I haven't shot many wheel guns, but some of them were pretty cool:
- Desert Eagle .44 Magnum
- Ruger .44 Revolver of some sort (looked very similar to an SAA)
- H&K USP .40
- My 870 Express
- A .22 Luger
- Thompson M1928A1 w/ drum mag
- and a McMillan TAC-50
Closest thing I have to a real gun is a .177 40/50 year-old air rifle. It's legally classed as a firearm over here, too.
Out of real guns I've shot on the range:
Rifles n shit
AKM
SL-8
.22lr M4
Sporterized Mauser
Mosin Nagant
SVD
DP
Shotguns
Mossberg Maverick
IŻ-27
SMG's
PPSh
PM-84P Glauberyt
PM-63 Rak
Pistols n shit
Glock 17
USP Expert (9mm)
MAG 98
Taurus .44 revolver (It wasn't a piece of shit)
Also, I'm seriously considering getting a black powder revolver of some sort, because pre-1885 black powder weapons (and replicas of such) require no permit in Poland. I can have one shipped to me via mail.
My friend is letting me borrow this for Saturday's outing
[IMG]http://i.gyazo.com/7e1212451192c55c0fd7e843afc70c75.png[/IMG]
that cat is going to wreck bitches at the game dude. nice choice.
Fuck that gun I want those sheets.
M90: rainbow edition
I was just thinking it looked like rainbow m90...
Great minds think alike.
Even if they're thinking stupid shit.
That's my parents' bed, they've had that comforter since the late 90s :v:
it definitely looks 90's as fuck haha
For all you people who are really into modding your guns internally, I have this perfectly fine CA sportline.
I only feel that I need to upgrade it so it can perform as good as my really good guns. I have a basic knowledge on how an airsoft gnu works but I am new to what kind of part brands are good.
Right now, I have a shitty motor and a ok hop up.
What kind of parts should I get for the following:
Hop up (from what I hear the G&G green bucking is good, my G&G top tech gets godly range stock.)
Motor
I want to rear wire
Barrel, If that improves accuracy significantly. (I can sorta hit 200 feet but very inaccuately)
Lipos and what ever you need to run them (MOSFET and charger?)
Anything that can keep my gearbox from stripping it's self.
Also how shitty is green label E mags. I cant afford 12 PTS mags.
Any single piece, metal hop up unit will be a decent upgrade. Prowin is the best. G&G green buckings are wonderful, and pair nicely with the Madbull Black Python barrel. Lonex A2's are generally considered to be great motors, but you could also get a JG blue for much cheaper. Wiring is as simple as wiring if you know how to solder, or buying a wiring harness if you don't. Guarder sells harnesses. Purchase lipo's from hobbyking, and buy a decent smart charger and power supply, unless the power supply is integrated.
[QUOTE=Herfjotur;44734297]Any single piece, metal hop up unit will be a decent upgrade. Prowin is the best. G&G green buckings are wonderful, and pair nicely with the Madbull Black Python barrel. Lonex A2's are generally considered to be great motors, but you could also get a JG blue for much cheaper. Wiring is as simple as wiring if you know how to solder, or buying a wiring harness if you don't. Guarder sells harnesses. Purchase lipo's from hobbyking, and buy a decent smart charger and power supply, unless the power supply is integrated.[/QUOTE]
I will always recommend the thunder ac6 charger
[url]http://www.hobbypartz.com/thac6smbachw.html[/url]
G&G hopups and G&G greens are good, so are Lonex buckings and hopups. I've found though that its better to pair same brand hopups and buckings, because I had poorer ranges with the G&G green in the Lonex Hopup and vice versa.
For a motor, a JG Blue is very good (has the blue plastic base) or a Lonex Titan.
Rear wiring is easy. since you have a front wired gun, you MIGHT have enough wiring to work with to reroute the wires to the rear. If not, just buy a rear wire set and keep and eye out for wires that say they're low resistance. Someone else may have better advice on this. I've rewired my Combat Machine a few times, but I didnt really look for anything specific as far as wiring goes.
For barrels, I've found that Madbull Pythons work well. Generally most people go with 6.03, but as long as you keep your barrel clean, you shouldnt have to worry about a jam with a 6.01. I have a 6.01 in my LM4 and it hasnt jammed yet, and gbb's are messier than AEGs.
Lipos, I would suggest a 7.4v. With a 11.1v and if you get a strong motor like a Lonex titan, it can lead to issues with your nozzle not functioning properly and making you gun fire sporatically or even not at all. I had this issue with my FAL when I had it and it was really annoying. The trigger response was nice though. I have no experience with mosfets and I've heard they could fix the above issue, but I dont have any first hand experience so I wont comment. Pretty sure this is a good charger too
[url]http://www.hobbyking.com/hobbyking/store/__7028__Turnigy_Accucel_6_50W_6A_Balancer_Charger_w_Accessories.html[/url]
As far as keeping your gearbox from stripping, get a full steel toothed piston. The very first issue I had with my first airsoft gun was a stripped piston, and I bought a full steel toothed one and havent had any issues in the following ~2.5 years.
Just my 2 cents, I'm sure other people have stuff to add or comment on
I'm thinking of selling my upgraded M4 and investing in the scar.
What do you think this is worth?
