CQAR-552
Round - 5.52x51 MM
RoF - 950 RPM
Muzzle Velocity - 3150 f/s
Feed - 25 Round Detachable Box Magazine
This weapon was designed for police and special operation forces. Having the range, stopping power, and muzzle velocity of a rifle, but the compact, small body of a SMG for close range combat. This bridges the gap between assault rifles and SMGs.
Images:
(Long barreled, extended stock, iron sights)
[IMG]http://filesmelt.com/dl/myweapon58.jpg[/IMG]
(Short barrel. RDS, retracted stock)
[IMG]http://filesmelt.com/dl/myweapon116.jpg[/IMG]
[QUOTE=DesumThePanda;30401219]CQAR-552
Round - 5.52x51 MM
RoF - 950 RPM
Muzzle Velocity - 3150 f/s
Feed - 25 Round Detachable Box Magazine
This weapon was designed for police and special operation forces. Having the range, stopping power, and muzzle velocity of a rifle, but the compact, small body of a SMG for close range combat. This bridges the gap between assault rifles and SMGs.
Images:
(Long barreled, extended stock, iron sights)
[IMG]http://filesmelt.com/dl/myweapon58.jpg[/IMG]
(Short barrel. RDS, retracted stock)
[IMG]http://filesmelt.com/dl/myweapon116.jpg[/IMG][/QUOTE]
Sorry, but you wouldn't be able to reach the trigger or the fore grip. There isn't enough room for your hand, the trigger is too far forward and the mag is just way too close to the grip. I'm to tired to comment on the rest, they're good.
Also ejection port (and proprietary caliber, if that counts as a flaw).
[QUOTE=the_killer24;30401552]Also ejection port (and proprietary caliber, if that counts as a flaw).[/QUOTE]
Uhhh
[img]http://filesmelt.com/dl/12986.jpg[/img]
that's the point
you'd have to have some system to slide the bullet back and up into the ejection port area
[QUOTE=the_killer24;30401826]that's the point
you'd have to have some system to slide the bullet back and up into the ejection port area[/QUOTE]
Yeah, now that I think about it that gun would have basically no way to chamber the bullets, you'd have to fire them from the magazine or load them backward somehow. Neat idea but so impossible :\
Heavy support gun from [i]the future[/i] (I just use that as an excuse for the ejection port being behind the magazine :v:)
[img]http://dl.dropbox.com/u/1317195/strike%20LMG.jpg[/img]
[QUOTE=krail9;30404442]Heavy support gun from [i]the future[/i] (I just use that as an excuse for the ejection port being behind the magazine :v:)
[img]http://dl.dropbox.com/u/1317195/strike%20LMG.jpg[/img][/QUOTE]
this is bad-ass, despite the lack of blending. Damn good work :v:
[QUOTE=matrix_1995;30404803]this is bad-ass, despite the lack of blending. Damn good work :v:[/QUOTE]
...I don't think it needs blending, looks damn good anyways :v:
[QUOTE=NightWig;30399656]BBM8095 MWS
[IMG]http://farm3.static.flickr.com/2628/5822449539_b668784a36_b.jpg[/IMG]
For my build-off on Flickr[/QUOTE]
My competitor is done. I will share his weapons so you can see which one you think is better (even though it doesn't make a difference in the build-off)
[quote]
'Peleus' 20 gauge AR
[url="http://farm6.static.flickr.com/5112/5825925100_db0b700cfa_b.jpg"][img]http://farm6.static.flickr.com/5112/5825925100_db0b700cfa_b.jpg[/img][/url]
Cheaper alternative to caseless rounds for reducing the amount of metal used in cartridges, using shotgun shells with special dart slugs, in conjunction with rifled barrels. Poor ballistics in long range use, but suitable for effective ranges.
'Peleus' 28 gauge Carbine
[url="http://farm3.static.flickr.com/2704/5825367295_387018fd48.jpg"][img]http://farm3.static.flickr.com/2704/5825367295_387018fd48.jpg[/img][/url]
'Peleus' 12 gauge DMR
[url="http://farm3.static.flickr.com/2552/5825367395_617f9afda8_b.jpg"][img]http://farm3.static.flickr.com/2552/5825367395_617f9afda8_b.jpg[/Img][/url]
[/quote]
The criterion was to make a Modular Weapon System that wouldn't be able to work in some way.
His are blended much better, but design wise they're both weird so I don't know. Yours looks like a melting XM8 (a really well done melting XM8 of course, it's still really cool) and his looks like a barrel with a gun attached to it (also exceedingly well done of course).
