Post Your Guns V4. AK47's for everyone! - General

The guns aren't parallel

I changed my M4 setup for the first time in like two years. [t] http://filesmelt.com/dl/securedownload_25.jpg[/t] My PEQ2 is broken and until I get the CA PEQ2 which is hopefully better I have to use this PEQ15? I think it is. Put my ACOG on it, rail covers out the ass, changed out the grippod and the new QD mount is on it. The picture makes it look like my stock is at an angle, in reality it either isn't at all or I can't notice it.

Why is the picture upside down when I enlarge it

[img]http://i99.photobucket.com/albums/l296/catbarf/Airsoft/100_0324_zps0b7169bf.jpg[/img]

[t]http://i.imgur.com/deQtbUz.jpg[/t]

[QUOTE=apoctank;41790287]The guns aren't parallel[/QUOTE] [IMG]http://gyazo.com/da76109e73a2072971c1b1d9ec706d41.png[/IMG] better????? m16 is pink, t65k2 is blue

in other words, the T91 stock is not longer than an M16 stock

[QUOTE=catbarf;41801178][img]http://i99.photobucket.com/albums/l296/catbarf/Airsoft/100_0324_zps0b7169bf.jpg[/img][/QUOTE] p*?

Please don't assume every gun with an external rig is a P*, there are tons of guns out there that use external rigs. This happens to be an M1100 in an M1014 body

polarstar shotguns u wot m8 I think it's the internals of one of his maruzens with the M1014 kit someone was making a while back.

If by "the M1014 kit someone was making a while back" you mean a repurposed trishot, then yes.

I remember seeing a thread about an XM1014 kit someone was making for Maruzen shotguns a while ago, so i was assuming that had come to fruition. I also exercised my unbeatable reading skills and thought it was Notrabies. I saw gas shotguns and thought 'must be Notrabies' :v:

i think he was joking because he knows that rabies always gets asked if he has a polar star shotgun

Nope, this is Catbarf's home build, he took a DE M1014 Trishot, and used Maruzen internals and put it on external CO2. I built the base Maruzen up for him, but he did literally everything this time on the project, since I was away when he finally got to building it. The M1014 Kit is a full aircraft grade aluminum body custom made for Maruzen internals, being done by Schaap over at Arnie's. However, he's been moving and doing real life stuff for quite a while, but he is still making little refinements until he can get back to finishing it.

Updates on my FAMAS: I got the Rail of the G36, the Famas handle off and the charging handle modified. Just need to attach the rail and make the side panels that go towards the rear of the rail and I'll be pretty much done. Also, it looks cool with no just a flat top. [IMG]http://i40.tinypic.com/8y9p3s.jpg[/IMG] [IMG]http://i39.tinypic.com/1zqvfx3.jpg[/IMG] The stuff under the rail is tape just so I could see how it looks.

Just my opinion but I think it would look way nicer with an IdZ style rail.

idk famas is just a chunky looking gun, it looks really odd with the low profile g36 rail

It looks pretty alright without the rails.

[QUOTE=mousecop;41812660] [IMG]http://i39.tinypic.com/1zqvfx3.jpg[/IMG] The stuff under the rail is tape just so I could see how it looks.[/QUOTE] Fuq everyone I think it looks amazing hes going for a felin here, guys, this is a felin.

ain't a felin without the scope large enough to produce noticeable gravitational effects

hell get to that point eventually its a wip

[QUOTE=Taepodong-2;41813531]Just my opinion but I think it would look way nicer with an IdZ style rail.[/QUOTE] Probably, but the Felin rail looks most like this one [QUOTE=dwt110;41813559]idk famas is just a chunky looking gun, it looks really odd with the low profile g36 rail[/QUOTE] When I'm done it wont even look like a G36 rail [QUOTE=Binladen34;41813611]It looks pretty alright without the rails.[/QUOTE] I think so too! [QUOTE=Desert Rat;41814498]Fuq everyone I think it looks amazing hes going for a felin here, guys, this is a felin.[/QUOTE] THANK YOU. I guess you're the only one that remembered lol. [QUOTE=the_killer24;41814509]ain't a felin without the scope large enough to produce noticeable gravitational effects[/QUOTE] [url]http://beetlebuys.com/outdoors-hunting/optics/night-vision/24072-atn-mk390-paladin-1-scope-nvwsm39010.html?ref=googlebase[/url] dead srs

too small 2/10

needs a pvs-2

[QUOTE=the_killer24;41818371]too small 2/10[/QUOTE] My bad, I meant to post this one. [url]http://www.opticsplanet.com/celestron-powerseeker-50-astronomical-telescope.html?gclid=CNzhyeDE-bgCFUqk4AodPT4AbA&ef_id=UFWPSAAASpnQpXRR:20130813040136:s[/url]

[QUOTE=the_killer24;41818371]too small 2/10[/QUOTE] No EOTech as secondary optic 0/10 [editline]12th August 2013[/editline] This is the only acceptable optics setup on a FAMAS Felin [img]http://www.thefirearmblog.com/blog/wp-content/uploads/2013/01/Felin-FAMAS.jpg[/img]

Those goggles just scream "Danger: lasers in use"

[t]http://i.imgur.com/PMhS8qy.jpg?1[/t] (black's where the gun wore away the finish, unnoticeable with the mag loaded) (also more orange less yellow irl)

[IMG]http://i42.tinypic.com/v8dfth.png[/IMG]

[QUOTE=Taepodong-2;41818687]No EOTech as secondary optic 0/10 [editline]12th August 2013[/editline] This is the only acceptable optics setup on a FAMAS Felin [img]http://www.thefirearmblog.com/blog/wp-content/uploads/2013/01/Felin-FAMAS.jpg[/img][/QUOTE] how do you use the optic when it's so high over the barrel like that?