Yeah they were the paratroopers
[url]http://en.wikipedia.org/wiki/Fallschirmj%C3%A4ger[/url]
[QUOTE=CubeManv2;17235978]Yeah they were the paratroopers
[url]http://en.wikipedia.org/wiki/Fallschirmj%C3%A4ger[/url][/QUOTE]
Yeah, I know lol. You acted like they were separate from the Wehrmact :P
oh sorry didn't mean it like that
[media]http://www.youtube.com/watch?v=Tjpva-ueEEE[/media]
That would be awsome to see in a airsoft game, I would make one but i'm short a couple thousand.
[QUOTE=Zeroarmorclo;17238724][media]http://www.youtube.com/watch?v=Tjpva-ueEEE[/media]
That would be awsome to see in a airsoft game, I would make one but i'm short a couple thousand.[/QUOTE]
Well that would not include the Mounted 50 cal minigun if i made one, i would also make sure that my barrel could fire a bag of bbs all at once.
[QUOTE=Swamphunter;17234033]First off, the motor has its issues. When you fire, all it does is make whirring sounds, not the firing sounds you'd normally hear.
And the battery wires around the front end are starting to fall apart. I've done all I can with electrical tape on the front ends, but I'm afraid that there might be some wire tearing inside the body as well.
I have a co-worker that has a CA... he says it's pretty good.
I've been eyeballing ASGI's G4-A3 as well. I've heard G&G are pretty good, save for the low FPS.[/QUOTE]
Sounds like either the pinion gear is stripped or the gear it connects to is, had it happen to my SCAR. Cheap fix, AEX replaced mine for free (but then again they know me). The wire shouldn't be torn on the inside. Out of all the gearboxes I've worked on I've never seen one that's torn on the inside, only the wires on the outside. With some sauder and shrink wrap you could fit that up. Or buy a new wiring set.
But long term a new gun is the way to go. The G&G's are also a good choice, completely forgot about those. FPS shouldn't be a problem, it can always be upgraded. Even then you can still do fine with a 300fps gun, most of my guns have been shooting around 300-330fps for the last 6 months and I do fine.
or throw out 180$ for the asgi custom g4 or what ever, it is the combat machine m4 with ris and a wired to the back crane stock so you dont have to have a battery box.
:smug:
Hey whats the inner barrel length for an Ak-74u? Can't find that info anywhere.
[QUOTE=xXEnder007Xx;17241008]But long term a new gun is the way to go. The G&G's are also a good choice, completely forgot about those. FPS shouldn't be a problem, it can always be upgraded. Even then you can still do fine with a 300fps gun, most of my guns have been shooting around 300-330fps for the last 6 months and I do fine.[/QUOTE]
Cool. When my next paycheck comes in, I'll order the G4-A3. Those flip-up sights are all kinds of sexy. :sax:
Thanks y'all for the info!
[quote=wolfman;17246458]hey whats the inner barrel length for an ak-74u? Can't find that info anywhere.[/quote]
270-280
[QUOTE=CubeManv2;17248082]270-280[/QUOTE]
Thanks a bunch man
Just got my CQB Master Hi-Capa today! :D It shoots very nicely, has a hard kick, but the slide doesn't seem to lock back on the last shot. Anyone got any ideas on why? Might be just the lever thing.
[QUOTE=Super_Toast;17250465]Just got my CQB Master Hi-Capa today! :D It shoots very nicely, has a hard kick, but the slide doesn't seem to lock back on the last shot. Anyone got any ideas on why? Might be just the lever thing.[/QUOTE]
Are you holding the slide release (lever thing) with your thumb as you fire? I used to do that accidentally.
I'd like to get a bandoleer for M14 mags. Anyone know of any decent ones?
While I'm at it, I'm interested in some CYMA M14 midcaps as well.
[QUOTE=Super_Toast;17250465]Just got my CQB Master Hi-Capa today! :D It shoots very nicely, has a hard kick, but the slide doesn't seem to lock back on the last shot. Anyone got any ideas on why? Might be just the lever thing.[/QUOTE]
Could be a loose screw on the bottom of the slide causing some friction. Just strip it and tighten them if that's the case.
