[img]http://i.imgur.com/kll90F7l.jpg[/img]
got it today
the sound of cocking the gun was the pure reason i bought it
so worth it
Now buy a primary and some gear and go to a field.
yeah nah, i'm not an outdoor person, and nobody plays here in town anyways
[QUOTE=BBOOBBYY!;45949736]I've realized that I haven't taken a proper picture of my AK with a flashlight on it.
Then I realized that I haven't done that because I can't find my flashlight mount.
So I just took my scope rings and woot.
[t]http://i.imgur.com/ERGlsXX.jpg[/t][/QUOTE]
What can is that? Thought it was a TGP-A at first.
iirc it actually is, from some polish garage shop
That's not a TGP-A, I have one.
This is the TGP-A.
[t]http://rus.mil.pl/forum/uploads/tlumiki/__TGP-A-545_01.jpg[/t]
Apparently the one he's got is called a TGP-1 and is normally found on AK-9's, which fires 9x39mm, not 5.45x39mm.
[IMG]http://i.imgur.com/7Bag6Pg.jpg[/IMG]
[IMG]http://i.imgur.com/RcHwkFW.jpg[/IMG]
PKM on a duce and a half for a kinda-unorganized op which was still fun.
Unfortunately my camera stopped recording, but after this we came in contact with an enemy "tank/apc" and we all jumped out the back and fired blank guns at each other, spread out and had some bbwar funs.
Theres a strap on the box mag because earlier in the day I pick it up and the whole thing just flips open dropping 2000+ 0.28g bbs. Then had to walk a mile or so to re-arm.
Also electrical tape on right side to keep from bbs from falling out. Was a temporary fix since the dummy rounds keep that flap open exposing the bbs.
Heavy to carry around, but oh so effective in midcap games.
protip: bend the tab on the box mag
[t]http://i.imgur.com/vTi93Um.jpg[/t]
I use this gun to hunt predators.
Remove the foregrip and that gun will be Beefy McBeefington
I run it without the foregrip, I only added it for extra silliness, and because the 203 came with a rail on it.
[t]http://i.imgur.com/me0QgR2.jpg[/t]
That M203 grip setup reminds me of this, even though it's not RIS-mounted.
[url]http://www.wgcshop.com/wgc2008/main/product_detail1.php?search_From=searchItem&item=GP-ACC-877B&search=special&rs=m203&catid=&cat=&view_choice=a[/url]
[QUOTE=Malikyte;45983945]That M203 grip setup reminds me of this, even though it's not RIS-mounted.
[url]http://www.wgcshop.com/wgc2008/main/product_detail1.php?search_From=searchItem&item=GP-ACC-877B&search=special&rs=m203&catid=&cat=&view_choice=a[/url][/QUOTE]
Something like this needs to exist for the MP5k foregrip. There is literally no other way to attach a light other than zipties or some JB weld magic. I can't imagine it'd be particularly hard to fabricate either.
[QUOTE=TerrorShield;45984006]Something like this needs to exist for the MP5k foregrip. There is literally no other way to attach a light other than zipties or some JB weld magic. I can't imagine it'd be particularly hard to fabricate either.[/QUOTE]
[img]http://www.laserdevices.com/webart/products/more/24_06.jpg[/img]
[QUOTE=Wulfram;45984036][img]http://www.laserdevices.com/webart/products/more/24_06.jpg[/img][/QUOTE]Found that while building the anti-notrabies MP5k, it only exists in the real steel market and the company who makes it disappeared or discontinued it or something so it's impossible to find nowadays. I did my research, trust me.
[editline]14th September 2014[/editline]
this was the best result
[url]http://www.sears.com/laser-devices-laser-devices-h-k-mp5k-grip-200/p-SPM9875596118[/url]
[QUOTE=TerrorShield;45984006]Something like this needs to exist for the MP5k foregrip. There is literally no other way to attach a light other than zipties or some JB weld magic. I can't imagine it'd be particularly hard to fabricate either.[/QUOTE]
[img]http://www.shortyusa.com/cart/images/806a.jpg[/img]
[img]http://www.airsoftgi.com/images/airsoft_NCS_45ScopeRail_Package_E.jpg[/img]
[QUOTE=BBOOBBYY!;45984576][img]http://www.shortyusa.com/cart/images/806a.jpg[/img][/QUOTE]
Probably my best bet but that high rise and an Eotech would mean super chinweld which I'm not all for. No thanks.
[QUOTE=BBOOBBYY!;45984576]
[img]http://www.airsoftgi.com/images/airsoft_NCS_45ScopeRail_Package_E.jpg[/img][/QUOTE]
Yeah lemme just throw a scope on my MP5k, call it a DMR, problem solved! Thanks.
