• Airsoft Chat Thread v3
    5,001 replies, posted
The fallout 3 bolt-action looks VERY uncomfortable to hold and looks like you could get tetanus from it. That's a bad thing.
Real men eat Tetanus for breakfast.
[QUOTE=Fenriswolf;23194506]Real men eat Tetanus for breakfast.[/QUOTE] Real men must have lockjaw and a severe case of dead then.
[QUOTE=DarkSamus;23195175]Real men must have lockjaw and a severe case of dead then.[/QUOTE] Cases of death are only a mere side affect and should subside within 24 hours. [editline]03:32AM[/editline] Lockjaw is also the reaction to the testosterone levels rising and the manly rage rising to the surface, subsides within 4 hours.
:colbert:
Bah, I'm never picking up a replica Eotech again. The one I bought had a screw that snapped when I adjusted it down. Had to open it up to fix it, and when I did, almost all of the wiring simply [i]fell[/i] out of the casing. I don't think I'll be able to fix it without new wires either. Aimpoints here I come.
[QUOTE=64k1;23197180]Bah, I'm never picking up a replica Eotech again. The one I bought had a screw that snapped when I adjusted it down. Had to open it up to fix it, and when I did, almost all of the wiring simply [i]fell[/i] out of the casing. I don't think I'll be able to fix it without new wires either. Aimpoints here I come.[/QUOTE] Wow. And I was just looking at Eotech sights too. I've been using a Centerpoint ACOG Red/Green dot sight that I picked up from Walmart. I haven't even needed to change the batteries since I've bought it a year ago.
[QUOTE=Identity;23197285]Wow. And I was just looking at Eotech sights too. [/QUOTE] [i]Replica[/i] Eotech
[QUOTE=Samsung;23197999][i]Replica[/i] Eotech[/QUOTE] I know that. Real Eotechs go for about $500 (well the one I saw). You think I'm going to spend that on a sight? Nah.
Do we really have to be so pedantic about it?
In my experience of using sights: Red dot sights: mine was broken by a direct hit by my SVD (being used by someone else obviously) Holographic eotech replica: If you try to adjust it to the maximum, the screw will get stuck, causing repairs that can break the thing. ACOG: Always served me well, never had a problem, other than it's a little more like a scope, so not as easy for quick target acquisition, IMO of course.
Someone needs to make this [media]http://www.youtube.com/watch?v=UIhwnhSmmI8&feature=related[/media]
that might just be possible to make if you rewire the trigger switch through a hinge fitting through to another trigger but from my idea it will have to be wired externally, and lets say if you used an M14 EBR as a base model for it you could probably hollow out the little kitten toy and whack a barrel through it??? well its definately possible but if it is done it will most likely cost quite a few £££
Yeah. Or you could just get two blocks of wood, Put a door hinge on them so they can bend then attach a weapon to the furthest away block then put a pistol grip on the closest to you and have a piece of string attached to the Trigger of the gun. Then you make a hole through the toy kitten and put the barrel through it. That would work but the only problem is, is that it can only bend one way so you would need to of these ingenious devices.
I'd buy that ARES scope kit if I had the money for it. Comes with an Aimpoint and an Eotech for a nice setup. I think it runs about $250.
[QUOTE=Inafinus :3;23203109]*idea*[/QUOTE] thats a well cheaper alternative im just trying to remember the name of this fitting that if you fasten in at the top and bottom of the two blocks it should allow them to move left and right, i'll edit this with the name once ive found it Edit: Got it, ball and socket joint, if you fit that AND fasten two forms of constraints at the top and bottom it will prevent movement on the y axis meaning the front block can only turn left and right on the x axis
That would be better.
and cheaper too wallets all over the world are thanking us
[img]http://www.israeli-weapons.com/weapons/small_arms/corner_shot/P3080215.jpg[/img]
What the fuck are you guys talking about? [editline]11:22AM[/editline] [QUOTE=DarkSamus;23203584][img]http://www.israeli-weapons.com/weapons/small_arms/corner_shot/P3080215.jpg[/img][/QUOTE] I want.
[url]http://midwestairsofters.com/index.php?option=com_smf&Itemid=39&topic=14253.0[/url] [editline]03:23PM[/editline] they are talking about making a cornershot
Would be ridiculously impractical for airsoft though. Maybe for looking around corners in CQB but that's all I can think of.
ive got a strange urge to break out my toolbox and give it a go, but it'll be absolitely no use to me haha no CQB sites anywhere near here
There's already a airsoft Corner-Shot. Just turn your hop-up to the max.
I'm pretty sure most people would consider it cheating, they cant hit you but you can hit them. [editline]03:29PM[/editline] [QUOTE=Identity;23203722]There's already a airsoft Corner-Shot. Just turn your hop-up to the max.[/QUOTE] I did this and got someone out before.
DO IT NOW! /caps
[QUOTE=DarkSamus;23203726]I'm pretty sure most people would consider it cheating, they cant hit you but you can hit them. [editline]03:29PM[/editline] I did this and got someone out before.[/QUOTE] See? Effective.
"Hop up at maximum power!"
but a Corner shot kitty is so much cooler. And cuter.
No. Be a man and eat Tetanus for breakfast. Use hop up at full capacity.
Sorry, you need to Log In to post a reply to this thread.