[QUOTE=Zero_X54321;46702911]I want to find a Real Sword SVD but I wouldn't even know where to start looking.[/QUOTE]
May I suggest Google?
[url]http://www.redwolfairsoft.com/redwolf/airsoft/Sniper_Rifles_Real_Sword_Real_Sword_RS_SVD_AEG_with_Scope.htm[/url]
[url]http://shop.ehobbyasia.com/real-sword-rs-svd-aeg-with-scope-pre-order.html#.VIvquns09Lo[/url]
[url]http://www.airsoftstation.com/real-sword-svd-dragunov-sniper-rifle-aeg/[/url]
[url]http://www.foxairsoft.com/airsoft-guns/rifles/real-sword-svd-aeg/[/url]
Literally the first results.
I'd recommend Fox. They're based out of Colorado and have fair prices and free shipping for orders past a certain amount (which is REALLY nice with as big and heavy as the RS SVD is; 4 feet long and like 9+ pounds). I bought my LCT AK-74M from them, didn't have any issues.
[editline]13th December 2014[/editline]
Also I personally wouldn't bother spending the extra ~$200-ish on the version of the RS SVD that comes with a scope. Just buy a Belomo POSP or something off eBay. They're real-steel scopes and good quality, plus the RS PSO-1M2 uses a yellow LED inside it and the crosshairs are hard to see, the Belomo usually uses red LED and it's easier to see the crosshairs. Just make sure you get the right mount, as you can get POSPs with different mount types (e.g. RIS and AK, you want the SVD mount unless you're going to use a side-mounted RIS scope mount)
Only issue with Fox is they say they only have it on special order, and I can only imagine the hell of trying to special order anything from Real Sword.
[QUOTE=notrabies;46703199]Only issue with Fox is they say they only have it on special order, and I can only imagine the hell of trying to special order anything from Real Sword.[/QUOTE]
Considering you can order stuff directly from Real Sword, I doubt very seriously there's going to be any issues with a special order through a retailer.
JG G36's are the best clones.
[video=youtube;FYZ8FbCnO6E]http://www.youtube.com/watch?v=FYZ8FbCnO6E[/video]
[IMG]http://i58.tinypic.com/13z37u8.jpg[/IMG]
My new go to gun:
Vfc 416c with 416cqb rail and barrel extension
Surefire flash hider(stock was on in picture)
Repro m600c direct mounted to the rail
Peq w/laser(battery box was on in picture)
Repro t1
416c ironsights
-internals
Prometheus tightbore
G&g hop up unit(had a prowin but it had issues)
Prometheus flat hop bucking
Extended nub
Lonex gearbox
BTC Chimera mkii mosfet
Shs high torque motor
deans connectors
374 Fps w/ .2
well
[img]http://i.imgur.com/ikLtiVv.jpg[/img]
this happened
Lets cross barrels.
[t]https://pp.vk.me/c625718/v625718419/113f2/V_0xa9Lxq_M.jpg[/t]
553 feels like one of the best airsoft purchases of mine
gun with it and rear sight feels like ASSAULT TACTICAL BATTLE RIFLE and "some carbine meh" without it
still needs matech or KAC rear flip up sight
[QUOTE=BBOOBBYY!;46719950]well
[IMG]http://i.imgur.com/ikLtiVv.jpg[/IMG]
this happened[/QUOTE]
I know it's Cybergun, but it's a great lill thing trust me.
[t]http://fc07.deviantart.net/fs70/f/2014/218/9/0/p226_replica_2_by_arthuro12-d7tzs4h.png[/t]
Played both indoor and outdoor with it 10+ games, be sure to get extra/spare mags though.. they seem to wear out a lill and get feeding issues with the bbs and the co2.
Other than that, loads of hits with it.
[t]http://i.imgur.com/9sisxvt.jpg[/t]
My UMP .45 along with the red-dot scope and bipods that everyone hates.
Where'd you get that bipod?
My dad gave it to me earlier because he didn't need it anymore for his M14 rifle.
[IMG]https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-xap1/v/t1.0-9/10801467_1044504112229785_1248473337209532416_n.jpg?oh=fb5c90a363d2b301bdcd1ad02b88c283&oe=550656A1&__gda__=1430733464_ec2a92dbed4fce6473cfd1bb4169bfc4[/IMG]
Finally got the brick...I mean Elcan from mousecop
Got some hydrodipping done.
[IMG]https://lh3.googleusercontent.com/-_TJA_4Ks_ZE/VJQvYKfeYyI/AAAAAAAAA_0/Es1xlq0yEKk/w711-h400-no/smaller1.jpg[/IMG]
Something about the L85's build, the cuts into the receiver, the coloration of the plastic, etc, seems like a really cheap but heavy antique toy gun you'd find in a flea market. It's hard to describe why it seems like that, but it just does. But damn do I want one.