[editline]15th September 2014[/editline]
something like this needs to exist where theres a rail section that drops down from a regular claw mount over the side of the upper receiver
[img]http://i.imgur.com/TganKA1.png[/img]
They have mounts that'll clamp onto the top rail and provide a side rail at about that position
[editline]15th September 2014[/editline]
Probably a little bit higher
[QUOTE=apoctank;45988329]They have mounts that'll clamp onto the top rail and provide a side rail at about that position
[editline]15th September 2014[/editline]
Probably a little bit higher[/QUOTE]
don't got a whole lot of rail space to work with
[img]http://i.imgur.com/iRW0sjd.jpg[/img]
ugh why is everything difficult
At this point you might as well just buy a railed front end for your gun.
[QUOTE=notrabies;45988503]At this point you might as well just buy a railed front end for your gun.[/QUOTE]but then it loses the essence of the mp5k
cmon notrabies you know too well we've been through this before
And of course front rails for MP5K's are hardly dime a dozen.
They kind of are. They're not really rare or uncommon.
Most MP5K's i've seen people using around here have been railed.
Back when I had an MP5K-PDW I couldn't get even a sniff of a front rail for it, of course now I check theres loads
fucking typical......
[QUOTE=TerrorShield;45988756]but then it loses the essence of the mp5k
cmon notrabies you know too well we've been through this before[/QUOTE]
Not at all, just put on the classic Tango Down foregrip and a standard handstop and it looks largely the same.
Also, on the chance you're not just being sarcastic, we haven't been over this before. From prior conversations the only reason you wanted an MP5K was for the performance of the Galaxy, and then you modified it because you hated the looks of the original gun.
[QUOTE=notrabies;45989007]Not at all, just put on the classic Tango Down foregrip and a standard handstop and it looks largely the same.
Also, on the chance you're not just being sarcastic, we haven't been over this before. From prior conversations the only reason you wanted an MP5K was for the performance of the Galaxy, and then you modified it because you hated the looks of the original gun.[/QUOTE]
[QUOTE=TerrorShield;45354652]I specifically want the MP5K because it doesn't have the disgusting MP5 RIS that just about every "tactical" MP5 has.[/QUOTE]
[editline]15th September 2014[/editline]
Although the TD vfg and handstop actually might not look too bad with a really short low profile RIS - that isn't the stupid Swordfish system - if that exists anywhere.
[QUOTE=TerrorShield;45989311][editline]15th September 2014[/editline]
Although the TD vfg and handstop actually might not look too bad with a really short low profile RIS - that isn't the stupid Swordfish system - if that exists anywhere.[/QUOTE]
Take your pick:
[url]http://shop.ehobbyasia.com/ics-ris-foregrip-for-mx5k-mp5k-pdw.html#.VBdyBBbMHkc[/url]
[url]http://shop.ehobbyasia.com/nitro-vo-mp5k-rail-handguard.html#.VBdx1RbMHkc[/url]
[url]http://shop.ehobbyasia.com/surefire-h-k-mp5k-picatinny-rail-system-m77-1.html#.VBdx9RbMHkc[/url]
Although all of those would benefit greatly from having the rails cut down.
The ICS looks like the most viable option but compatibility is a concern, the ICS mag release replacement parts are out of spec for TM/clones, but who knows maybe it'll just fit. Thanks I'll keep that in mind.
[QUOTE=TerrorShield;45990088]The ICS looks like the most viable option but compatibility is a concern, the ICS mag release replacement parts are out of spec for TM/clones, but who knows maybe it'll just fit. Thanks I'll keep that in mind.[/QUOTE]
ICS should fit, most MP5's seem to be designed to take real spec handguards. Also, in addition to being the cheapest it looks the best.
[img]http://fc04.deviantart.net/fs71/i/2014/244/0/1/kalash_carbine_by_taiwaneseprick-d7xkbls.jpg[/img]
[img]http://fc05.deviantart.net/fs70/i/2014/244/a/c/benelli_brothers_by_taiwaneseprick-d7xe9rz.jpg[/img]
[img]http://fc09.deviantart.net/fs71/i/2014/242/8/5/g3a4_by_taiwaneseprick-d7xc4xr.jpg[/img]
[img]http://fc04.deviantart.net/fs70/i/2014/237/4/c/classic_colt_by_taiwaneseprick-d7wp1k6.jpg[/img]
[img]http://th06.deviantart.net/fs70/PRE/i/2014/236/4/0/black_rifles_by_taiwaneseprick-d7wkson.jpg[/img]
All these late uploads
Sorry, you need to Log In to post a reply to this thread.
