Your next airsoft purchase! V.2 - Jenkem aint sniping this one! - General

Well I was disassembling it a few years ago to see if I had the skills needed to install another inner barrel, and the gearbox and other bits wouldn't quite all fit together in the receiver. On the CA the trigger mechanism and trigger guard are responsible for locking it all in place, and despite numerous tutorials, I couldn't solve the issue. Then I moved from my old house and the trigger component disappeared. They're pretty tough to find and I don't have much use for it anymore. If someone wanted it I'd probably let it and the 2 hicaps I have for it go for like $75+shipping.

I need to buy a motor and a flashhider for my M4, maybe some Moscart shells too. Going to see if i can pick up a flash hider from the airsoft arms fair in like two weeks, since there's huge trays of parts for sale there with shit for dirt cheap, so i just need to find a clockwise thread one in there. Going to see what other cool shit i can pick up. Motor might be a little more expensive but i'm probably going to wait for the arms fair for that too, since there might be some in amongst the parts. And i just bought some of these: [img]http://t1.gstatic.com/images?q=tbn:ANd9GcSDHHFwFCfvzZn_aG1eFir_1RTAqJQKIR6Q2WabQ5USvdSHnWtaKZ-cga-dXg[/img] But i realize i forgot to check if they're ballistic rated. Bought them from here: [url]http://www.ebay.co.uk/itm/US-MILITARY-GOGGLES-SUN-WIND-DUST-NEW-/350486046444#vi-content[/url] So i think they're legit real ones and not cheapass knockoffs, are they meant to be ballistic rated?

I use mine without a problem.

You can get ballistic outserts, right?

The dark tinted lens should say "ballistic lens" on the near the top edge.

I hope it does, even if none of the other lenses have ballistic ratings. If i get those i can use the dark lens and buy a balaclava and a spas 12 and be a hl1 shotgun soldier guy. that is my ultimate goal in life.

Goodluck finding the aftermarket ANSI rated ones. The ones that come stock are fine.

[QUOTE=Stupideye;32509969]That doesn't make much sense to me seeing as KA and G&G both have different... everything compared to the TM and CYMA M14's.[/QUOTE] No it's CA, not KA.

My friend wants a CYMA M14, tell me what midcaps to referr him to then, i'm confused by your guys' tomfoolery, he picked out KA mags. No-go?

fuck KA, go MAG or TM

[QUOTE=deathmog;32515755]My friend wants a CYMA M14, tell me what midcaps to referr him to then, i'm confused by your guys' tomfoolery, he picked out KA mags. No-go?[/QUOTE] I've had matrix m14 mags be fine for over a year, go matrix on that one.

So I got one of those Wingun revolvers (this one specifically: [url]http://www.shortyusa.com/cart/images/1637.jpg[/url] ) Im thinking about getting it powdercoated and then getting the SCP foundation logo laser etched into it. [img]http://images.wikia.com/portaldaemons/images/5/55/SCP-Banner2.png[/img] Even though Im not in the community or anything I think the logo is cool looking and I know at least a few guys I play with would get the reference. Thoughts?

[QUOTE=093]███-███ is a revolver style weapon with two 12 bullet cylinders. The design of the gun has one cylinder on each side, raised slightly, so they may flip into the gun itself and then rotate, firing all rounds, before flipping back out and allowing it to be reloaded while the second is usable allowing a total of 24 shots before it runs empty. There is no firing pin on this gun, but instead there is a pull-back slide mechanism that must be used to prime the active cylinder. At the time of recovering, all 24 slots contained a syringe style bullet with 32 needles on the end. On impact it is assumed the force of the shot will press the liquid inside into the target. None have been tested. Of express interest is that these cylinders can hold standard .45 caliber ammunition which has been tested. The gun uses an ultra high power magnetic rail system to deliver the shot so the gunpowder in the bullet is never used. In consideration is a redesign of a round that would utilize the gunpowder midflight to add even higher velocity to the round or that would explode on impact for higher yield.[/QUOTE]

[QUOTE=the_killer24;32531831][/QUOTE] So it fires the brass too? Weird that because no powder in bullet, just in case, therefore it fires the case!

