Airsoft Chat Thread V.7 Shimano gears are the best
9,934 replies, posted
[QUOTE=Herfjotur;35627817]Got pouches for my vest, since Wulf got his own vest and won't be using this one anymore. No more crossdraw for me. He says I look like a woman.
[IMG]http://i.imgur.com/CjFOal.jpg[/IMG][/QUOTE]
Nice vest and nice hair, I wish I could be patient and grow mine out :c Either way, I would totes buy that off you if I had money, seriously.
[QUOTE=Herfjotur;35627817]Got pouches for my vest, since Wulf got his own vest and won't be using this one anymore. No more crossdraw for me. He says I look like a woman.
[IMG]http://i.imgur.com/CjFOal.jpg[/IMG][/QUOTE]
Probably because you have long hair, you're wearing that shemagh like a scarf, you have bracelets, and you're not wearing a shirt lol.
The hair is a bitch for airsoft, always gets pulled when I shoulder my gun and my bangs aren't long enough to reach in to a pony tail.
Also, scarf shemagh because I have a hat on.
[QUOTE=Kath;35627841]Will this fit a CM045, do you know?[/QUOTE]
74us have shorter handguards
My stuff came from evike, got my vest, pouches, BB's, silicon, patches, gearbox wires and my mag catch, only problem is mag catch doesnt fit so I'm RMAing it for a different one.
fuck bayonet lugs honestly
can't lock my fucking suppressor onto my flash hider because the lug is in the way
[B][I]~HACKSAW TIME~[/I][/B]
Are any of you extremely protective of your (new) guns? I'm even scared to lean my SVD on anything because I'm worried it'll mess with the stock over time or something.
The stock also fell off when I was holding it up and trying to find a screw and slammed into the ground. It wasn't harmed though. I took this as a sign of quality. :v:
i'm not scared of the integrity of my guns when i abuse them
im scared of my wood/fakelite finish getting fucked up
[QUOTE=Nifae;35629336]Are any of you extremely protective of your (new) guns? I'm even scared to lean my SVD on anything because I'm worried it'll mess with the stock over time or something.
The stock also fell off when I was holding it up and trying to find a screw and slammed into the ground. It wasn't harmed though. I took this as a sign of quality. :v:[/QUOTE]
If it's a RS, it's every bit as indestructible as the real thing, so I wouldn't worry.
[QUOTE=Nifae;35629336]Are any of you extremely protective of your (new) guns? I'm even scared to lean my SVD on anything because I'm worried it'll mess with the stock over time or something.
The stock also fell off when I was holding it up and trying to find a screw and slammed into the ground. It wasn't harmed though. I took this as a sign of quality. :v:[/QUOTE]
Nah. I even go as far as letting people who's guns crapped out use my $500 ARES Tavor. The more you abuse a gun the better it usually ends up looking and usually they can handle it. I think my BE Type 89 may be the weakest of my AEG's and even than I took my Tactical Engagement Course with it and nothing went wrong after dragging and banging it around in the dirt all day.
[QUOTE=catbarf;35629371]If it's a RS, it's every bit as indestructible as the real thing, so I wouldn't worry.[/QUOTE]
i think he got the a&k springer
Oh yeah I still need to PM him about the shell door(?) and shell lifter
[url]http://www.evike.com/product_info.php?products_id=38265[/url]
moist nugget again rebranded by matrix
fyi real steel nugget stock will require some serious modification to fit the shs nugget
[QUOTE=Kath;35627841]Will this fit a CM045, do you know?[/QUOTE]
Unfortunately they will only fit on a full sized ak47 or ak74.
[QUOTE=TehG3A3;35629075]fuck bayonet lugs honestly
can't lock my fucking suppressor onto my flash hider because the lug is in the way
[B][I]~HACKSAW TIME~[/I][/B][/QUOTE]
Bayonet > Suppressor imo
So this guy is selling his custom built M1919 aeg for $500 (he's posting listings on Red Alliance, WWII airsoft, and VietnamAirsoft)
[media]http://www.youtube.com/watch?v=tx4vAHIq7qs[/media]
aaaaAAAAAAAAAA[B]AAAAAAAAAAAAAAAAAAAAAAAAAAAA[/B]
spade grips on a 1919 :I
A lot of real 1919s had spade grips, especially when tripod mounted.
Edit: I think. I know there are some aftermarket ones for privately-owned 1919s, pretty sure they were used on military ones too.
The variant with spade grips was never adopted by the military, and never actually left working-prototype stage.
Obviously now-a-days you can buy kits for them, but they never left the factory that way.
What's the military without customization?
Like the guy who made the tank hedgers for going through hedgerows
or the marines who made the one man operable 1919
Well the whole point of the M1919 not having spade grips was so it could be operated by 1 person if need be...
yea so if you do a Pacific Marine load out you're good 2 go
spade grip or not, I wanna put it on a surplus Willy's MB and rock it at events
hhhnnnnnggg Willys MB. By far one of my favorite vehicles of all time
[QUOTE=Kill001;35631963]So this guy is selling his custom built M1919 aeg for $500 (he's posting listings on Red Alliance, WWII airsoft, and VietnamAirsoft)
[media]http://www.youtube.com/watch?v=tx4vAHIq7qs[/media]
aaaaAAAAAAAAAA[B]AAAAAAAAAAAAAAAAAAAAAAAAAAAA[/B][/QUOTE]
holla holla get $
So there's a night game tonight...
Rate agree if I should run my three-hole balaclava for that generic bad guy look.
[QUOTE=Jenkem;35640809]So there's a night game tonight...
Rate agree if I should run my three-hole balaclava for that generic bad guy look.[/QUOTE]
Only if you can do the rest of the outfit justice.
[QUOTE=notrabies;35640872]Only if you can do the rest of the outfit justice.[/QUOTE]
What else would I need? I can run several different setups that would look varyingly baddie-like. No PACAs yet, though, for the Phoenix loadout...
Sorry, you need to Log In to post a reply to this thread.