I wouldn't even recommend them to begin with. Those are most likely the old STAR PMAG's which didn't feed well and looked too shiny. You should go with the official 120rd Magpul PTS PMAGs or none at all.
[QUOTE=xXEnder007Xx;22817358]I wouldn't even recommend them to begin with. Those are most likely the old STAR PMAG's which didn't feed well and looked too shiny. You should go with the official 120rd Magpul PTS PMAGs or none at all.[/QUOTE]
Where can I find the official ones? The Magpul site?
Edit: Nevermind, found them on G.I.
[QUOTE=Identity;22815837]I'm paying $50 for 10. Pretty good, considering how one cost me twenty. Why not wear them all myself? Cause I'm nice...I guess?
The U.N. idea is funny though.[/QUOTE]
Man, I have been aching to get one of those too, a friend of mine has one and he let me borrow it, looked bad ass with my mask.
So my open bolt PDW arrived after much customs buggery.
Shit is nice, the movement on the gun when you fire it is crazy.
[QUOTE=CodeMonkey3;22804587]Worst part of it, he says they're going to get the new Desert Rail TAR 21's but he doesn't think they'll be getting any of the Black ones with the MARS Scope, the one I actually want.
Today is a sad day.[/QUOTE]
From what I've heard the MARS sight is terrible.
I like the desert one better anyway. But that's strictly my opinion.
[QUOTE=Tymoschuk;22832701]From what I've heard the MARS sight is terrible.[/QUOTE]
I don't want the desert paint job. I want the MARS Sight because it completes the look and it's a nice touch. I regret to this day not getting my P90 with a red-dot then the rail I got.
I know the MARS Sight sucks, I'll take it off if I hate it that much even with the iron sights. It is possible to remove it. I also have some spare rails if I wanted to add one like on the desert version.
[QUOTE=Identity;22817280]Would the Magpul 75rd PTS PMAG's fit in my G&G? Evike says they won't, yet G.I. shows them fitting.[/QUOTE]
It will fit in a G&G gun.
Trust me, I have one.
[editline]07:11PM[/editline]
[QUOTE=xXEnder007Xx;22817358]I wouldn't even recommend them to begin with. Those are most likely the old STAR PMAG's which didn't feed well and looked too shiny. You should go with the official 120rd Magpul PTS PMAGs or none at all.[/QUOTE]
The star P-mag fits with a very slight wobble in my AGM m4-A1, I wouldn't suggest them because they have bad feeding and are really cheap plastic feeling but they are decent for a budget.
Going to my first two day long airsoft event. 1 am to 5 am is sleeping time and no one can attack during that time, other than that, it's all airsoft.
I joined the terrorist team because I didn't have the camo for the other team, and something awesome happened. One, we're actually deep under cover CIA guys (only the people that joined the terrorist team know), and we have to capture the enemy leader (the actual bad guy). Second, we have a full squad of people that are wicked good at airsoft, and always destroy the other team. They find loopholes and use them just enough so they're not cheating, just thinking outside the box.
We're making smores at some point.
I don't have a tracer unit, so that sucks. Even if I did, I have no idea how to attach it to my gun, there are no threads and I can't seem to get it off (I tried boiling it to melt the glue, but nothing. It's the DBoys AK74 UN if anyone can help.)
Very nice. I want to go to one of those but they are rarely hosted here.
Anyone know anything about the Echo-1 Akm?
It's a rebrand of cyma's i believe
Would it be any good?
Yeah, it might shoot a little hot though inless they through one of there own springs (Which they generally do)
Ok, cause I was checking one out at a local store. Does Echo-1 produce any other real wood/real metal Aks, or is that it? It said Red Star Echo-1, and I feel dumb not checking what model it was.
Yeah i know which model you are talking about, It's real wood and full metal.
And I guess it's pretty good? Any word on reliability?
Jesus. The amount of hate on Ender's YouTube page is astonishing. Who the hell complains about reloading videos? Seriously. lol Man. Keep on keeping on Jon.
I had Evike call, tell me they needed the card holder confirm the order, everything is through now. Another hurtle is bound and we keep going, hopefully we'll reach the finish line.