Heh, heh...shotgun Markskman Rifle....heh
[IMG]http://i51.tinypic.com/2qtcvon.jpg[/IMG]
[QUOTE=lolerot95;30417971][IMG]http://i51.tinypic.com/2qtcvon.jpg[/IMG][/QUOTE]
The magazine could be a tad bigger, and the bipod needs to be longer, and the barrel is too short, I guess the Forward Assist has become the Charging Handle, the stock's a bit to big.
Other than that, it's a pretty OK rifle.
[QUOTE=lolerot95;30417971][IMG]http://i51.tinypic.com/2qtcvon.jpg[/IMG][/QUOTE]
All you did was take a preset, pasted on a SCAR stock, silencer, scope, bipod, and a different magazine.
:frog:
[QUOTE=lolerot95;30429333]Actually no, I didn't use a preset.
here's the code:[/QUOTE]
Presets have codes aswell :doh:
[QUOTE=jomt1234;30429605]Presets have codes aswell :doh:[/QUOTE]
Yeah, I know, but i shared the code so you could disassemble the gun so you can see that it's not a preset.
Anyways i made a new Assault rifle but I don't have a name for it yet so lets just call it B6D2.
[IMG]http://i55.tinypic.com/2mzgpr4.jpg[/IMG]
KP35
[img]http://farm4.static.flickr.com/3647/5830087655_7db174aa76_b.jpg[/img]
K-Pist modell 2035 from DINOMASTERS
That's a hella long stock.
[QUOTE=DeVotchKa;30439417]That's a hella long stock.[/QUOTE]
Sweet Dinomaster and Hella Stock
G36 triggergroup
[img]http://farm4.static.flickr.com/3161/5830767808_792c4ab508_m.jpg[/img]
Fully recolourable. Spawned at size 200.
[url]www.mediafire.com/?5bldbgc5ubm08l9[/url]
OIPSCW-55
Round - 50BMG, 40MM
RoF - Grenade launcher: 450 RPM, Machine Gun: 600 RPM
Feed - 10 round box magazine (GL), 200 round detachable box magazine (MG)
Next in the the generation of OICW weapons is the OIPSCW-55 (Objective Individual Portable Stationary Combat Weapon). This weapon is heavy and I'm not going to lie to you, it's expensive as hell. This weapon weighs roughly 90 LBS when fully loaded and 70 unloaded. It has two weapons build in one. A 50 BMG machine gun (The middle barrel, magazine located in the bottom of the stock) and a 40MM grenade launcher. (Top barrel, magazine right behind the pistol grip) The main goal was the revolutionize defensive tactics in the military.Light enough to carry a few meters but with far enough firepower to fight an entire platoon.
Image:
[IMG]http://filesmelt.com/dl/myweapon59.jpg[/IMG]
Code:
[code]<weapon>
<group x="863.9" y="1064.45" rotation="0" scale="1" flip="1,1">
<part id="MagAcc03" x="340.05" y="197.3" rotation="0" scale="1" flip="1,1" colors="666666"/>
<part id="MagAcc03" x="358.05" y="173.3" rotation="-90.7746572772058" scale="0.9999540648350318" flip="1,1" colors="666666"/>
<part id="MagAcc03" x="358.05" y="137.3" rotation="-90.84896100747325" scale="1" flip="1,1" colors="666666"/>
<part id="BufferTube02" x="354.05" y="11.3" rotation="89.99720367750662" scale="0.8325226682680209" flip="-1,1" colors="666666"/>
<part id="Barrel025" x="-240.9" y="-56.85" rotation="0" scale="1" flip="1,1" colors="666666"/>
<part id="GL01TubeS" x="-233.7" y="-123.2" rotation="0" scale="1.2402918481684562" flip="-1,1" colors="444444"/>
<part id="FStock02" x="226.25" y="34" rotation="0" scale="1.144264174641849" flip="-1,1" colors="444444,444444,ac9c7b"/>
<part id="Shape07" x="31.85" y="7.75" rotation="0" scale="2.117007605351308" flip="1,-1" colors="ffffff"/>
<part id="Barrel005" x="-114.9" y="-85.95" rotation="0" scale="1" flip="-1,1" colors="ac9c7b"/>
<part id="Shape09" x="-95.9" y="-123.95" rotation="0" scale="1.796844482421875" flip="1,1" colors="444444"/>
<part id="Shape09" x="-5.9" y="-123.95" rotation="0" scale="1.7968556504878905" flip="1,1" colors="444444"/>
