• Airsoft Chat Thread V.7 Shimano gears are the best
    9,934 replies, posted
[QUOTE=cardfan212;37128542]I believe that is a piece for the upper handguard, on the back of the gas tube. [editline]7th August 2012[/editline] [t]https://dl.dropbox.com/u/34238144/ak piece 1.jpg[/t] [t]https://dl.dropbox.com/u/34238144/ak piece 2.jpg[/t] [t]https://dl.dropbox.com/u/34238144/ak piece 3.jpg[/t] Yeah, it is.[/QUOTE] Thanks, I've put that piece on. I took some photos of all the flaws so far, they're not that bad, the grip is wobbly without the screw in place so I'll see if some super glue can help. [t]http://niggaupload.com/images/g6AY.jpg[/t][t]http://niggaupload.com/images/vic1j.jpg[/t] Front sight is off, any suggestions on how I should go about this one? I see two tight pins that keep it attached I think so pushing those out could be a possibility. [t]http://niggaupload.com/images/yZa7i.jpg[/t][t]http://niggaupload.com/images/mVH0R.jpg[/t] Mysterious piece of plastic inside the box, I don't see any marks on it that would show if it had snapped off of something. [t]http://niggaupload.com/images/bJqN6.jpg[/t][t]http://niggaupload.com/images/9xn3J.jpg[/t] This is the chipped piece in the grip I've been talking about. [t]http://niggaupload.com/images/YpaLb.jpg[/t] Skeleton stock has a little bent spot but when I find some paracord I'll be wrapping it up. The gun isn't comfortable at all when I fire with it folded so if the cord prevents it from snapping in on the side I won't be too worried, I'll still be able to fold it to fit in smaller bags. [t]http://niggaupload.com/images/BfPL6.jpg[/t] Lastly, the cheap sling. I'll just use the single point bungee sling I'm getting in from ASGI in a few days, but I thought I'd share with you what my boneyard gun turned out to be. I might just email Evike just so they know what happened, the extra $5 I paid isn't too big of a deal because I fared pretty well for $80. The metal body feels rough and a tad cheap but it attracts magnets, parts like the bolt carrier and iron sights don't attract magnets. Since there's too much black on this gun, I'll probably do what [URL="http://facepunch.com/showthread.php?t=1089166&p=36554570&viewfull=1#post36554570"]jomt did[/URL] and paint the handguard.
for the front [U]sight[/U] you can probably jsut take a rubber mallet and lightly tap the [U]sight[/U] back into place. or anything similar to that. that bit of plastic honestly doesnt look like it goes to anything. the grip needs to be replaced, cant super glue that. you always replace the sling anyways. the texture on the metal is actually more realistic than a smooth finish, i think. and its steel, which is good. since it attracts magnets. honestly, just as good or better than a cm035.
aks dont need sights [editline]7th August 2012[/editline] if allah wills for you to hit your target, then you will hit!!
[QUOTE=Fish Muffin;37131836]for the front [U]sight[/U] you can probably jsut take a rubber mallet and lightly tap the [U]sight[/U] back into place. or anything similar to that. that bit of plastic honestly doesnt look like it goes to anything. the grip needs to be replaced, cant super glue that. you always replace the sling anyways. the texture on the metal is actually more realistic than a smooth finish, i think. and its steel, which is good. since it attracts magnets. honestly, just as good or better than a cm035.[/QUOTE] Thanks, I'll see what I can do with the sight. Also the box has the previous owner's address on it for the return address, I should send him a postcard.
or if stalin wills
That mystery bit of plastic is the hopup spacer. Goes between the hopup and the inside front of the receiver. Trust me, my only tech experience is on AKs and I'd recognize that thing anywhere. [editline]7th August 2012[/editline] [t]https://dl.dropbox.com/u/34238144/ak%20hopup%20spacer.jpg[/t] It's that L shaped piece, fits between the rear sight and the hopup, has a cutout for the fuse. [editline]7th August 2012[/editline] I'm here if you have AK questions.
So I should be fine with leaving it out for now? [editline].[/editline] Oh I see, thanks for the photo. It helps with adjusting the hop up a whole lot, when I first put the battery in I was wondering why the hop up adjustment was just a flimsy piece of plastic that slides.
I'm not sure, but it should basically just pop into place.
