• Attention newbies, this is the Official "is this a good idea?" thread
    2,001 replies, posted
[QUOTE=BlueSaint;22650136]See:evike Evike: [del]fake reviews[/del] Usualy ships thing extremely late or not at all [del]ships wrong items[/del] ships items broken overall bad site.[/QUOTE] Evike has gotten better.
[QUOTE=CodeMonkey3;22650155]Well, I want to carry a grenade around, Tornado Grenades and such cost over a hundred bucks. I have an M203 launcher but it's heavy. I figure I can just carry around a M203 grenade on my vest (Because it's tacticool) and trigger it with my finger to use it against another team if they're close enough. Like a mini-shotgun. I just wanted to know if I'll get frostbite or something from the gas. I can trigger it no problem, just wanted to know if it's safe.[/QUOTE] You won't get frostbite, unless you put your hand in front of the shell but I think frostbite will be the least of your worries then. I did this at the last CQB Game, nailed 3 guys by shooting outside the window.
So here is my upgrade shopping list: Madbull Ver. 2 Precision Inner Barrel (Length: 509mm Bore: 6.03mm) Should fit my M15 A4 Carbine, correct? [url]http://www.airsoftgi.com/product_info.php?products_id=1231[/url] Guarder SP110 Spring. [url]http://www.airsoftgi.com/product_info.php?products_id=1071[/url] I already have a Systema Hop-up Bucking. So, anything else I need? This setup should increase my FPS to alittle under 400 and increase my range. Yes? Will I need a better Piston, motor etc? In addition, I need a new Anti-Reversal Latch, will any do or do I need a certain one to fit my Classic Army? I'm looking at this Guarder Anti-reversal Latch For Gearbox Ver 2&3. Pretty sure it'll work but I'm very unsure of myself if you can't tell by now. [url]http://www.airsoftgi.com/product_info.php?products_id=1081[/url]
[QUOTE=CodeMonkey3;22652895]So here is my upgrade shopping list: Madbull Ver. 2 Precision Inner Barrel (Length: 509mm Bore: 6.03mm) Should fit my M15 A4 Carbine, correct? [URL]http://www.airsoftgi.com/product_info.php?products_id=1231[/URL] Guarder SP110 Spring. [URL]http://www.airsoftgi.com/product_info.php?products_id=1071[/URL] I already have a Systema Hop-up Bucking. So, anything else I need? This setup should increase my FPS to alittle under 400 and increase my range. Yes? Will I need a better Piston, motor etc? In addition, I need a new Anti-Reversal Latch, will any do or do I need a certain one to fit my Classic Army? I'm looking at this Guarder Anti-reversal Latch For Gearbox Ver 2&3. Pretty sure it'll work but I'm very unsure of myself if you can't tell by now. [URL]http://www.airsoftgi.com/product_info.php?products_id=1081[/URL][/QUOTE] Looks good but I will warn you that spring may have a chance of hitting 410FPS, may be required to leave it compressed for a while. And yes that antireversal latch will work.
Okay, thanks. So I won't need anything else? 410FPS is fine, it's a strictly a field rifle and I only play with friends so I don't need to fit any field regulation. By the time I get to a real field the thing should be clocking less then 400 from use and compression. Thank you so much for helping me work out what I need, I would have been lost without you.
green gas gives frostbite? I thought only c02 is the cold one?
[QUOTE=BlueSaint;22660453]green gas gives frostbite? I thought only c02 is the cold one?[/QUOTE] No it has happened to me before. My mag spewed propane right where my hand was, not fun at all.
[QUOTE=CubeManv2;22646863]I know someone who rolled with a JG Beta and just regular street clothes with really baggy pants. He had a grand of a time and no one knocked him for it.[/QUOTE] I sometimes stroll into a game full of elite-ists dressed in shorts, t-shirt, tennis shoes and a stock JG AK just to listen to their reactions and own them newb style. [editline]03:03PM[/editline] [QUOTE=Stupideye;22662229]No it has happened to me before. My mag spewed propane right where my hand was, not fun at all.[/QUOTE] Same here! I hate the WELL MP5K mags...
thread lock soon fellow airsofters Don't worry, i will remake.
:woop: New thread time!
Snipped.[/stupidity]
[QUOTE=Mooee;22671706]Could someone post the link to thread once we get a new one? I have yet to find the actual subforum.[/QUOTE] [IMG]http://i46.tinypic.com/5kfuoo.jpg[/IMG] Clicky-clicky Then add to bookmarks/favourites.
Quick question, will the Mad Bull ultimate hop up fit in my dboy PDW? I really want it and I am under the impression it will fit.
still a good 66 posts left, guys. I will make it when this thread locks.
No, stop trying to lock thread, I want my question answered! :argh:
Well this is a new problem I've encountered. Most vests are too large for me. Not much I can do for that on the short term, so I'll just look for a smaller vest. Anyone know of any MOLLE vests that can be adjusted smaller than (apparently) normal? Preferably plate carriers, but anything goes. And not the spec ops mini plate-carrier vest. Tried that. Don't like that too much.
