The official questions Thread v. NOT ANOTHER AR!!!11ONEONE!!! - General

[QUOTE=Timebomb575;28902071]3-4 HMMWV sized vehicles on 10 acres would, like I said, either kill the shit out of infantry, or, if you have any AT units, never survive more than 5 minutes. You need a hell of a lot of space to run vehicles, mainly since they need escape paths/multiple approaches to key areas/open areas to be safe from AT. Plus where are you going to get HMMWVs?[/QUOTE] Well, The Nat'l Guard does lend them out in Florida for airsoft events. I was talking more along the lines of SUV's though, my father owns a few. [editline]31st March 2011[/editline] Anyways, so if 10 acres wouldn't be enough, what do you think would be? 30-40?

[QUOTE=Bomber9900;28902141]Well, The Nat'l Guard does lend them out in Florida for airsoft events. I was talking more along the lines of SUV's though, my father owns a few. [editline]31st March 2011[/editline] Anyways, so if 10 acres wouldn't be enough, what do you think would be? 30-40?[/QUOTE] 30-40 with a good amount of roads would do it. Though we have 90 and I only occasionally have trouble hunting down vehicles :v:

[QUOTE=Timebomb575;28902741]30-40 with a good amount of roads would do it. Though we have 90 and I only occasionally have trouble hunting down vehicles :v:[/QUOTE] I've been doing some land hunting here in Florida, and its about 1k an acre, which isn't that bad of a deal if you have the money for it. HMMWV's are expensive though, theres a factory out in Maine thats been refurbishing hundreds of them and selling them. [url]http://www.army4x4.com/hummers.shtml[/url] [editline]31st March 2011[/editline] Not sure the prices though and I don't want to contact them and waste there time unless I'm sure I can afford it.

[QUOTE=Bomber9900;28902795]I've been doing some land hunting here in Florida, and its about 1k an acre, which isn't that bad of a deal if you have the money for it. HMMWV's are expensive though, theres a factory out in Maine thats been refurbishing hundreds of them and selling them. [url]http://www.army4x4.com/hummers.shtml[/url] [editline]31st March 2011[/editline] Not sure the prices though and I don't want to contact them and waste there time unless I'm sure I can afford it.[/QUOTE] buying for road use k, i'll park in the teacher's lot and be like "come at me, bro" when they tell me to move it

[QUOTE=DarkSamus;28902902]buying for road use k, i'll park in the teacher's lot and be like "come at me, bro" when they tell me to move it[/QUOTE] It's a hell of a bumpy ride man, even on paved streets. HMMWV's are some of the most uncomfortable vehicles you can ride in.

[QUOTE=Mbbird;28843612]Uhh, Russia definitely doesn't use this relic anymore. [img_thumb]http://upload.wikimedia.org/wikipedia/commons/e/ea/Gasm.jpg[/img_thumb][/QUOTE] Okay, this is really late but you're an ass. I referred to the Russian design, not specifically listing Russia as one of the ones who still use GP-5. There are a shit-ton of countries in the region that do however. Georgia for example uses the GP-5, PMG-2 and PBF masks among others. [img]http://resources3.news.com.au/images/2007/11/08/va1237276376162/Georgia-police-5742273.jpg[/img] Why does it seem like everyone gets offended the minute I mention Russia negatively?

[QUOTE=Bomber9900;28902919]It's a hell of a bumpy ride man, even on paved streets. HMMWV's are some of the most uncomfortable vehicles you can ride in.[/QUOTE] could give less of a fuck if im driving around an HMMWV

[quote=hatredviral;28900660]how can i make the wood on this darker and less orange? [img_thumb]http://dl.dropbox.com/u/9988278/img_0292.jpeg[/img_thumb][/quote] fuck aughagaadahsdhgdgaduagdua

[QUOTE=DarkSamus;28903112]could give less of a fuck if im driving around an HMMWV[/QUOTE] can we have matching HMMWV's with radio comms?

[QUOTE=Bomber9900;28903141]can we have matching HMMWV's with radio comms?[/QUOTE] yes but only if my callsign can be red leader

yeah but red leader is gay, be like Assassin 2 and i can be Assassin Actual

[QUOTE=DarkSamus;28903164]yes but only if my callsign can be red leader[/QUOTE] mine will be furfaggot

[QUOTE=Bomber9900;28903187]yeah but red leader is gay, be like Assassin 2 and i can be Assassin Actual[/QUOTE] we can be like.. a brotherhood [img]http://bulk2.destructoid.com/ul/190603-Assassins-Creed-Brotherhood.jpg[/img]

yeah except with kevlar and guns

how about hitman one [editline]30th March 2011[/editline] or oscar mike

[QUOTE=HatredViral;28900660]How can I make the wood on this darker and less orange? [img_thumb]http://dl.dropbox.com/u/9988278/IMG_0292.jpeg[/img_thumb][/QUOTE] Jesus fucking asspirates.