[IMG]http://i.imgur.com/Eshlv.png[/IMG] paint pro
If that's a dboys then you should have an awesome sling, that shit will never break
So I'm thinking for my next gun, I might just pick up an old surplus rifle stock, cut it down, and drop in a v7 gb and a hopup+innerbarrel and make myself a little carbine type thing. Should cost me less than $100. y/n?
[QUOTE=felix the cat;37133502]So I'm thinking for my next gun, I might just pick up an old surplus rifle stock, cut it down, and drop in a v7 gb and a hopup+innerbarrel and make myself a little carbine type thing. Should cost me less than $100. y/n?[/QUOTE] What mags will it use? Rails/no rails? More details?
Probably stanags since I've got a bunch of them. Something Cold War-ish looking probably.
get XM177 br0 [img]http://upload.wikimedia.org/wikipedia/commons/thumb/b/bf/USAF_MP_with_Colt_Commando.JPEG/800px-USAF_MP_with_Colt_Commando.JPEG[/img] I want to do this load out, but idk. I'm not sure of the availability of PASGT in 6 color.
[url=http://www.ebay.com/itm/48-US-ARMY-DESERT-STORM-PASGT-VESTS-MILITARY-SURPLUS-/310412456514?pt=LH_DefaultDomain_0&hash=item4846063242#ht_896wt_1163]NEVERMIND LMAO. VESTS FOR IFAP[/url] [editline]8th August 2012[/editline] what the fuck automerge.
NO WE ARE STAYING DCU FOR NEXT MEETUP OK
That'll do.
[QUOTE=Back_Slash;37135170]get XM177 br0 [img]http://upload.wikimedia.org/wikipedia/commons/thumb/b/bf/USAF_MP_with_Colt_Commando.JPEG/800px-USAF_MP_with_Colt_Commando.JPEG[/img] I want to do this load out, but idk. I'm not sure of the availability of PASGT in 6 color.[/QUOTE] pasgt dbdu cover is ez to find [editline]8th August 2012[/editline] [url]http://www.ebay.com/itm/US-Military-6-Color-Desert-PASGT-Kevlar-Helmet-Cover-Size-Medium-Large-NOS-/320946479137?pt=LH_DefaultDomain_0&hash=item4ab9e6a021[/url]
[QUOTE=TehG3A3;37137234]NO WE ARE STAYING DCU FOR NEXT MEETUP OK[/QUOTE] NIGHT DESERT? OK.
[img]https://sphotos-b.xx.fbcdn.net/hphotos-ash3/s720x720/625487_4557901310687_1580440367_n.jpg[/img] Check out what Taiwan made and tested in 1968.... looks chillingly like an AUG, what the fuck?
[QUOTE=the_killer24;37132082][IMG]http://i.imgur.com/Eshlv.png[/IMG] paint pro[/QUOTE] Quite honestly, I hate that spacer design. I got rid of mine and got a good sized spring at a local hardware store long and wide enough to fit on the barrell. Keeps the hop up nice and snug against the gearbox.
Guy on ASF selling a TM M16A2 for $110 if anyone is interdasted: [url]http://www.airsoftforum.com/board/WTS-Tokyo-Marui-M16A2-E-t252195.html[/url]
[media]http://www.youtube.com/watch?v=qi-Hsn6J0Aw&feature=youtu.be[/media] review of my kwc walther p99
Hey guys, my parents are in Italy and they keep passing a surplus store there. They're asking me if i want anything. In terms of Italian gear and shit, what's worth getting?
pizza
a guide to advanced hand signals.
buy some Vegetas
Find out how much Vegetata is because I'll jump all over that shit.
[QUOTE=Back_Slash;37137159][url=http://www.ebay.com/itm/48-US-ARMY-DESERT-STORM-PASGT-VESTS-MILITARY-SURPLUS-/310412456514?pt=LH_DefaultDomain_0&hash=item4846063242#ht_896wt_1163]NEVERMIND LMAO. VESTS FOR IFAP[/url] [editline]8th August 2012[/editline] what the fuck automerge.[/QUOTE] [B][I][U]THOSE ARE ONLY VEST COVERS[/U][/I][/B]
tactical spaghetti holster
Sorry, you need to Log In to post a reply to this thread.