Wait are you using a dremel to sand the slide down? I'd get some sand paper of varying grit and do it by hand, get a much more consistent finish. For best results place a sheet of sandpaper on a flat, smooth surface, tape it down, then rub the slide across it. That's what I usually do for parts I make at work.
At the current stage I'd start with some 300 grit, then 600, then some 1000-2000 to finish it up.
Wait to use the dremel at the very end to do the polishing
KAC suppy and Madbull barrel extension came in from eHobby! Spirit a.k.a. [I]mousepad gun [/I]​now comes in carbine flavour!
[IMG]http://db.tt/SydyTn7C[/IMG]
[SUP]Bastards sent me the wrong kind of ranger plates though[/SUP]
When does your non-lime flavoured RIS come in?
is that the magpul PTS acs stock or just some no name brand china one?
[QUOTE=Wulfram;40661010]When does your non-lime flavoured RIS come in?[/QUOTE]
Gonna be ordering it from Redwolf UK today! Only just got back in stock.
[QUOTE=dwt110;40661082]is that the magpul PTS acs stock or just some no name brand china one?[/QUOTE]
China clone of the real Magpul ACS stock.
[QUOTE=xXEnder007Xx;40658927]Wait are you using a dremel to sand the slide down? I'd get some sand paper of varying grit and do it by hand, get a much more consistent finish. For best results place a sheet of sandpaper on a flat, smooth surface, tape it down, then rub the slide across it. That's what I usually do for parts I make at work.
At the current stage I'd start with some 300 grit, then 600, then some 1000-2000 to finish it up.[/QUOTE]
Because I'm a lazy asshole and sanding along the angles is a pain.
[QUOTE=hiyougami;40661270]Gonna be ordering it from Redwolf UK today! Only just got back in stock.
China clone of the real Magpul ACS stock.[/QUOTE]
how do ye like it. I think i am going to get one for my gun soon.
[QUOTE=dwt110;40663181]how do ye like it. I think i am going to get one for my gun soon.[/QUOTE]
ACS stock is beautiful, just don't think you're gonna get anything larger than a stock tube lipo in there (at least the ACM version I got).
Demonstration of features/usefulness is a candy storage unit
[video=youtube;U6k8Oz0Y-Lw]http://www.youtube.com/watch?v=U6k8Oz0Y-Lw[/video]
I can tell you used proper procedure whilst demonstrating your new stock.
Priority 1. is it retractable?
Priority 2. can it fit a twix bar?
[editline]16th May 2013[/editline]
Because let's be honest, those two things are the only things people really wonder about stocks.
[QUOTE=felix the cat;40667647]rip FNC
[/QUOTE]
Sold it?
Every time you post that gun you make me sad that i don't have one and won't be able to afford one for a long time.
Did you sell it just because you wanted something else, or did it have any problems?
I sold it just because I didn't really need it. I had too many guns and it didn't really perform any better than the MP5, yet weighed about 3 times as much, so the MP5 gets to stay. It's a super cool gun, but it just didn't get much use anymore, so it had to go.
[img]http://imageshack.us/a/img819/9393/201305162225471.jpg[/img]
Progress. This half of the frame is almost done, needs a couple of small touches. I'm really liking this "bad" finish the dremel + my inconsistency gives it. I just wish that I didn't have tiny steel brush bits all over my arm.
Also hoping to fix what you may see in the foremost part of the frame, right where the light is centered ([del]was trying to hide the failure[/del] TOTALLY NOT HIDING ANYTHING) I was stupid and did something very stupid.
Oddly enough, I too like your shitty dremel job. Kind of gives it a pearlescent quality in this lighting.
[img]https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-frc1/400711_10201375071163850_701101641_n.jpg[/img]
Post AP testing stress-reliever pat-on-the-back congrats on your 2 gold-star-you-tried work harder asshole gift to myself/surprise for daddy taiwaneseprick when he comes home from taiwan I guess.
we?
yup
Get a PGC slide/barrel kit for it. Trust me
[QUOTE=felix the cat;40672575]Get a PGC slide/barrel kit for it. Trust me[/QUOTE]
for maximum realistic trades?
for maximum your barrel not snapping off at the chamber
[editline]16th May 2013[/editline]
but also for trades, that's just a bonus
is shooters design cool to?
i like their 4.3 infinity slide
Yes.
I got a thing
[t]http://filesmelt.com/dl/IMG_05365.JPG[/t]
That's the KWA KMP9, right?
Does it shoot CQB legal?
I really want one.
Mine chronos in the 370s. but you can get a [url=http://dangerwerx.com/cqb/]flute valve[/url] that drops it down to <350
It looks like an ideal CQB primary, to me.
Also, makes me think of RE4, the TMP was the shit.
same gun some differences
hnnngh that XPS
[QUOTE=Joetehpsycho;40680104]It looks like an ideal CQB primary, to me.
Also, makes me think of RE4, the TMP was the shit.[/QUOTE]
I've always wanted to get one and make it like that, but the fixed TMP stock is impossible to find for an MP9. It exists, its just extremely enigmatic.
Sorry, you need to Log In to post a reply to this thread.