<part id="RMag012" x="198.05" y="22" rotation="0" scale="1.0161254279571366" flip="1,1" colors="ac9c7b"/>
<part id="GL01TubeL" x="-83.75" y="-59.3" rotation="0" scale="1" flip="-1,1" colors="444444"/>
<part id="LReceiver017" x="136" y="-71.95" rotation="0" scale="1" flip="-1,1" colors="444444,ac9c7b,ac9c7b"/>
<part id="Shape10" x="39.05" y="-59.95" rotation="0" scale="0.7772617922221889" flip="1,1" colors="ffffff"/>
<part id="RIS010" x="-136.9" y="-50.95" rotation="0" scale="1" flip="1,1" colors="444444,ac9c7b"/>
<part id="Foregrip001" x="-136.9" y="7" rotation="0" scale="1" flip="1,1" colors="444444"/>
<part id="FlashHider001" x="-331.9" y="-85.95" rotation="0" scale="1" flip="-1,1" colors="ac9c7b"/>
<part id="Buttplate01" x="368.25" y="-59.95" rotation="0" scale="1" flip="-1,1" colors="ac9c7b"/>
<part id="CheekRest03" x="-180.9" y="-125.95" rotation="0" scale="1" flip="1,1" colors="444444,444444"/>
<part id="CheekRest01" x="-179.9" y="-132.95" rotation="0" scale="1" flip="1,1" colors="444444"/>
<part id="ChamberLid01" x="204.15" y="-133.95" rotation="0" scale="1" flip="-1,1" colors="666666"/>
<part id="RIS010" x="-25.9" y="-93.95" rotation="0" scale="1" flip="1,-1" colors="ac9c7b,ac9c7b"/>
<part id="RIS023" x="274.85" y="149.7" rotation="92.24903743259797" scale="1.2677248632019322" flip="1,1" colors="444444,666666"/>
<part id="Shape01" x="282.85" y="206.5" rotation="0" scale="1" flip="-1,1" colors="ffffff"/>
<part id="Shape01" x="280.85" y="92.6" rotation="0" scale="1" flip="-1,1" colors="ffffff"/>
<part id="RMag012" x="312.75" y="148.75" rotation="0" scale="1" flip="-1,1" colors="444444"/>
<part id="Shape02" x="312.85" y="152.45" rotation="0" scale="2.7364201655827842" flip="-1,1" colors="666666"/>
<part id="LReceiver018B" x="318" y="102.35" rotation="0" scale="1.2145976802021627" flip="1,1" colors="444444,666666"/>
<part id="RIS010" x="-184.9" y="-150.85" rotation="0" scale="1" flip="1,-1" colors="ac9c7b,ac9c7b"/>
<group x="-215.9" y="-192.85" rotation="0" scale="1" flip="-1,1">
<part id="ISight030A" x="-28.1" y="-1.65" rotation="0" scale="1" flip="1,1" colors="ac9c7b"/>
<part id="ISight030B" x="0" y="22" rotation="0" scale="1" flip="1,1" colors="ac9c7b,444444"/>
</group>
<group x="-301.85" y="-30.85" rotation="0" scale="1" flip="-1,1">
<part id="Bipod02A" x="18.15" y="14.05" rotation="0" scale="1" flip="1,1" colors="666666,444444"/>
<part id="Bipod02D" x="-8.6" y="12.6" rotation="0" scale="1" flip="1,1" colors="666666,666666"/>
<part id="Bipod02B" x="-44.7" y="0.85" rotation="0" scale="1" flip="1,1" colors="666666,444444"/>
<part id="Bipod02C" x="-26.75" y="-15.95" rotation="0" scale="1" flip="1,1" colors="666666"/>
</group>
<part id="RedDot009" x="-15.9" y="-123.85" rotation="0" scale="1" flip="-1,1" colors="ac9c7b,ac9c7b"/>
<part id="MagAcc02" x="296.05" y="202.3" rotation="0" scale="1" flip="1,1" colors="666666"/>
</group>
</weapon>[/code]
Why
[QUOTE=DesumThePanda;30442855]-shit-[/QUOTE]
And you're the one who calls people with presets dumb.
mmkay
[QUOTE=Zillamaster55;30442920]And you're the one who calls people with presets dumb.
mmkay[/QUOTE]
Prese-
What
[QUOTE=DesumThePanda;30442967]Prese-
What[/QUOTE]
It's an example, calm down.
When you go around freaking out about Presets, and giving people the ":frog:", you start to look like an ass, no offense.
And then you post something like that, expecting to be taken seriously.
It's irony, that's all
The irony.
M24 bullpup
[img]http://farm6.static.flickr.com/5315/5832160731_5c1db01475_b.jpg[/img]
Made in 0.6
Sorry, you need to Log In to post a reply to this thread.