CYMA M4CQBR body w/trademarks,
MOE grip
4 elite force midcaps
4 PTS Pmags(legit 120rd)
Madbull 300mm 6.03 tightbore
G&G green bucking
RTQ hop up unit
China 552 sight
FMA peq 15
G&P drop in gearbox
JG Blue
Rear mbus
Dboys m203
3 mag 120rd POM 40mm grenades
11.1v and 7.4v 2000mah crane lipos
This is one of the reasons I've been wanting to know how to fuck over UPS for a box.
[QUOTE=Wulfram;44734408]G&G hopups and G&G greens are good, so are Lonex buckings and hopups. I've found though that its better to pair same brand hopups and buckings, because I had poorer ranges with the G&G green in the Lonex Hopup and vice versa.
For a motor, a JG Blue is very good (has the blue plastic base) or a Lonex Titan.
Rear wiring is easy. since you have a front wired gun, you MIGHT have enough wiring to work with to reroute the wires to the rear. If not, just buy a rear wire set and keep and eye out for wires that say they're low resistance. Someone else may have better advice on this. I've rewired my Combat Machine a few times, but I didnt really look for anything specific as far as wiring goes.
For barrels, I've found that Madbull Pythons work well. Generally most people go with 6.03, but as long as you keep your barrel clean, you shouldnt have to worry about a jam with a 6.01. I have a 6.01 in my LM4 and it hasnt jammed yet, and gbb's are messier than AEGs.
Lipos, I would suggest a 7.4v. With a 11.1v and if you get a strong motor like a Lonex titan, it can lead to issues with your nozzle not functioning properly and making you gun fire sporatically or even not at all. I had this issue with my FAL when I had it and it was really annoying. The trigger response was nice though. I have no experience with mosfets and I've heard they could fix the above issue, but I dont have any first hand experience so I wont comment. Pretty sure this is a good charger too
[url]http://www.hobbyking.com/hobbyking/store/__7028__Turnigy_Accucel_6_50W_6A_Balancer_Charger_w_Accessories.html[/url]
As far as keeping your gearbox from stripping, get a full steel toothed piston. The very first issue I had with my first airsoft gun was a stripped piston, and I bought a full steel toothed one and havent had any issues in the following ~2.5 years.
Just my 2 cents, I'm sure other people have stuff to add or comment on[/QUOTE]
that charger does not include the power supply
Yeah, I forgot to add the power supply.
So I got this beauty (Marushin Five seveN CO2) for around 90 USD.
[IMG]http://i61.tinypic.com/6qjxx5.jpg[/IMG]
Not sure how many BB's the previous owner put through it, but it still has 3 months of warranty left.
Bros
[IMG]http://i.imgur.com/0jRt1SLl.jpg[/IMG]
How does this little gun fair?
Because I saw the price, the fact that it was a 5-7 and CO2 powered... and I just had to have it. I kinda regret not reading about it on the interwebs BEFORE I spend money. Oh well.
Ever since my family got a real Five-seveN I just want an airsoft one.
I have a dilemma here. As much as I love how unique the stock on the HK416c is, it just doesn't provide the length of pull or cheek weld I need for a comfortable shooting stance. The natural response was to install a buffer tube, but I fear that I am somehow defiling my gun and wanted to know what you guys thought.
[IMG]http://i.imgur.com/sVfFpUJl.jpg[/IMG]
Also, long vs short barrel?
KAC vs TD grip?
[QUOTE=Arctic Aveng;44735443]How does this little gun fair?[/QUOTE]
tbh it's not that little.
[QUOTE=apoctank;44739016]I have a dilemma here. As much as I love how unique the stock on the HK416c is, it just doesn't provide the length of pull or cheek weld I need for a comfortable shooting stance. The natural response was to install a buffer tube, but I fear that I am somehow defiling my gun and wanted to know what you guys thought.
[IMG]http://i.imgur.com/sVfFpUJl.jpg[/IMG]
Also, long vs short barrel?
KAC vs TD grip?[/QUOTE]
I'd say if youre going to run the buffer tube, use the long barrel. But thats just me. As far as grips, I like KAC ones purely because I go back and forth between using it as a a point of reference and actually "broomhandling" it, but thats a personal preference kind of thing. I think the TD grip looks better if youre going to stick with the shorter barrel though
[QUOTE=apoctank;44739016]
[IMG]http://i.imgur.com/sVfFpUJl.jpg[/IMG][/QUOTE]
reminds me of the noveske diplomat for some reason
[IMG]http://www.imfdb.org/images/thumb/a/af/NovDiplomatM68.jpg/400px-NovDiplomatM68.jpg[/IMG]
Apoc, that's some awful lighting. Anyways to me, you should never use a long barrel on a 416 because it makes the gun look way more 'plain jane infantry of some other country like poland or something', I dunno.
Wasn't meant to be a pretty picture, just showing the different shit I put on there
SBRs are really cute to me I dunno why
That's totally not the point. It doesn't have to be pretty lol, the thing is that all I can see is a black silhouette with tan accessories attached. Aka I can't see shit. Like, it's a cool gun, it's just an awful picture.
[img]http://i.imgur.com/sVfFpUJl.jpg[/img][img]http://puu.sh/8Dg6a.jpg[/img]
Sorry, you need to Log In to post a reply to this thread.
