The official questions Thread v. NOT ANOTHER AR!!!11ONEONE!!! - General

Rosar, you don't have to spend so much on gear. Sure, you'll look awesome probably but you don't need so much to look like you at least know what you're doing. You're a MOLLE guy, but to prove a point, look at my loadout: [IMG]http://a2.sphotos.ak.fbcdn.net/hphotos-ak-snc6/184941_204719019554482_100000491570232_787194_110810_n.jpg[/IMG] Obviously, it isn't the best looking loadout ever, but I only paid like somewhere in the range of 120 for it all from head to toe, excluding the gun, and it'd be even cheaper if I wasn't overcharged for ALICE gear. Maybe that picture may help that new blond haired guy too? fuck automerge [editline]26th March 2011[/editline] and fuck you guys i know i'm short

You're short in the pants too.

[QUOTE=FPKawaii;28822937]You're short in the pants too.[/QUOTE] Worst joke EVER

I know a loadout only Deathmog can pull off.... [IMG]http://i298.photobucket.com/albums/mm257/lilpdean/OompaLoompa.png[/IMG]

Fuck yeah

Okay. Can someone recommend me a cheaper loadout, maybe? Or somewhere to get a cheaper one?

[QUOTE=Biscuit-Boy;28822704]A: Never. EVER. FUCKING EVER. Buy an electric blowback M4. Seriously who the fuck things that's cool? No offense to you of course but it's just so fucking lame. When I see someone with a little shit piece of plastic flailing around their ejection port I can't even decide whether I should laugh my ass off or grimace. Like, when starter level EBB guns started coming out, that's when I started hating mainstream airsoft. I'm so hipster but yeah. I'm exaggerating, but it really is a waste of money for a lame gimmick feature that is only going to be something else to break. The gun your friend is offering is decent but I personally don't trust their metalwork, generally cyma internals are good and their externals are fine really. They're both decent entry guns, the Cyma would be a little nicer, but I'd say go for whatever would make you happier, that's what airsoft is about. And both would work with .25g BBs, but your range will be diminished and you wont notice much of an accuracy increase. You'll be fine with .20g in any situation.[/QUOTE] Uh, CM's aren't plastic. Atleast not shitty plastic. I didn't think it was cool, it was just in the price range. Also, why are they entry level? I don't use .2's any more because they're inaccurate as FUCK on my M324S and G&G Xtreme .45.

the extra 30 dollars for the blowback on CMs isn't worth it

[QUOTE=xxncxx;28823902]Uh, CM's aren't plastic. Atleast not shitty plastic. I didn't think it was cool, it was just in the price range. Also, why are they entry level? I don't use .2's any more because their inaccurate as FUCK on my M324S and G&G Xtreme .45.[/QUOTE] It is plastic...

[QUOTE=W0w00t;28823939]the extra 30 dollars for the blowback on CMs isn't worth it[/QUOTE] I like my tighter barrel and spring release function :v:

Blowback that serves no other purpose other than look pretty kind of annoys me. But you know, it's supposed to be a replica

[QUOTE=FPKawaii;28822937]You're short in the pants too.[/QUOTE] You would know that, wouldnt you?

[QUOTE=xxncxx;28823902][b]their[/b] inaccurate[/QUOTE] So your basis for the accuracy of a BB is a piss-poor spring action rifle and a gas blowback pistol with the word "Xtreme" in the name? Sorry but that's the gun's fault, not the BB. I've seen plenty of UTG "M324"s and I can say unless it was a pet project that was heavily upgraded, it failed to impress, and as a rule of thumb you shouldn't expect to hit jack-shit with a GBB sidearm past 30-50 feet. They're for close quarters and backups, and even then it's really an excuse to have a cool toy or look the part (e.i. it's a novelty gun) Also I never said CM's were plastic EVEN THOUGH THEY ARE (polymer=plastic). I meant the electric blowback mechanism you warf. And if EBB was in the price range you do realize that without it it would be even less expensive?

On that whole list I posted earlier, think I should get rid of the scope and get something else then? I have like 6 bucks to buy something, i'm on a tight budget, but I want to spend it all on airsoft at least.

Buy some good BB's.

I have like 6 bucks, lol [editline]26th March 2011[/editline] plus I already have 2 bags of biovals sitting next to me

Is there any way to make the cummerbund smaller on this plate carrier? [url]http://www.airsoftgi.com/product_info.php?cPath=28_171&products_id=2692[/url] I have it and I have to put one velcro flap over the other so it fits properly, and then the big flap that holds it down comes up because it doesn't have enough velcro to hold it down. Sorry it's kinda confusing to explain via text.......

Is [url=http://www.airsoftgi.com/product_info.php?cPath=28_97&products_id=7443]this mask[/url] worth the money? It looks nice, and I've heard they're good.

