Your next airsoft purchase! V.2 - Jenkem aint sniping this one! - General

Order #1 has arrived at my Japan-Man. [t]https://sn2files.storage.live.com/y1mT6f65w9v5djzidNqWNdJWR3PJ5dkcRssS-7uDBdKHTBY6gCP8oj--SYWNameoX2bggzXtJFaEIMQtQ0q38XXAcSezmDdksqa3bZpO-21BudRiZAW1MN8EbFahEhgSFLvdoezufkPAN4/083.JPG?psid=1[/t]

How the hell did you meet this japan guy or whatever?

I had to summon him with my Oriental Flute, but I can only use it three times so I have to be careful.

[QUOTE=CodeMonkey3;32314301]I had to summon him with my Oriental Flute, but I can only use it three times so I have to be careful.[/QUOTE] It was kill i knew it.

I am getting tired of running the same old assault rifle set-up so I am goin going to mix it up. I am constructing a flame thrower at the moment. Everything is planned out: 6.10mm inner barrel,machined vortex cube, and the overall design but I have one problem. I can't find a good enough air source. I was going to run 2 self containment breathing apparatuses rated at 3000 PSI each but they are expired and that can be "dangerous" according to the seller. Any body have an idea for what I should do for the air source such as what air tank at what size. I will bring a portable air compressor to all of my games so I can fill it up after games.

ask timebomb he already made one

I am pretty sure that his was Co2 regulated. I am going for compressed air. But I will ask him any ways

I just bought a new Glock and Wessen 23mm Special from Facepuke.

[QUOTE=CodeMonkey3;32325612]I just bought a new Glock and Wessen 23mm Special from Facepuke.[/QUOTE] Good for you oh and why do you hate me?

Who are you? [editline]16th September 2011[/editline] [media]http://www.youtube.com/watch?v=sYdKK9KQQe0[/media]

[QUOTE=CodeMonkey3;32326306]Who are you? [editline]16th September 2011[/editline] [media]http://www.youtube.com/watch?v=sYdKK9KQQe0[/media][/QUOTE] I was at the Combat Engagement Course at HVA. and you hate me. you ignored my friend request on facebook HOW COULD YOU!?!?!?!

I don't do well with names. I have no idea who the people are who send me friend requests in Facebook. There were like, ten people in the Combat Engagement Course and I don't remember any of them, that's a really weak hint.

[QUOTE=CodeMonkey3;32326867]I don't do well with names. I have no idea who the people are who send me friend requests in Facebook. There were like, ten people in the Combat Engagement Course and I don't remember any of them, that's a really weak hint.[/QUOTE] I know, I just am messing with you about the whole Facebook thing. I was the kid who had the foggy goggles and that other kid was like hey I am going to get my anti fog spray and then you went to go get your ARES TAR-21 and I went also to see the gun [editline]16th September 2011[/editline] I was also at Merida 2 with that gigantic tent and packaged flour with the goat on them

[QUOTE=stabbytheghost;32326952]I know, I just am messing with you about the whole Facebook thing. I was the kid who had the foggy goggles and that other kid was like hey I am going to get my anti fog spray and then you went to go get your ARES TAR-21 and I went also to see the gun [editline]16th September 2011[/editline] I was also at Merida 2 with that gigantic tent and packaged flour with the goat on them[/QUOTE] I remember you..............

I love how when we got the flour out, we all covered our faces in flour. My ALICE gear is still a little caked with flour, and that shirt I wore was covered the day after :v: I think I was the most cocained up out of all of us lol

[QUOTE=deathmog;32330752]I love how when we got the flour out, we all covered our faces in flour. My ALICE gear is still a little caked with flour, and that shirt I wore was covered the day after :v: I think I was the most cocained up out of all of us lol[/QUOTE] I stayed off durgs. Because i'm a tosser faget.

I am not sure if you guys saw it but i walked over to the DEA group slammed the coke on the table,cut it open, and shoved my face in it.

So imma buy 10 E-Mags because I need mags that don't suck.

[QUOTE=FPKawaii;32346456]So imma buy 10 E-Mags because I need mags that don't suck.[/QUOTE] I herd the're good-to-go.

[QUOTE=ossumsauce;32346699]I herd the're good-to-go.[/QUOTE] Ive used them, their good-to-go.

[QUOTE=FPKawaii;32346710]Ive used them, their good-to-go.[/QUOTE] Thats good-to-know.

Bought a Surefire Helmet Light Clip so I can put it on MOLLE or hats and such.

I'll probably gonna buy shit for my Jeep. Lift kit, bigger tires, and some engine upgrades as soon I get another job up at Bear Creek.

[QUOTE=stabbytheghost;32337572]I am not sure if you guys saw it but i walked over to the DEA group slammed the coke on the table,cut it open, and shoved my face in it.[/QUOTE] bahahaha I completely forgot about that

Sometime in the next month: [url]http://www.redwolfairsoft.com/redwolf/airsoft/ProductDetail?prodID=31614[/url] with the upgrade. [url]http://www.redwolfairsoft.com/redwolf/airsoft/ProductDetail?prodID=18060[/url] [url]http://www.redwolfairsoft.com/redwolf/airsoft/ProductDetail?prodID=17897[/url] I plan on throwing a laser and possibly an optic on there as well. Too tacticool or is it acceptable?

instead of getting railez, get a heatshield for style points :dance:

[QUOTE=Kill001;32362214]instead of getting railez, get a heatshield for style points :dance:[/QUOTE] I am certainly in the minority, but I'm not a fan of heatshields. I may look around for kicks, but I know putting a real steel heatshield on a maruzen can require quite a bit of work.

JGSDF Plate Carrier here I come.

[QUOTE=CodeMonkey3;32362318]JGSDF Plate Carrier here I come.[/QUOTE] Is there any chance I can hop on one of your Japan Man orders at some point? Maruzen parts are very rare outside of Japan.

I'd say yes, but he doesn't know shit about Airsoft. Basically, I find sites in Japan that sell the gear I want. Link him to each product and tell him how many I want, ask for a total and he orders them, I pay him etc. If you can't find the parts on a Japanese website to link me too it wouldn't help either way. He wouldn't know anything about Airsoft.