Airsoft Chat Thread V.7 Shimano gears are the best
9,934 replies, posted
[QUOTE=JoonazL;36338545]I don't care about anything else but we need a MP443 for those russia loadouts[/QUOTE]
Despite the fact that it's actually rarely used as only officers are issued sidearms and most Spetsnaz units use Glocks. Doesn't mean I wouldn't buy one though because they're cool.
[QUOTE=Taepodong-2;36339175]Despite the fact that it's actually rarely used as only officers are issued sidearms and most Spetsnaz units use Glocks. Doesn't mean I wouldn't buy one though because they're cool.[/QUOTE]
getting a glock now
[url]http://www.illinoisairsoft.com/index.php?topic=16298.0[/url]
Here's the list on Illinois.
I like how as soon as i get my CVC helmet and discover some parts are wrecked and could do with replacing, all of those parts i saw on Ebay forever when i was searching for helmets are no longer there.
The lining is coming apart and shedding bits everywhere so it needs replacing, and the front is missing 2 straps that hold the shell on, so i need to fix those.
And since the helmet's almost 30 years old (from what i can tell, it's at least 21 years old since it's from GW1) i'm not gonna wreck any of the original parts, just swapping them out for newer and less broken ones.
Did someone say skill tabs?
[t]http://i.imgur.com/Ru65q.png[/t]
[SUB]Shitposter, Glod Menber, Facepuncher, Gherkin, Lurk-N-Rate (What me and Captain Armadillo do)[/SUB]
Codemonkey or someone else with money would need to get these made because I spent all my money on [del]weed[/del] airsoft shit.
I'll talk gold member.
ill take a shit poster one
Hey, change it to Glod Member.
[QUOTE====;36342364]
Codemonkey or someone else with money would need to get these made because I spent all my money on [del]weed[/del] airsoft shit.[/QUOTE]
do this codemoney do that codemoney oh you have so much money codemoney
Yeah? Well FUCK YOU
[QUOTE=CodeMonkey3;36343624]do this codemoney do that codemoney oh you have so much money codemoney
Yeah? Well FUCK YOU[/QUOTE]
Roll some nickels and buy me a title.
how precisely does one roll nickles into a digital medium thank you.
fuck you thats how
i roll nikcles and sm0ke them
[QUOTE=CodeMonkey3;36343984]fuck you thats how[/QUOTE]
Still waiting on my title.
I want one that says IMDABES.
Codemonkey AKA IFAP Daddy.
Need one for Tankman....Clearance
Dumbfuck
Should I post my copy pasta in more forums tonight? Michigan doesn't seem to like it and ASF cannot read as usual.
if no one here does it, I'll go on Red-Alliance tomorrow and post it
Again, no dosh for the fper and the lurk'n'nrate.
[QUOTE=Kill001;36351563]if no one here does it, I'll go on Red-Alliance tomorrow and post it[/QUOTE]
I can do that, I lurk there all the time lol
I ordered my plate carrier. Got tired of waiting for the place i was gonna order from to get Coyote Tan ones back in stock and noticed they had 1 ranger green one, so i went for it.
Now i just need to begin the process of buying lots and lots of mag pouches.
Oh yeah, so I figured out the deal behind WE's quality.
So on there new molds like the Glock and XDM, they're putting a lot of effort into making them, resulting in decent quality products, but the issue is that they're still going to be using the original molds for their old pistols.
So basically, any new product that WE puts out is quite likely to be good/decent, but anything that was designed a while ago is likely to continue sucking for a long time.
But the things that affect performance don't have to do with molds, injection molding is only used to make the frames/bodies/slides, the actual internal pieces are manufactured elsewhere and assembled by them. Not saying you're wrong that they're making better guns, but changes in molds aren't the reason, it's changes in design and parts used. Unless you're talking exclusively about durability and external quality, because those would be dependent on the molds.
My WE XDm is of better quality than the TM.
Myth busted.
[QUOTE=catbarf;36356499]But the things that affect performance don't have to do with molds, injection molding is only used to make the frames/bodies/slides, the actual internal pieces are manufactured elsewhere and assembled by them. Not saying you're wrong that they're making better guns, but changes in molds aren't the reason, it's changes in design and parts used. Unless you're talking exclusively about durability and external quality, because those would be dependent on the molds.[/QUOTE]
The metal parts are molded too, they aren't cnc'd or anything like that.
[QUOTE=notrabies;36356749]The metal parts are molded too, they aren't cnc'd or anything like that.[/QUOTE]
Are you sure they're molded and not lathed or CNC'd, and that they do the molding on-site? Injection molding equipment is really, really expensive, a lot of firms use contracted manufacturers to produce them.
Scaar, the guy from AATV declared that he's done with airsoft.
FFFFFFFUUUUUUUUUCK
The guy with the shitload of old, awesome guns?
What's he gonna do with them all?
felix buy all his WAs
Sorry, you need to Log In to post a reply to this thread.