline]2nd August 2011[/editline]
14mm die right?
[url]http://cgi.ebay.com/Hanson-Carbon-Steel-Hex-1-7-16-Across-Flat-Die-14mm-/360382322684?pt=LH_DefaultDomain_0&hash=item53e875d7fc[/url]
I'm helpless with this shit.
[QUOTE=CodeMonkey3;31497194]
14mm die right?
[url]http://cgi.ebay.com/Hanson-Carbon-Steel-Hex-1-7-16-Across-Flat-Die-14mm-/360382322684?pt=LH_DefaultDomain_0&hash=item53e875d7fc[/url]
I'm helpless with this shit.[/QUOTE]
Not that one. What you need to look for is a CCW 14mmx1mm Die
(First # is diameter, 2nd number is thread pitch). I have a link to one bookmarked on my other computer, I'll link you to it later. You're also going to need a die wrench to hold it, and those don't come cheap for a die that size. Think the cheapest I found was $50, so I just machined my own.
Do you need to cut threads from scratch, or are there threads already that just need to be cleaned up?
If you just need to clean it up then you can probably go without the wrench and spin it by hand.
The threads near the top, at least three or four are essentially gone or FUBAR. The rest needs to be cleaned up.
I've got a wrench, I had an extensive tap and die set but I don't have anything metric. The Hex screws are the same way, no metric. I lost what I had when the holder broke and they went everywhere.
I think I need it clockwise, according to ehobbyasia it's clockwise and I -think- it was clockwise when I did it so could you link me to both? I'm going to try check when I get home, at work now.
Bought one of the 2011 edition (IE: not terrible hopup and not ridiculous FPS) KWC CO2 mini UZIs and a King arms M79
Should be here in time for the HVA game :buddy:
you are a true terrorist/gang member/cool guy
I want to buy a grenade launcher purely so I can write shit on it. Like "Thus I Refute Thee" and "FUCK DA POLICE"
Just bought another battery for my AK's.
[QUOTE=Inafinus :3;31515571]you are a true terrorist/gang member/cool guy[/QUOTe]
I was about to break down and buy one of the new KWA TMPs and was thinking to myself "Damn, Im about to buy my first tacticool gun" then I remembered those Mini Uzis and instantly bought one to prevent any second thoughts :v:
Plus the Uzi is so much cooler since it sounds UNBELIEVABLY angry in comparison to other gas SMGs.
I have a lot to buy/fix. My SCAR i ordered and my friends clocks too high a FPS to use at HVA without having a engagement distance. So, i need to take them to ACQB and have it lowered, and hopefully be done before the game. I also need to get two pistol belts with ammo pouches, and possibly a tan jacket to finish my friends Stalker loadout.
2 pistol belts?
In other news, for my next gun I kinda want to build myself a DMR from the ground up.
Ideas anyone?
[QUOTE=ossumsauce;31519313]I have a lot to buy/fix. My SCAR i ordered and my friends clocks too high a FPS to use at HVA without having a engagement distance. So, i need to take them to ACQB and have it lowered, and hopefully be done before the game. I also need to get two pistol belts with ammo pouches, and possibly a tan jacket to finish my friends Stalker loadout.[/QUOTE]
ASGI says it's 11.1 lipo ready, is that true? It might be my next purchase, along with a smart charger.
I wouldn't recommend using a lipo in a Dboys
[QUOTE=felix the cat;31519380]2 pistol belts?
In other news, for my next gun I kinda want to build myself a DMR from the ground up.
Ideas anyone?[/QUOTE]
one for me, one for my friend.
[editline]3rd August 2011[/editline]
[QUOTE=Psycoace2;31519413]ASGI says it's 11.1 lipo ready, is that true? It might be my next purchase, along with a smart charger.[/QUOTE] i dunno, never used lipo.
Buy cyma M14
Go wild~
[editline]3rd August 2011[/editline]
A lipo is fine as long as you're not emptying entire mags with one burst.
OR, FELIX, WE CAN BUILD OUR LMG
LETS DO IT NOW
Bought my Clockwise, Black, M4 flash hider. Ebay. Done.
Now I just need my AK mags, next week probably and a gun bag. I'll ask my grandfather if he has some to spare.
Yay i got a carrying handle for my m4a1 instead of the flip up sight
This makes me sad, someone at the local field is selling a G3 and a M14 for $85 each that both include a battery and atleast 2 mags. I've always wanted to get a G3 and now one just happens to come up cheap right after I just lost my job...
[QUOTE=cornflakes;31532432]This makes me sad, someone at the local field is selling a G3 and a M14 for $85 each that both include a battery and atleast 2 mags. I've always wanted to get a G3 and now one just happens to come up cheap right after I just lost my job...[/QUOTE]
I hope you find employment soon my bro, I know the feeling.
On Biscuit's hit list:
[img]http://www.airsoftglobal.com/shop/images/KSC-USP.45-FS-AG.JPG[/img]
Ordering used soon, NS1 because that's how I like my Taiwanese girls.
Gettin' dis guy for my WA soon
[img]http://filesmelt.com/dl/sd-gsms227b_big.jpg[/img]
[QUOTE=felix the cat;31539221]Gettin' dis guy for my WA soon
[img]http://www.uncompany.com/images/sd-gsms227b_big.jpg[/img][/QUOTE]
You should rehost that, uncompany is slooow.