[img]http://i.imgur.com/C636DVMl.jpg?2[/img]
Photo isn't the best and the lighting makes my paint job look like TileFlage, but this is my Sun Project M16A1 Carbine. This gun was a little tough to get up and running, but the recoil is immense for an airsoft gun which just makes it a fucking blast. Still need to fine-tune the R-Hop installation when I get some free time though. I also need to pick up a PEQ-II so I can join the IFAP Tora Bora Agora.
How do you like the Sun Project guns? I've been looking at picking one up for a long time but never been able to pull the trigger.
[QUOTE=Jaster Mereel;46767816][img]http://i.imgur.com/C636DVMl.jpg?2[/img]
Photo isn't the best and the lighting makes my paint job look like TileFlage, but this is my Sun Project M16A1 Carbine. This gun was a little tough to get up and running, but the recoil is immense for an airsoft gun which just makes it a fucking blast. Still need to fine-tune the R-Hop installation when I get some free time though. I also need to pick up a PEQ-II so I can join the IFAP Tora Bora Agora.[/QUOTE]
Cool, but still not CAGish enough :)
I absolutely love their 2001-2007s guns with john mansen recoil pads and gangsta grips and stuff
[QUOTE=Jaster Mereel;46767816][IMG]http://i.imgur.com/C636DVMl.jpg?2[/IMG]
Photo isn't the best and the lighting makes my paint job look like TileFlage, but this is my Sun Project M16A1 Carbine. This gun was a little tough to get up and running, but the recoil is immense for an airsoft gun which just makes it a fucking blast. Still need to fine-tune the R-Hop installation when I get some free time though. I also need to pick up a PEQ-II so I can join the IFAP Tora Bora Agora.[/QUOTE]
"M16A1 carbine"
Did you cut off the carry handle, or do the Sun Project flat top uppers just not have brass deflectors for some reason?
they made flat top m16a1 uppers this is cod black ops fantasy come true
Nah, that's my old blaster. It's an M16A2 carbine with the carry handle chopped and a rail bolted in its place.
I really cannot understand why anyone would do that to a Sun Project when there are literally a million other airsoft ARs with flat tops already.
Because it's a somewhat unique system (modding an AEG or GBBR upper would be tedious), and production flat tops for Sun Projects either never existed or have gone out of production, I think.
Scaar from AATV had a flat top SP M16, though from what they say I figure out it's somehow custom made.
[media]http://www.youtube.com/watch?v=u3gg9e06U2M[/media]
Also look at the barrel profile
[QUOTE=FloaterTWO;46770620]I really cannot understand why anyone would do that to a Sun Project when there are literally a million other airsoft ARs with flat tops already.[/QUOTE] This mod was performed before GIM GBBRs and DaytonaGun existed. Sun Project was the only game in town for a GBB AR, and they were limited in what they could build since they used JAC bodies. I wouldn't chop a Sun Project receiver now, but I'm happy mine was.
[quote=Forever_Forum]Cool, but still not CAGish enough :)
I absolutely love their 2001-2007s guns with john mansen recoil pads and gangsta grips and stuff[/quote] My recoil pad is still in the mail, [s]as are parts for a gangsta grip.[/s] DISREGARD, FORGOT WHAT I ORDERED I just really wanted to get a picture of my blaster to show IFAP/ramirez!.
[quote=Zao Medong]How do you like the Sun Project guns? I've been looking at picking one up for a long time but never been able to pull the trigger. [/quote] I haven't gotten a chance to take this out to field yet, so you'd have to ask ramirez! reference actual performance. I can tell you that it took me a serious amount of tinkering to get it up and running properly, and then some more to make sure the externals were secured.
[QUOTE=Jaster Mereel;46774616]This mod was performed before GIM GBBRs and DaytonaGun existed. Sun Project was the only game in town for a GBB AR, and they were limited in what they could build since they used JAC bodies. I wouldn't chop a Sun Project receiver now, but I'm happy mine was.[/QUOTE]
Off topic but nice username, Boba Fett/10
just put this together with a combat machine rental i bought for dirt cheap
[t]http://i.imgur.com/39IWmb6.jpg[/t]
don't worry, i put some flip up sights on after i took this picture. i'm not one of THOSE people
[QUOTE=dong;46776478]just put this together with a combat machine rental i bought for dirt cheap
[t]http://i.imgur.com/39IWmb6.jpg[/t]
don't worry, i put some flip up sights on after i took this picture. i'm not one of THOSE people[/QUOTE]
But you won't be able to go fast!
Sorry, you need to Log In to post a reply to this thread.
