Apparently there aren't any Echo 1s around here. But the guy at the store said he could get me Classic Armys or G&Gs, or a CYMA m14 w a 2.7 scope.
[QUOTE=Kman1;23809896]Apparently there aren't any Echo 1s around here. But the guy at the store said he could get me Classic Armys or G&Gs, or a CYMA m14 w a 2.7 scope.[/QUOTE]
G&G.
What was the reputation for the DBoys M-series again? I was thinking of picking up an SPR for a project and field gun, tired of people at Tac City not actually aiming and just rushing in the paintball stance,
[QUOTE=64k1;23810750]What was the reputation for the DBoys M-series again? I was thinking of picking up an SPR for a project and field gun, tired of people at Tac City not actually aiming and just rushing in the paintball stance,[/QUOTE]
Last I heard they're shit. If you want a cheap SPR you'd be better off picking up an A&K SPR. Although if you're going to upgrade everything it shouldn't matter.
Just bought another glock 18, an extended barrel, hera carbine kit, peq-15.
argh.
[QUOTE=Taepodong-2;23810900]Last I heard they're shit. If you want a cheap SPR you'd be better off picking up an A&K SPR. Although if you're going to upgrade everything it shouldn't matter.[/QUOTE]
Huh. You'd think that their reputation for AKs would carry over to AR-10s, M16s, and M4s. The A&K versions haven't come back into stock either, and I don't know if they're going to ever again.
Ah, screw it, I think it'd be cheaper to get a new outer barrel, a longer rail system, a bunch of VN style mags and a new upper so I can change out the one on my M4 whenever I please.
[QUOTE=Identity;23810231]G&G.[/QUOTE]
Yeah my choices are some CYMA Aks, JG M4s, Classic Army G3 or G&G M14
I need urgent help :V Disassembling my 416 for the first time so I can install a new hopup bucking, I can't get the fucking body pin that connects the upper and lower receivers together, any ideas on how to get it out? It's a push pin, gun is an Echo1 614.
If you can't get them out, then try to apply more pressure, if that doesn't work use a punch and hammer, or if you don't have that, a screw driver and a hammer should do. The first time you take the pins out of most AEG's it's a bitch, it gets easier.
Be careful not to damage the paint, I made that mistake.
Yeah, the paint on the pin is all scratched up, I think I'll buy replacements at a later date, ones that you screw in.
As long as on one sees it's fine. I have a CA M15 and there is this pin above the trigger that is really tiny and really tight and I didn't have a punch at the time so I royally fucked my paint job taking it out.
I may need to get a new body soon but they're so expensive, mine is getting on in years. I also want an M16 barrel, nothing fancy just the longer handguard, inner barrel and whatever the inner barrel slips into. I can't find any though.
I wouldn't worry about a new CA M15 body. Mine is so beat up and marked up from all the times I've worked on it, you can even seem the pattern left from the jaws of a vise. If anything it makes it that much easier to identify that it's mine.
I can't get the barrel out of the hop up now, it won't even turn.
It appears I may have made a grave mistake. The patches I ordered for my Jericho loadout may be 4'' tall. Which is fucking stupid.
Got the hop up all sorted out, was actually fun :P
Has anyone ever seen a 14.5 inch DMR build? I'm thinking 14.5 M4 profile barrel, 12 inch DD rail (it's what the local shop has in stock) Firepig flashider, VFC PEQ-15, and some sort of short optic (want a Spectre DR, but the EBB replica isn't what I'm looking for and the real one is almost 2 grand) and then of course a few internal upgrades. My question is if anyone has seen a build like this, as I haven't yet and any pictures/comments would be nice.
[QUOTE=The Slick;23817357]Has anyone ever seen a 14.5 inch DMR build? I'm thinking 14.5 M4 profile barrel, 12 inch DD rail (it's what the local shop has in stock) Firepig flashider, VFC PEQ-15, and some sort of short optic (want a Spectre DR, but the EBB replica isn't what I'm looking for and the real one is almost 2 grand) and then of course a few internal upgrades. My question is if anyone has seen a build like this, as I haven't yet and any pictures/comments would be nice.[/QUOTE]
It's possible. My setup is actually close to it.
-CA M4 w/ 11" Larue RAS
-VFC PEQ-15
-JP Rifle Compensator (Got a DIY firepig flash hider, made from a film canister)
-4x ACOG w/ Red dot on top
[img]http://a.imageshack.us/img18/4494/dsc0169y.jpg[/img]
I can configure it to use the DIY Firepig, VN Mags, and some other parts if you want to see. Just let me know and I can have some more pictures up of it tomorrow.
As for internals, you're going to want a good 6.03mm or 6.01mm tightbore and a good hop-up bucking. I'd recommend Prometheus, by far the best tightbore I've used. Madbull ain't bad, but not the greatest either. Avoid Systema, worse than a stock barrel.
the long distance geeks gathered again and now the theory that 6.01 is slightly worse at longer distances then a 6.03 due to the friction in the barrel of the bb touching the barrel.
In my opinion, Stick with a trusty 6.01 cause i have no problems with mine
6.01, 6.03 either way you're fine.
[QUOTE=Pig;23815268]Yeah, the paint on the pin is all scratched up, I think I'll buy replacements at a later date, ones that you screw in.[/QUOTE]
guns look awesome all beat up, don't replace them silly
[QUOTE=xXEnder007Xx;23818819]It's possible. My setup is actually close to it.
-CA M4 w/ 11" Larue RAS
-VFC PEQ-15
-JP Rifle Compensator (Got a DIY firepig flash hider, made from a film canister)
-4x ACOG w/ Red dot on top
[img]http://a.imageshack.us/img18/4494/dsc0169y.jpg[/img]
I can configure it to use the DIY Firepig, VN Mags, and some other parts if you want to see. Just let me know and I can have some more pictures up of it tomorrow.
As for internals, you're going to want a good 6.03mm or 6.01mm tightbore and a good hop-up bucking. I'd recommend Prometheus, by far the best tightbore I've used. Madbull ain't bad, but not the greatest either. Avoid Systema, worse than a stock barrel.[/QUOTE]
Is that the CIRAS vest?
Yeah it's a Milspex Land CIRAS in CB.
Why the hell can't I see the item that's on the one hour sale on Airsoft world? Is it just me or what?
[QUOTE=Inafinus :3;23827003]Why the hell can't I see the item that's on the one hour sale on Airsoft world? Is it just me or what?[/QUOTE]
that normally means they've sold out of that item i think?
It was the minute the sale started.
thats pretty odd maybe the sites just fooked
For fucks sake.
Bought a brand new KWA G18C for a Hera Arms Carbine project (Hera Arms Carbine, 6.03 extended barrel, PEQ-15, TangoDown Stubby Grip and a Eotech XPS), got it home, put a little lube in, fired a mag on semi to test it in the garden, got in and the fucking selector switch pin has gone.
Emailed the shop I bought it from and can hopefully get a return (UK laws are pretty good for consumer protection). I know it's a problem with them, but I've never had any problems with the others I've owned from new because the grub screw is threadlocked in. Guess the assembly line worker "forgot".
What makes matters worse is this is for a game in 2 weeks and the ONLY shop in the WORLD that has the part is evike/airsoftpost, and we all know what their reputation is like.
What the hell, how did you find a brand new KWA glock?
Apparently Western Arms is making a GBB EBR that should be out in a couple months.
Sorry, you need to Log In to post a reply to this thread.