Just realized I never posted my mp9
[IMG]http://imgur.com/N9a5cof[/IMG]
TM Glock 18C
[IMG]http://i42.tinypic.com/120gzt2.jpg[/IMG]
Had so much fun with it I emptied out a full can of green gas by letting it rip full auto (No propane adapter yet since I never really owned a gbb I run as primary before)
The normal mags hold the charge really shitty and have cooldown problems but my extended mags work like magic
[QUOTE=BBOOBBYY!;42377871]Blocky RIS = best RIS.
[img]http://3.bp.blogspot.com/-EchAbdUJoYU/To-NrTkFm-I/AAAAAAAAAQo/zONo3hrvyas/s1600/MK14MOD2.JPG[/img]
Blocky RIS galore[/QUOTE]
oh god I love the Juggernaut Rogue
Woops broken link
[IMG]http://i.imgur.com/N9a5cof.jpg?1[/IMG]
An old gun for those on the run feat. MP9
[QUOTE=Kill001;42380495]TM Glock 18C
[IMG]http://i42.tinypic.com/120gzt2.jpg[/IMG]
Had so much fun with it I emptied out a full can of green gas by letting it rip full auto (No propane adapter yet since I never really owned a gbb I run as primary before)
The normal mags hold the charge really shitty and have cooldown problems but my extended mags work like magic[/QUOTE]
Can TM take propane without fucking up?
[QUOTE=BBOOBBYY!;42383497]Can TM take propane without fucking up?[/QUOTE]
For a while, yes. I'm not an expert on this subject, but I'm getting a TM and plan to run propane.
[QUOTE=BBOOBBYY!;42383497]Can TM take propane without fucking up?[/QUOTE]
Yes. I've never run mine on anything but propane (and green gas which was just once) and I've never had a problem except on a day where it was like 95+ degrees(F)
Well keep in mind that this does depend on which TM you're talking about as well as the temperature.
I would not want to run a 5-7 or M870 in 100 degree weather.
[QUOTE=BBOOBBYY!;42377871]Blocky RIS = best RIS.
[img]http://3.bp.blogspot.com/-EchAbdUJoYU/To-NrTkFm-I/AAAAAAAAAQo/zONo3hrvyas/s1600/MK14MOD2.JPG[/img]
Blocky RIS galore[/QUOTE]
I really love the rouge because 308 bullpup but i cant help but feel like its excessively bulky for no real raisin
[IMG]http://i44.tinypic.com/24nleh4.jpg[/IMG]
I just got it today, and I feel like a 6 year old.
[QUOTE=Arctic Aveng;42391328][IMG]http://i44.tinypic.com/24nleh4.jpg[/IMG]
I just got it today, and I feel like a 6 year old.[/QUOTE]
it's like being in a candy store isnt it
felt the exact same way when I got my ICS
[t]http://uppix.net/CeI1oD.jpg[/t]
well
its hella lighter than my RPK
[IMG]http://i39.tinypic.com/1zwnl1u.jpg[/IMG]
I have joined the AK club.
[IMG]http://i.imgur.com/55UwfWm.jpg[/IMG]
Shitty potato picture, but I too have joined the AK club.
[QUOTE=Joetehpsycho;42419440][IMG]http://i.imgur.com/55UwfWm.jpg[/IMG]
Shitty potato picture, but I too have joined the AK club.[/QUOTE]
Can't wait to see it in person. I went to high ground earlier and got a stick lipo an an m110. I hope cqb aks don't become a thing at High Ground. I like being different.
i'm about $20 away from the AK club
[QUOTE=BBOOBBYY!;42383497]Can TM take propane without fucking up?[/QUOTE]
You do need a 150% hammer spring though or it won't knock hard enough on the magazine. Apart from that, stock should run fine until you destroy the front screw on the frame (but again, you can but a Guarder frame for $40 to replace it.
You're looking at no more than $60 to get your TM Glock running reliably on propane.