Fires 35% more bullet, per bullet!

I'm bored, let's have an SCP-914 gun discussion [quote][b]Name:[/b] ████001 [b]Date:[/b] 09/2█/201█ [b]Total Items:[/b] Five (5) Izmash AKM, safe position, unloaded, no magazine [b]Input:[/b] One (1) Izmash AKM [b]Subject:[/b] ████001 [b]Setting:[/b] Rough [b]Output:[/b] Block of metals and wood equal to the mass of the AKM [b]Input:[/b] One (1) Izmash AKM [b]Subject:[/b] ████001 [b]Setting:[/b] Coarse [b]Output:[/b] One rail[EXPLETIVE]ed AKM complete with Magpul furniture, interestingly the selector switch is on the full-auto position [b]Input:[/b] One (1) Izmash AKM [b]Subject:[/b] ████001 [b]Setting:[/b] 1:1 [b]Output:[/b] One AK47 [b]Input:[/b] One (1) Izmash AKM [b]Subject:[/b] ████001 [b]Setting:[/b] Fine [b]Output:[/b] One OC-██ G████ assembled with a grenade launcher, silencer, and optic [b]Input:[/b] One (1) Izmash AKM [b]Subject:[/b] ████001 [b]Setting:[/b] Very Fine [b]Output:[/b] AKM albeit with minor wear but with the most beautiful wood furniture anyone in the facility has ever seen. An 1P29 optic was also mounted on it upon retrieval. Noted by users of ████punch it looks like ██████'s AK██[/quote] :v:

Does anyone know where I can get a good gold plated M1911? Me and a friend and his uncle want to buy one and engrave it then modify the grip so it looks like this [img]http://guides.gamepressure.com/dukenukemforever/gfx/word/-2069079234.jpg[/img]

[QUOTE=VenomousBeetle;32536977]Does anyone know where I can get a good gold plated M1911? Me and a friend and his uncle want to buy one and engrave it then modify the grip so it looks like this [img]http://guides.gamepressure.com/dukenukemforever/gfx/word/-2069079234.jpg[/img][/QUOTE] [url]http://socomgear.com/english/index.php?main_page=product_info&cPath=7&products_id=48[/url] ???

[url]http://www.airsoftpost.com/product_info.php?cPath=21_45_252&products_id=25024[/url] The WE version is cheaper and the same thing besides trades

[QUOTE=cpt.armadillo;32537057][url]http://socomgear.com/english/index.php?main_page=product_info&cPath=7&products_id=48[/url] ???[/QUOTE] yeah like that

[url]http://www.airsoftpost.com/product_info.php?products_id=32759[/url] and the WE tech extended slide lock for my TM hicapa

[img]http://dl.dropbox.com/u/10323530/0bb5d75443fb97172f47fb3b83485358.png[/img] [editline]30th September 2011[/editline] the eotech is just a placeholder while i search around for some good sights to use on a G36. EDIT: changed the picture, is this good?

why evike?

[QUOTE=iFail;32552621]why evike?[/QUOTE] cheaper

even with the discount codes? evike's blatant rebranding always strikes me as shady as fuck. [editline]30th September 2011[/editline] also your avatar whaaaaaaaaat

i just now realized i had all matrix products in there. well if you can find me an equivalent to that for cheaper or around then i'll go with that instead. also, what about my avatar?

Evike is fine. I think it's stupid how EVERYTHING is fucking "MATRIX BRAND MATRIX MATRIX-CO2 CONVERSION FOR MATRIX M-X MATRIX C02 PISTOL WITH LICENSED MATRIX TRADEMARKS" Fucking hell. I think my Type 89 was "Matrix" to them. It's made by two companies, BE/JG and Tokyo Marui. And it was "Matrix" brand only in title. They're no different than any other guns you buy.

[QUOTE=xxncxx;32553336]also, what about my avatar?[/QUOTE] what that face

[QUOTE=iFail;32553655]what that face[/QUOTE] what about it though? are you asking who it is or what its from?

Honestly an Eotech was better than that red dot, just get that G&P version.