• Post your airsoft loadouts V2
    5,000 replies, posted
I'll get in my USMC Recon Loadout tommorow. I'm going to phase it into a real USMC Sniper loadout later down the line
[QUOTE=DarkSamus;23349036]hes a ninj-- samurai[/QUOTE] A Ninjuarai?
[QUOTE=Fenriswolf;23345195]Noez I don'tz can you plox tell me who wantz?[/QUOTE] I do.
[URL=http://img176.imageshack.us/i/africaharborsoldierrk95.jpg/][IMG]http://img176.imageshack.us/img176/9455/africaharborsoldierrk95.jpg[/IMG][/URL] Uploaded with [URL=http://imageshack.us]ImageShack.us[/URL] Anyone care to tell me what gear this loadout is compromised of?
Looks like the vest is a modified version of this: [url]http://www.airsoftgi.com/product_info.php?cPath=28_96&products_id=4922[/url] Everything else just looks like generic gear and some BDU designed specifically for the game.
Alright, thanks. I love helmet+goggles+balaclava. But I think I'd have to do it in Winter, as it's way too hot in the Summer here.
That's a German flak jacket, just in tan, with a MOLLE vest over it, also in tan. You could make a BCB2 loadout if you tried hard enough. [editline]10:43PM[/editline] Also, the camo looks Desert Digital, used by the Marines.
Oh right, I didn't see the flak jacket. With the flak jacket that would be [I]extremely[/I] hot.
[QUOTE=Identity;23370100] Also, the camo looks Desert Digital, used by the Marines.[/QUOTE] The camo looks kinda like it, but the actual BDU is kinda weird, with those almost sweater-type cuffs at the wrist... I'm not sure that there's anything quite like it IRL
It looks like a bdu with a commando sweater under it. If you want something not so ungodly hot I would take some black socks, cut the ends off, and put them on your exposed arms. [img]http://filesmelt.com/dl/HPIM1531.JPG[/img] Here's an example.
Vest is the old PASGT Body armor with and addition of a lightweight MOLLE vest. Lots of companies make MOLLE vests similar to this. [IMG]http://www.special-warfare.net/data_base/303_protective/armor_04/pasgt_08.jpg[/IMG] [IMG]http://ep.yimg.com/ca/I/policestuff_2111_100632814[/IMG]
:ms:
That loadout was not very well thought out...the devs dressed the poor guy for Alaska. Ah, so I bought a MARPAT BDU and Alta kneepads today for Jericho on Saturday :smile: Loving both. Vegetato was kind of part desert camo, party woodland, and I wanted to make sure there was no confusion on Saturday.
Devs tend to do that for any military game. v:v:v
Sine I didn't get an answer in the questions thread, are the BDUs from Ehobby any good? The Type 07 BDU is what I want specifically. [url]http://shop.ehobbyasia.com/combat-gears/clothing-bdu/bdu-uniform/ea-gear-bdu-uniform-chinese-pla-2007-ver.html[/url]
[QUOTE=Taepodong-2;23372774]Sine I didn't get an answer in the questions thread, are the BDUs from Ehobby any good? The Type 07 BDU is what I want specifically. [url]http://shop.ehobbyasia.com/combat-gears/clothing-bdu/bdu-uniform/ea-gear-bdu-uniform-chinese-pla-2007-ver.html[/url][/QUOTE] I doubt many people here have any interest in PLA gear.
[QUOTE=Taepodong-2;23372774]Sine I didn't get an answer in the questions thread, are the BDUs from Ehobby any good? The Type 07 BDU is what I want specifically. [URL]http://shop.ehobbyasia.com/combat-gears/clothing-bdu/bdu-uniform/ea-gear-bdu-uniform-chinese-pla-2007-ver.html[/URL][/QUOTE] Can't say, nor do I think anyone else here really can. I don't know of anyone with that type of uniform. Unless you can find a decent review on another forum such as Arniesairsoft, I'd save your money. $80 for something you're not sure on the quality is an awful lot, about the price of a standard uniform set made by Proper or Tru Spec.
While I really, really, want that Pantac SPC, it's extremely expensive, so I might just roll with an Flyye IBA. Which, apparently, is acceptable for modern Marine loadouts because they are given those when stateside and not overseas. And Ender, I knew it was PASGT body armor! (Or some variant), I also think that MOLLE vest they use might be the Canadian variant of the FLC. Edit: Wait, are you talking about the BFBC dude? [editline]05:50AM[/editline] [QUOTE=Kman1;23369585][URL=http://img176.imageshack.us/i/africaharborsoldierrk95.jpg/][IMG]http://img176.imageshack.us/img176/9455/africaharborsoldierrk95.jpg[/IMG][/URL] Uploaded with [URL=http://imageshack.us]ImageShack.us[/URL] Anyone care to tell me what gear this loadout is compromised of?[/QUOTE] The helmet, for some reason resembles the Marine LWH (Hard to find) with the PASGT NVG Bracket and the retention strap attached. The body armor is some sort of PASGT body armor in tan with an OD/Woodland FLC over it. The camo is so jacked up I couldn't make out anything similar to it. The kneepads are black Alta's/Hatch. The pouches resemble SDS MOLLE II pouches, a lot of 40mm ones and only 2 M16 mag pouches.
Screw the Ehobby BDU, I found a real PLA issue BDU. It says that the buttons have "PLA" written on them and none of the knock offs have that, only the real issue ones. Kind of like the eagle, globe and anchor in MARPAT. It's cheaper than the knock off too. [url]http://www.royaltigergear.com/product_info.php?cPath=30_21_23&products_id=396&osCsid=9c80cbd2ea5c90d79821fbe2ba572f58[/url]
-snip-
vest is a FLC (fighting load carrier) [editline]07:05AM[/editline] you see cos i own one also codemonkey fapped for me it was lol1!!
[QUOTE=Leon;23374304]vest is a FLC (fighting load carrier) [editline]07:05AM[/editline] you see cos i own one also codemonkey fapped for me it was lol1!![/QUOTE] I thought you were going to stop posting like this. :frown:
[QUOTE=DarkSamus;23374435]I thought you were going to stop posting like this. :frown:[/QUOTE] lo,l u r gay
[QUOTE=Kman1;23369585][URL="http://img176.imageshack.us/i/africaharborsoldierrk95.jpg/"][IMG]http://img176.imageshack.us/img176/9455/africaharborsoldierrk95.jpg[/IMG][/URL] Uploaded with [URL="http://imageshack.us"]ImageShack.us[/URL] Anyone care to tell me what gear this loadout is compromised of?[/QUOTE] Phantom fore-grip
Massive clipping too. Just look at that trigger finger.
its a photoshop, guys. A very crappy one at that too.
Fun to mock it though. I've seen better done with paint.
[QUOTE=Identity;23370100] You could make a BCB2 loadout if you tried hard enough. [/QUOTE] That's sorta my goal.
Well you know what the loadout is. I'd substitute the BDU's for Marine Core Desert Digital though, then the PSAGT flak jacket, and MOLLE vest, in tan, and you know the rest. Seems like it could be easier to find now.
[QUOTE=Mbbird;23371926]That loadout was not very well thought out...the devs dressed the poor guy for Alaska. [/QUOTE] Ironically, a good bit of the game takes place in Alaska. >_< But thanks to everyone for the help :) I've saved all the suggestions, and once I get my new gun, I'll start putting this all together. I really like the sock idea, I just tried it and it looked pretty good. One last thing, what kind of goggles are those (that are mirrored) and what do I do for a balaclava like that?
Sorry, you need to Log In to post a reply to this thread.