[QUOTE=W0w00t;28904620]how about hitman one [editline]30th March 2011[/editline] or oscar mike[/QUOTE] hitman two or hitman two one

Well the G3 I was gonna order went out of stock so I got an SRC M16 instead. It's here now and it's a beast, although the handguard feels a little flimsy. My question is this though. When I'm done with my battery say after a skirmish, should I empty the battery completely of its charge? Because I'd have no idea how much I'd need to recharge it again and I'm not sure if the light turning green on the charger is quite reliable enough.

[QUOTE=tommyc225;28913291]Well the G3 I was gonna order went out of stock so I got an SRC M16 instead. It's here now and it's a beast, although the handguard feels a little flimsy. My question is this though. When I'm done with my battery say after a skirmish, should I empty the battery completely of its charge? Because I'd have no idea how much I'd need to recharge it again and I'm not sure if the light turning green on the charger is quite reliable enough.[/QUOTE] Depends upon the type of battery. If memory serves, you only need to completely deplete Nickel-Cadmium batteries before recharging. Any other battery type you can just slap on the charger.

It's a 3700 MaH Ni-MH. I guess its alright then

Where's the cheapest place to buy replica SAPI plates?

[QUOTE=MedicmanV500;28918032]Where's the cheapest place to buy replica SAPI plates?[/QUOTE] make it yourself

[QUOTE=MedicmanV500;28918032]Where's the cheapest place to buy replica SAPI plates?[/QUOTE] Cardboard! glue layers of it together for more strength.

[QUOTE=DarkSamus;28918388]Cardboard! glue layers of it together for more strength.[/QUOTE] Gotta get some more cardboard... I have some in there right now but it's not thick enough. I just figured buying replica SAPI plates would be easier and look better/retain shape better.

[img]http://maxairsoft.eu/imgcache/430cbd324ce94cbdce54f31285640d21.png[/img] Hey guys is this swiss arms rail light any good?

Any way I could make my Condor MICH 2000 replica fit better? It's too small on me, my hat size is like L-XL. I tried rearranging the pads but it still does not fit... if not I wasted like $35 or so on a paperweight. [editline]1st April 2011[/editline] Also do any companies make a replica MICH 2000 in a larger size perhaps? I need a MICH 2000 for my loadout. Or do I have to shell out for a real one? I know I already asked this but no one responded.

[QUOTE=MedicmanV500;28932041]Any way I could make my Condor MICH 2000 replica fit better? It's too small on me, my hat size is like L-XL. I tried rearranging the pads but it still does not fit... if not I wasted like $35 or so on a paperweight. [editline]1st April 2011[/editline] Also do any companies make a replica MICH 2000 in a larger size perhaps? I need a MICH 2000 for my loadout. Or do I have to shell out for a real one? I know I already asked this but no one responded.[/QUOTE] Try adjusting the chin straps. My Marine PASGT was a little tight before I loosened up the straps a bit.

[QUOTE=MedicmanV500;28932041]Any way I could make my Condor MICH 2000 replica fit better? It's too small on me, my hat size is like L-XL. I tried rearranging the pads but it still does not fit... if not I wasted like $35 or so on a paperweight. [editline]1st April 2011[/editline] Also do any companies make a replica MICH 2000 in a larger size perhaps? I need a MICH 2000 for my loadout. Or do I have to shell out for a real one? I know I already asked this but no one responded.[/QUOTE] To my knowledge, helmets are a one-size-fits-all kinda deal. If it don't fit your head, tough nuts. I have the same issue, and I decided to just look badass and wear an ASGI baseball cap.

[QUOTE=Identity;28932359]Try adjusting the chin straps. My Marine PASGT was a little tight before I loosened up the straps a bit.[/QUOTE] It's not even that, it just looks too small/sits too high on my head. [editline]1st April 2011[/editline] [QUOTE=rosar0980;28932369]To my knowledge, helmets are a one-size-fits-all kinda deal. If it don't fit your head, tough nuts. I have the same issue, and I decided to just look badass and wear an ASGI baseball cap.[/QUOTE] I guess I need a real MICH 2000 then cuz they come in different sizes. [editline]1st April 2011[/editline] Found a real steel MSA MICH 2000 at a local surplus shop. Includes ACUPAT cover and NVG mount with all the padding and chin strap. It's $100. I think I might buy it.

If I had a surplus store with those prices near me I'd take literally all the money I get and buy stuff there. I wouldn't even buy food.