[QUOTE=upsideonion;42003167]couldn't you just tilt it 90 degrees?[/QUOTE]
I might just call that, the "right hook"
[editline]28th August 2013[/editline]
Have some more rifles:
[IMG]http://i.imgur.com/f9aqGRxl.jpg[/IMG]
[IMG]http://i.imgur.com/3fFd7ZBl.jpg[/IMG]
also the whole mag placement issue unless you're using a decorative mag with the real mag in normal position or some sort of weird sideways derivation of the marui aws
[QUOTE=the_killer24;42003701]also the whole mag placement issue unless you're using a decorative mag with the real mag in normal position or some sort of weird sideways derivation of the marui aws[/QUOTE]
I have a broken M14 mag that I might modify to look decent
i was talking about the valve but yeah go for it
it'd look a hell of a lot better than the current flat receiver underside
what about a sten hop up unit?
i don't think you understand how traditional spring sniper rifles work
[t]http://www.instructables.com/files/deriv/F5X/FW7H/FQCTO0TW/F5XFW7HFQCTO0TW.LARGE.jpg[/t]
the left hole is where the real mag would go
the right hole is where the airsoft mag goes
Or...uh...this can happen....
[IMG]http://i41.tinypic.com/1z32ey0.jpg[/IMG]
[QUOTE=the_killer24;42003812]i don't think you understand how traditional spring sniper rifles work
[t]http://www.instructables.com/files/deriv/F5X/FW7H/FQCTO0TW/F5XFW7HFQCTO0TW.LARGE.jpg[/t]
the left hole is where the real mag would go
the right hole is where the airsoft mag goes[/QUOTE]
i know
but... but...
you know what forget the 90 degrees mag
[QUOTE=upsideonion;42003757]what about a sten hop up unit?[/QUOTE]
IIRC it's just a sideways AK hop up. Meaning it's useless.
[img]http://puu.sh/4dBAo.png[/img]
sure looks useless and/or sideways ak chamber
[QUOTE=Taepodong-2;42004361]IIRC it's just a sideways AK hop up. Meaning it's useless.[/QUOTE]
lol what
Dammit, the whole point of this was to lighten the gun, now you've got me adding shit to it lol
[IMG]http://i.imgur.com/NnsnBW4l.jpg[/IMG][IMG]http://i.imgur.com/j1jxMkHl.jpg[/IMG]
How did you rig up the stock and pistol grip?
Ehhh, I'd shorten it quite a bit.
[QUOTE=Kath;42004531]Ehhh, I'd shorten it quite a bit.[/QUOTE]
This. Make an L96 Obrez, You know it is your duty.
My CQB arena actually has several L96 Obrez's, I'll try to remember to take a picture next time I'm there.
[QUOTE=Apache249;42004530]How did you rig up the stock and pistol grip?[/QUOTE]
The stock is already attached to the inner "frame" of the gun, and the grip is taped on :v:
[QUOTE=Kath;42004531]Ehhh, I'd shorten it quite a bit.[/QUOTE]
If I could, but that would be limited to shortening the inner and outer barrel, which will be either very expensive(or at least more expensive than I'm willing to go), really difficult, or both
[editline]28th August 2013[/editline]
[QUOTE=FloaterTWO;42004546]This. Make an L96 Obrez, You know it is your duty.[/QUOTE]
This is about as short as I can go for the time being, and it wouldn't even fire like this:
[IMG]http://i.imgur.com/e7HHKPOl.jpg[/IMG]
I can remove the fake mag btw
[QUOTE=apoctank;42004559]The stock is already attached to the inner "frame" of the gun, and the grip is taped on :v:
If I could, but that would be limited to shortening the inner and outer barrel, which will be either very expensive(or at least more expensive than I'm willing to go), really difficult, or both
[editline]28th August 2013[/editline]
This is about as short as I can go for the time being, and it wouldn't even fire like this:
[IMG]http://i.imgur.com/e7HHKPOl.jpg[/IMG]
I can remove the fake mag btw[/QUOTE]
Sorry I'm dumb, I meant shorten the mag.
[QUOTE=Kath;42004670]Sorry I'm dumb, I meant shorten the mag.[/QUOTE]
but metal aaaaaaaah
Dremel, bruh.
why not keep it how it is
just build a magwell around the tiny mag
then it looks like some kind of homemade sniper rifle from fallout or something
*also just me but i [B]hatehatehatehate[/B] fake magazines*
[t]http://i.imgur.com/RExa8PJ.jpg[/t]
classic army G3 offizier, got a extended barrel and hanguard on it
[t]http://i.imgur.com/fW7piDK.jpg[/t]
painted the furniture OD green
[t]http://i.imgur.com/tznLCAb.jpg[/t]
ready to op-r8?
[t]http://i.imgur.com/kbcB1AD.jpg[/t][t]http://i.imgur.com/fb71zcc.jpg[/t]
[t]http://i.imgur.com/A9wFAg6.jpg[/t][t]http://i.imgur.com/9eKl8bY.jpg[/t]
Tyler, how's the JG? My brother is looking into getting that exact one for HECU
[QUOTE=Dark Descent;42013133]Tyler, how's the JG? My brother is looking into getting that exact one for HECU[/QUOTE]
Wonderful. The stock barrel only goes half way in to the suppressor. The range isn't spectacular as you'd expect, but its acceptable. What makes it wonderful is the 24RPS with a lipo. I like it. Mags don't feed though. I also love the hop up system. Instead of the little sliding bar like on a galaxy mp5k, it has a lever that sticks out of the hand guard.
[QUOTE=Dark Descent;42013133]My brother is looking into getting that exact one for HECU[/QUOTE]
THERE IS ANOTHER!
Seriously I think it's weird as hell that I've seen maybe one person online with an HECU-themed airsoft loadout.
I want that mp5.
[QUOTE=Repulse`;42020170]I want that mp5.[/QUOTE]
Offer. 2 high caps, bypassed fuse, wired to deans(but I can include deans->tamiya plug)
[editline]30th August 2013[/editline]
Also put a more appropriate length inner barrel in it, but its still brass.
[QUOTE=Herfjotur;42021494]Offer. 2 high caps, bypassed fuse, wired to deans(but I can include deans->tamiya plug)
[editline]30th August 2013[/editline]
Also put a more appropriate length inner barrel in it, but its still brass.[/QUOTE]
shit now I want this too
New frame and inner-barrel
[t]http://imageshack.com/a/img716/479/xa9g.jpg[/t]
Sorry, you need to Log In to post a reply to this thread.