[QUOTE=Mbbird;22674185]Well this is a new problem I've encountered. Most vests are too large for me. Not much I can do for that on the short term, so I'll just look for a smaller vest. Anyone know of any MOLLE vests that can be adjusted smaller than (apparently) normal? Preferably plate carriers, but anything goes. And not the spec ops mini plate-carrier vest. Tried that. Don't like that too much.[/QUOTE] Condor's Interceptor carrier can be tightened really far. If you're looking for prices, check Amazon. I spent $60 on my vest as opposed to $90.
Fuck you. [editline]12:24AM[/editline] Ah, well.. Airsoft GI deserves the extra twenty for their service. Support the small business and all.
[QUOTE=CodeMonkey3;22650155]Well, I want to carry a grenade around, Tornado Grenades and such cost over a hundred bucks. I have an M203 launcher but it's heavy. I figure I can just carry around a M203 grenade on my vest (Because it's tacticool) and trigger it with my finger to use it against another team if they're close enough. Like a mini-shotgun. I just wanted to know if I'll get frostbite or something from the gas. I can trigger it no problem, just wanted to know if it's safe.[/QUOTE] Frostbite? No way. I've had so much gas leak and spray on me and nothing has happened. You would have to keep your finger in it for a while before you get frostbite. No worries.
[QUOTE=Pulp Free;22674622]Frostbite? No way. I've had so much gas leak and spray on me and nothing has happened. You would have to keep your finger in it for a while before you get frostbite. No worries.[/QUOTE] Well, frostbite may be a bit extreme but you CAN hurt yourself on that shit. Today I was going to do a live fire exercise in my new gear to check everything out before my game this weekend and I was loading my mags, while loading the nozzle came lose from the mag and I got a big spray on my thumb. Burnt like fuck, luckily it wasn't a long exposure and I was wearing wool fingerless gloves so most of my thumb was protected. The bit that was hit is fine now but it stung for ten minutes afterwards and that was just from a second of exposure. I could imagine it doing some serious harm if you were to have prolonged exposure, higher pressure or a larger area it touches.
[QUOTE=CodeMonkey3;22674562]Fuck you. [editline]12:24AM[/editline] Ah, well.. Airsoft GI deserves the extra twenty for their service. Support the small business and all.[/QUOTE] Love you too.
[QUOTE=Identity;22674263]Condor's Interceptor carrier can be tightened really far. If you're looking for prices, check Amazon. I spent $60 on my vest as opposed to $90.[/QUOTE] An Interceptor is in no way going to be small. If you really want to tighten a plate carrier some more, add the fake plastic plates. I run my CIRAS with them and it makes a much better fit. But honestly, I can't really say what sort of vest will fit someone who's skinny. You'll probably want to look for ones that are adjustable on the sides, those tend to work. Another option to get some soft body armor and toss a chest rig over that. Ebaybanned might give you some ideas. [url]http://www.ebairsoft.com/combat-gear-vest-c-62_27.html[/url]
[QUOTE=xXEnder007Xx;22674802]An Interceptor is in no way going to be small. If you really want to tighten a plate carrier some more, add the fake plastic plates. I run my CIRAS with them and it makes a much better fit. But honestly, I can't really say what sort of vest will fit someone who's skinny. You'll probably want to look for ones that are adjustable on the sides, those tend to work. Another option to get some soft body armor and toss a chest rig over that. Ebaybanned might give you some ideas. [url]http://www.ebairsoft.com/combat-gear-vest-c-62_27.html[/url][/QUOTE] Well yeah, it's not going to be small, but adding the plates and tightening to the max will allow to hug you enough to where it feels secure.
I'm a pretty small guy and my Interceptor fits me snug, makes me look like a man too. Makes me feel like a man.
[QUOTE=Pulp Free;22674622]Frostbite? No way. I've had so much gas leak and spray on me and nothing has happened. You would have to keep your finger in it for a while before you get frostbite. No worries.[/QUOTE] Its happened to me. If its under a lot of pressure (sprays out really fast) you can get frostbite quick.
I'm thinking of throwing an ambidextrous mag release into my M4. Has anyone seen or had experience with one?
[quote=identity;22674263]condor's interceptor carrier can be tightened really far. If you're looking for prices, check amazon. I spent $60 on my vest as opposed to $90.[/quote] [quote=codemonkey3;22674562]fuck you. [editline]12:24am[/editline] ah, well.. Airsoft gi deserves the extra twenty for their service. Support the small business and all.[/quote] 60 + 20 =/= 90.
I had a coooooooupon [editline]06:52AM[/editline] I got it during the Memorial Day sale.
[QUOTE=L_Dawg;22678315]60 + 20 =/= 90.[/QUOTE] Why is there such fail math in this thread?
[QUOTE=Fenriswolf;22672942]Quick question, will the Mad Bull ultimate hop up fit in my dboy PDW? I really want it and I am under the impression it will fit.[/QUOTE] Retoast. :saddowns:
Sorry, you need to Log In to post a reply to this thread.