[QUOTE=Wulfram;40984230]So my operate m4 is done.
(pics)[/QUOTE]
I sorta wanna see that with an M203
I dunno why but I always think M203s look incredibly cool on well rounded looking M4s
[QUOTE=JimmyA;40988983]mod 1 u egg[/QUOTE]
block II mod 0
[QUOTE=Back_Slash;40991001]block II mod 0[/QUOTE]
wait fuck i confused myself
u have been rused
[QUOTE=Kill001;40989622]I sorta wanna see that with an M203
I dunno why but I always think M203s look incredibly cool on well rounded looking M4s[/QUOTE]
I've been thinking about buying an M203. Maybe I'll pick one up.
Not sure if these belong here or in tacticlol, so they're going in both:
[IMG]http://i.imgur.com/rI6hMm4l.jpg[/IMG]
[IMG]http://i.imgur.com/HcMWmBFl.jpg[/IMG]
Found two of my guns in booths at Airsoft Nation, so I decided to take before and after pictures:
[IMG]http://i.imgur.com/yQSoTB7l.jpg[/IMG]
[IMG]http://i.imgur.com/dRsE8tAl.jpg[/IMG]
[QUOTE=GREN EYGS N HAM;41007017]I really like that OD frame.[/QUOTE]
It's more like light CB than OD, it was hard to get good lightning when I took those photos
[editline]12th June 2013[/editline]
And I'm considering just putting it in a bucket of stronk alcohol or thinner or something, it's black underneath and I like that better.
[QUOTE=apoctank;41008332]There needs to be a jealousy rating[/QUOTE]
"zing for jelly" was a thing
im so gelly of the g3
its the gun i would want if i were in an 80's/90's heist movie
[QUOTE=Inafinus :3;41010404]im so gelly of the g3
its the gun i would want if i were in an 80's/90's heist movie[/QUOTE]
also a South American xXxScRuBL0rDxXx in Act of Valor used it to shoot through a wall and mortally wound a s00per tier wun devgru CAG SOCOM AOR1 Multicum CRYEORDIE Navy SEAL in Act of Valor, so G3s are pretty 11/10 in my book.
[img]http://www.imfdb.org/images/thumb/6/65/AOV-HK91-2.jpg/800px-AOV-HK91-2.jpg[/img]
pic related it's the scrublord
It hit him in the eye and didn't kill him. Then again it went through a wall first.
jordan fix your g3, everything on it is super wobbly
if my mp5 handguard creaks a lot, that g3 must sound like a mortally wounded narwhal
[QUOTE=Foxton;41014904]jordan fix your g3, everything on it is super wobbly[/QUOTE]
the stock was wobbly because it was held on with zip ties; Fish sent me real steel G3 pins which I'll use when I get real-steel G3 furniture on the thing. The pins don't fit right now because the TM stock holes are slightly smaller than their real dimensions. Currently, I have little straw segments that I cut to size and stuck in the holes to get the right thickness, which is what Jon told me to do.
Handguard-wise I fixed the creaking by wrapping tape around the barrel and making the thing more sturdy.
does tm g3 have an outer barrel or is the inner just exposed running through handguard?
[QUOTE=dwt110;41015058]does tm g3 have an outer barrel or is the inner just exposed running through handguard?[/QUOTE]
It's got an outer barrel. The outer is what I wrapped.
[QUOTE=TaiwanesePrick;41014966]the stock was wobbly because it was held on with zip ties; Fish sent me real steel G3 pins which I'll use when I get real-steel G3 furniture on the thing. The pins don't fit right now because the TM stock holes are slightly smaller than their real dimensions. Currently, I have little straw segments that I cut to size and stuck in the holes to get the right thickness, which is what Jon told me to do.
Handguard-wise I fixed the creaking by wrapping tape around the barrel and making the thing more sturdy.[/QUOTE]
just drill out the holes a little bit? thats what i would do.
[QUOTE=Fish Muffin;41015097]just drill out the holes a little bit? thats what i would do.[/QUOTE]
probably what I'll do this weekend as well (or right now) but I've never used my dad's power drill. Ever.
holy shit tm g3 is miles ahead of mp5
the bolt moves
and there is an outer barrel
its really easy
you set the gun down on a plank of wood
find a drill bit that is the same diameter as the stock pins
with the pins out, drill out the hole a little bit wider
??????????
done
[QUOTE=TaiwanesePrick;41015105]probably what I'll do this weekend as well (or right now) but I've never used my dad's power drill. Ever.[/QUOTe]
if you're afraid of hurting the gun use a low torque setting first
You could also ask your dad to do it for you if he's a little more of a craftsman than you.
[img]http://imageshack.us/a/img22/7204/201306131649011.jpg[/img]
bobby joins the 7,62x51 club
It's me again. Hello everyone.
New project is an East German rifleman impression, so I've gone about converting a DBoys RK-06 into an MPi-AK-74n. I put an original set of NVA furniture on it and painted my mags to resemble bakelite. It just needs a buttplate and it's good to go.
[img]http://24.media.tumblr.com/26abfa10cd1be888865c9c9f8cc41e28/tumblr_mocqhqtvie1qgd3nfo1_1280.jpg[/img]
Puuuuurdeh.
Sorry, you need to Log In to post a reply to this thread.