[QUOTE=Proffrink;42431599]You do need a 150% hammer spring though or it won't knock hard enough on the magazine. Apart from that, stock should run fine until you destroy the front screw on the frame (but again, you can but a Guarder frame for $40 to replace it.
You're looking at no more than $60 to get your TM Glock running reliably on propane.[/QUOTE]
Don't forget the extra hundreds of dollars in medical bills you'll be spending after you try to install a 150% hammer spring in a TM Glock.
[QUOTE=notrabies;42435680]Don't forget the extra hundreds of dollars in medical bills you'll be spending after you try to install a 150% hammer spring in a TM Glock.[/QUOTE]
Elaborate
[QUOTE=Fish Muffin;42438882]Elaborate[/QUOTE]
The TM Glock hammer assembly is pretty complex because they've placed the valve knocker, valve knocker spring, hammer, and hammer spring all in a very small area. Installing a new hammer spring requires holding all four of those parts simultaneously, and then applying a large amount of force to position everything with one hand so you can place in a pin holding it all together with another.
When you use a 150% hammer spring, the amount of pressure I had to use was sufficient to dent my hands and make me bleed, and I had to install the final pin with my teeth because I couldn't hold the assembly in place with one hand after over an hour of working.
So, I wish I had an AK so that I could wear the fuck out of it and give it some awesome, old, used, post-apocalyptic look.
But I don't have an AK. My M249 still feels too new for me to do shit to it, and I don't have any ideas for the M14 other than painting the black plastic stock.
But I have my M4 and some stuff for it, but old railed M4's don't look right to me.
So I went back to the old evil capitalist VSS setup, slapped my new flashlight onto it and added rail covers in weird places.
AND SUDDENLY
[B][U]A SPACE GUN EMERGES[/U][/B]
[IMG]http://imageshack.us/a/img51/4655/2xz3.jpg[/IMG]
[IMG]http://imageshack.us/a/img407/6558/p4gu.jpg[/IMG]
I really need to get a new stock for it :<
I like it. Any way you could get a side-mounted light? Side-mounts seem really spacey to me for some reason.
I feel like a diagonal mount would be even more spacey
[QUOTE=apoctank;42458276]I feel like a diagonal mount would be even more spacey[/QUOTE]
Agreed
[img]http://imageshack.us/a/img46/4929/n72g.jpg[/img]
[img]http://imageshack.us/a/img89/9159/pto1.jpg[/img]
Yeah, I can put the addon rails pretty much anywhere along these holes. I actually forgot how functional that front set is.
Except that when I tried to put it on to the upper-left, the mount clamp was blocked by the upper rail :<
No foargrip for the foargripe godde?
(I ask because the bottom seems rather bare)
I know, but unfortunately my only foregrip is borked. I think an AFG or a stubby grip or some sold of a folding thingy would actually look nice there, but first I need to get a new stock. The current stock is literally falling apart, it's locked onto the buffer tube with electrical tape and the butt plate is being held by my faith.
To do:
- Nice stock
- Foregrip
- BUIS
- Internal work
Maybe later:
- Pistol grip
- Eotech
I need some space-ish futuristic parts.
[QUOTE=BBOOBBYY!;42459499]I know, but unfortunately my only foregrip is borked. I think an AFG or a stubby grip or some sold of a folding thingy would actually look nice there, but first I need to get a new stock. The current stock is literally falling apart, it's locked onto the buffer tube with electrical tape and the butt plate is being held by my faith.
To do:
- Nice stock
- Foregrip
- BUIS
- Internal work
Maybe later:
- Pistol grip
- Eotech
I need some space-ish futuristic parts.[/QUOTE]
Get one of these and press it right up to the magwell:
[url]http://www.airsoftgi.com/product_info.php?products_id=15182[/url]
That thing looks sweet. But unfortunately it's unobtainable for me :<
Needs more lasers. A lot more lasers.
Sorry, you need to Log In to post a reply to this thread.