Pretty sure I'm getting one of the floor models in the display cases from Evike.
[editline]09:19PM[/editline]
[QUOTE=Kman1;22847782]And I guess it's pretty good? Any word on reliability?[/QUOTE]
Don't take my word for anything because I don't know for sure but Echo-1 if I recall are rebranded JG and JG are decent guns to start off with and should have everything you want and will last you awhile, and if they break replacement parts -should- be around, but AK's tend to have less after market parts then say an M4.
Anybody know where I can find some funny patches I can stick on my gun?
[QUOTE=CodeMonkey3;22863545]
Don't take my word for anything because I don't know for sure but Echo-1 if I recall are rebranded JG and JG are decent guns to start off with and should have everything you want and will last you awhile, and if they break replacement parts -should- be around, but AK's tend to have less after market parts then say an M4.[/QUOTE]
Echo 1 doesn't just rebrand JG. They also rebrand A&K, Dboys and Cyma. Believe it or not they even rebranded a VFC M4.
[QUOTE=Identity;22863709]Anybody know where I can find some funny patches I can stick on my gun?[/QUOTE]
Patches on weapons are pretty gay TBH. That's what gear is for :v:
[QUOTE=Identity;22863709]Anybody know where I can find some funny patches I can stick on my gun?[/QUOTE]
I'm not even sure how you'd do that, like stickers?
[QUOTE=Identity;22860727]Jesus. The amount of hate on Ender's YouTube page is astonishing. Who the hell complains about reloading videos? Seriously. lol Man. Keep on keeping on Jon.[/QUOTE]
lol tell me about it. I don't even check my Youtube page for comments, just the videos. You'd be surprised how many stupid messages I get that say "Grow Up" or simply "You're a fag". I mean really, if you're going to criticize, do it well. I will occasionally get a few good messages with useful tips, those I really appreciate.
Hmm, is there a way to disable comments on your own youtube page?
- Nope. Just checked and I can't disable comments. But I can set it so comments need approval.
I left a comment!
[editline]11:55PM[/editline]
[QUOTE=CodeMonkey3;22865482]I'm not even sure how you'd do that, like stickers?[/QUOTE]
Stick on velcro, then velcro patches.
I assumed they had less parts, but I'm more interested in finally getting my AEG. I've been waiting for a couple years now, but life, depression and GAD got in the way. Now I'm starting back up again.
My dilemma
[U]Ak[/U]. [U]M4[/U]
Sexy. Less sexy
Not as modern looking. Modern
Lack of attachments. Attachments
I'm Arab. Shoots at Arabs
Ak.Better hop up seal and is one hot damn sexy fucking gun!
[editline]04:10AM[/editline]
In all honesty you don't really need attachments unless you plan to do a night game and you want a rail mounted flashlight. Sights and such just help for fast and easy target requisition, I would actually prefer ironsights if I had some that were nice.
[editline]04:11AM[/editline]
I also prefer classic looking guns. I wish I had a wood M14 and Thompson.
[editline]04:11AM[/editline]
That's just me.
While I would be on the complete other side of the spectrum
I like being able to customize my gun to make a more comfortable and efficient killing machine. I use red dots for fast target acquisition, or a scope for those longer range kills or simply to spot out the enemy. I'll often equipment my rifle with a laser to point out targets for friendly's to fire at, better than pointing with my finger they're somewhere over there.
AK's are just too outdated for me to use efficiently. Selector switch is in a hard to reach area, which is bad because I'm used to keeping my gun on Safe all the time until I spot a target, then I flip the switch. Mag release isn't as simple as a M4 button release, and slows down those time crucial reloads. Stocks can often be too long to use comfortably with a plate carrier, especially in CQB. At least M4's have adjustable stocks for this scenario.
In the end my M4 may look ugly (or sexy depending on your preference) but it sure does get the job done well.
Ender does have a point on customizing to your needs though. I completely agree with him on most points I just prefer the look of older guns :buddy:
It's all opinion. If he appreciates an AK he should get what he wants.
Sorry, you need to Log In to post a reply to this thread.