[QUOTE=rosar0980;28825706]Is [url=http://www.airsoftgi.com/product_info.php?cPath=28_97&products_id=7443]this mask[/url] worth the money? It looks nice, and I've heard they're good.[/QUOTE] I'll rip off your head and shit down your neck if you buy that $130 for what is essentially a paintball mask which generally cost $40 tops.

[QUOTE=Biscuit-Boy;28824409]So your basis for the accuracy of a BB is a piss-poor spring action rifle and a gas blowback pistol with the word "Xtreme" in the name? Sorry but that's the gun's fault, not the BB. I've seen plenty of UTG "M324"s and I can say unless it was a pet project that was heavily upgraded, it failed to impress, and as a rule of thumb you shouldn't expect to hit jack-shit with a GBB sidearm past 30-50 feet. They're for close quarters and backups, and even then it's really an excuse to have a cool toy or look the part (e.i. it's a novelty gun) Also I never said CM's were plastic EVEN THOUGH THEY ARE (polymer=plastic). I meant the electric blowback mechanism you warf. And if EBB was in the price range you do realize that without it it would be even less expensive?[/QUOTE] I based it off of the BB because whenever I shot a .2 it went all over the place, I use a .25 and it goes straight. Do you see the pattern, because I do. Same with the pistol. Also, I can't help that its called an Xtreme .45, what do you want me to call it? G&G Gas pistol? Also, I don't shoot past 30-50 feet if that's what your thinking. Sorry I didn't realize you were talking about the blowback mechanism. Fault on my part.

I'm going to be honest. I use .2 and they literally fucking go all over the place and I'm lucky to get hits. I need to switch over to something heavier but I still have like eight or nine bags of the stuff to burn through.

[QUOTE=xxncxx;28825907]I based it off of the BB because whenever I shot a .2 it went all over the place, I use a .25 and it goes straight. Do you see the pattern, because I do. Same with the pistol. Also, I can't help that its called an Xtreme .45, what do you want me to call it? G&G Gas pistol? Also, I don't shoot past 30-50 feet if that's what your thinking. Sorry I didn't realize you were talking about the blowback mechanism. Fault on my part.[/QUOTE] Both you're guns shoot like, 500 fps, of course .2s are going to fly everywhere.

[QUOTE=FPKawaii;28825972]Both you're guns shoot like, 500 fps, of course .2s are going to fly everywhere.[/QUOTE] Well I know this, but it SEEMS like Biscuit doesn't.

[QUOTE=xxncxx;28825995]Well I know this, but it SEEMS like Biscuit doesn't.[/QUOTE] You really don't seem to know.

[QUOTE=Ivebo;28825761]I'll rip off your head and shit down your neck if you buy that $130 for what is essentially a paintball mask which generally cost $40 tops.[/QUOTE] I want it for the nice look, tbh. Is there somewhere I can find one cheaper?

[QUOTE=rosar0980;28826034]I want it for the nice look, tbh. Is there somewhere I can find one cheaper?[/QUOTE] lol 130 dollars for looks [editline]26th March 2011[/editline] they're ugly anyways

[QUOTE=xxncxx;28825995]Well I know this, but it SEEMS like Biscuit doesn't.[/QUOTE] Just curious, how long have you been playing airsoft?

[QUOTE=FPKawaii;28826024]You really don't seem to know.[/QUOTE] Why's that? I bought heavier BB's because like I said, .2's are inaccurate for me whereas the .25's are fine. [editline]26th March 2011[/editline] [QUOTE=Biscuit-Boy;28826201]Just curious, how long have you been playing airsoft?[/QUOTE] 2-3 years. It's been like a few months since I discovered this section.

[QUOTE=MedicmanV500;28825555]Is there any way to make the cummerbund smaller on this plate carrier? [url]http://www.airsoftgi.com/product_info.php?cPath=28_171&products_id=2692[/url] I have it and I have to put one velcro flap over the other so it fits properly, and then the big flap that holds it down comes up because it doesn't have enough velcro to hold it down. Sorry it's kinda confusing to explain via text.......[/QUOTE] Yeah, if you undo the velcro from both sides of the cummerbund at the front, and then pull the whole cummerbund out of the back of the vest, there may be a way to tighten it. I had an Eagle Plate Carrier before and the cummerbund was tied together with paracord at the back, which left a few inches between either end of the elastic on the end, so I replaced it with zip ties and it made it much tighter. Yours may not be exactly the same but there may be some way to do something similar. [editline]26th March 2011[/editline] [QUOTE=xxncxx;28826203]Why's that? I bought heavier BB's because like I said, .2's are inaccurate for me whereas the .25's are fine. [editline]26th March 2011[/editline] 2-3 years. It's been like a few months since I discovered this section.[/QUOTE] Okay. So I've been playing for 6 and even if you're right you're not going to convince me. I've used nothing but .20g and never had a problem with any gun unless that gun happened to suck. Especially in AEGs, I thought .20g accuracy was great and never bothered using .25+ in anything but my Aw.338. If .25g works for you, go for it, I'm not really bothered. Either way the M324 sucks lol.

God dammit -snip-