[QUOTE=Timebomb757;17250512]Are you holding the slide release (lever thing) with your thumb as you fire? I used to do that accidentally.[/QUOTE]
Nope. Not even touching it.
[QUOTE=capgun;17251484]I'd like to get a bandoleer for M14 mags. Anyone know of any decent ones?
While I'm at it, I'm interested in some CYMA M14 midcaps as well.[/QUOTE]
Look for King Arms M14 Micap box sets, they're only like $25 at AEX.
Well I left the hammer back while taking the pin that holds the mag well on, and the thing in the back of the handle sprung down and this little metal silver thing came out. I put it back without the silver thing and now the trigger doesn't move. Please help, I don't know how to fix this! Will I be able to send it back? I'm really sad, my gun is broken and it's only my 2nd day having it. :smith:
Nevermind I fixed it.
Oh lol. ^
I'm building probibly one of the most expincive airsoft loadouts ever.
I am going to turn a caw revolver grenade launcher and and a bunch of abs pipe and crap into a large arm mounted "shotgun" (from the caw) and rocket launcher (nerf rockets, abs pipe) but I am facing problems with how it will work.
I want my arm in the middle on some form of a single hand trigger for both weapons because it is arm mounted. and I will have to carry compressed air or co2 or something for the nerf rockets. I was thinking just take abs pipe and build a back mounted container and use compressed air with a psi valve and a "bike tube valve" but carry it in a large pack form like three or four pipes wide. but how do I connect that to the arm mounted cannon? I was thinking some sort of tube but I don't know what kind. and I have no idea how to wire a trigger to only release so much gas at once. help is appriciated, thanks. I also plan to mount the caw right side up on the rails so I can remove it easily.
^
good luck. why would you want that anyway? thats kind of useless.
My loadout.
take at look at these.
I do both sports so I know I can trust the site for my balistic protection.
[code]http://www.denniskirk.com/jsp/product_catalog/Product.jsp?skuId=3410314L&store=Main&catId=&productId=p3410314&leafCatId=&mmyId=
http://www.qm-supply.com/zenstore/index.php?main_page=product_info&cPath=3&products_id=54
http://www.denniskirk.com/jsp/product_catalog/Product.jsp?skuId=356975128&store=Main&catId=&productId=prod2670286&leafCatId=&mmyId=
http://www.denniskirk.com/jsp/product_catalog/Product.jsp?skuId=&store=Main&catId=&productId=p3409503&leafCatId=&mmyId=
http://airsoftoutletnw.com/index.php/Airsoft-Tactical-Gear/Face/Elbow/Knee-Protection/Condor-MICH-2002-Helmet-Replica-Black.html
[/code]
I also will buy a tinted shield for the gasmask.
I really look forward to this loadout, it will be my second.
I plan for a heavyer armor and stuff for the arm cannon and all and this lighter loadout for a aug a3.
but I will use parts from both for each.
What is this loadout even going to be?
Generic space age loadout #3352
Just wait for me to get about 1000$ I'l get it done and post pics
waffen SS loadout kooler
ww2 =/= space age
To be honest, it doesn't seem like it will look good. More like a random collection of gear you got at a Sporting Goods store because you couldn't fork out enough an actual MOLLE vest and camo.
I don't see why you'd spend $1000 on something that may look completely awful.
I've seen guys with a similar, motorcycle jacket at a Terminator Op we had a while back. Not the greatest looking in my opinion, sort of retarded looking.
Honestly, if you wanted arm mounted cannons and all that shit, it would be better to have a powered exoskeleton. Then you could hold a shitload of stuff and not even notice the weight. But those costs a lot and we don't exactly got small power supplies either yet for something like that.
An easier project would be a simple arm mounted M203. Just slid it open, drop your shell in and load a rocket and you're done. Not only that but you should be able to use a rifle without it getting in your way too much.
mount it to your forearm or something (A 203). Velcro straps or even tape.
Sorry, you need to Log In to post a reply to this thread.
