[QUOTE=matrix_1995;30653405][IMG]http://i1114.photobucket.com/albums/k522/MagnusJMJ/myweapon5.jpg[/IMG]
What have i done :barf:[/QUOTE]
I'd use it.
[QUOTE=matrix_1995;30632499]V2! :razz:
[IMG]http://i1114.photobucket.com/albums/k522/MagnusJMJ/myweapon4.png[/IMG]
[editline]22nd June 2011[/editline]
I ran this through Acorn just to get some transparency in it and remove the website in the lower right corner, but I'm afraid the Magic Wand tool has scratched off some of the outlines :saddowns:[/QUOTE]
1. How the hell is it being fed
2. Where the hell would you put the firing pin
3. the recoil would be insane
[QUOTE=desrt_rat;30663558]1. How the hell is it being fed
2. Where the hell would you put the firing pin
3. the recoil would be insane[/QUOTE]
No, thats no the problem, its got a pistol slide. The problem is that the only place for your face to rest is on that recoiling slide; also can't shoulder it for that same reason.
[IMG]http://i269.photobucket.com/albums/jj66/the_killer23/scarpup.jpg[/IMG]
NITEWEEG AM I KOOL YET
Yes, I know, two ejection ports, redundant magazine release, this gun would never work, etc etc
[QUOTE=DesumThePanda;30646505]How so?
[editline]22nd June 2011[/editline]
DI-AC-A3
Cartridge - 7.62x51mm
RoF - 800
Weight - 10lbs
The DI-AC-A3 is the third version of the AC weapons. A3 includes improvements such as lowering the rate of fire (after many people complained about aching shoulders and the hard to control firing rate and accuracy issues), a new improved stock, pistol grip, new magazine and magazine mechanism, and a build on front grip similar to the M1A1 Thompson. Also added support for synthetic parts.
[img]http://filesmelt.com/dl/myweapon510.jpg[/img]
[img]http://filesmelt.com/dl/myweapon69.jpg[/img][/QUOTE]
impossible 2 hold guns - volume ii
[QUOTE=desrt_rat;30663558]1. How the hell is it being fed
2. Where the hell would you put the firing pin
3. the recoil would be insane[/QUOTE]
It's based on the Koborov TKB-022's system
[url]http://world.guns.ru/assault/rus/korobov-tkb-022-e.html[/url]
[editline]24th June 2011[/editline]
Don't see how the recoil would be insane, though. Technically, it [i]could[/i] be fired from the shoulder, and even if fired from the hip, theres a sturdy foregrip to aid that. Bear in mind, that's not a very big caliber.
[QUOTE=MenteR;30674778]impossible 2 hold guns - volume ii[/QUOTE]
How are they impossible to hold?
[QUOTE=matrix_1995;30674797]It's based on the Koborov TKB-022's system
[url]http://world.guns.ru/assault/rus/korobov-tkb-022-e.html[/url]
[editline]24th June 2011[/editline]
Don't see how the recoil would be insane, though. Technically, it [i]could[/i] be fired from the shoulder, and even if fired from the hip, theres a sturdy foregrip to aid that. Bear in mind, that's not a very big caliber.[/QUOTE]
I still don't understand your fetish for bullpups, but eh. To each his own and shit.
[QUOTE=DesumThePanda;30674832]How are they impossible to hold?[/QUOTE]
There's no space for thumb.
[QUOTE=venom;30674944]I still don't understand your fetish for bullpups, but eh. To each his own and shit.[/QUOTE]
NightWig's the one with the bullpup fetish, i just submitted my work because it seemed relevant in light of the bullpup bandwagon :v:
[QUOTE=matrix_1995;30676985]The back part is pure gold, but the front is a bit messy. :v:
[editline]24th June 2011[/editline]
[IMG]http://i1114.photobucket.com/albums/k522/MagnusJMJ/myweapon6.jpg[/IMG]
Decided to mess around with it
[/QUOTE]
[b]I declare competition![/b]
Here's my edit of Jomt's bulpup:
[img]http://filesmelt.com/dl/myweapon261.jpg[/img]
Whoa, nice work guys, glad I've made something workable :3::3::3:
[IMG]http://i1114.photobucket.com/albums/k522/MagnusJMJ/myweapon7.jpg[/IMG]
Fancy assault rifle, nothing special
Here's my take on an bullpup.
DI-LR-A1
Cartridge - 5.56
RoF - 950
Weight - 8.5 lbs
Feed - Detachable Box Magazine.
Fire Modes - Fully Automatic or Burst or Semi
The DI-LR-A1 is our take on the new weapon front - bullpups. Designed for great accuracy, even over long ranges. Having the bullpup design is excellent for close quarters as well because of it's light frame and compact size.
[img]http://filesmelt.com/dl/myweapon123.jpg[/img]
Whats with everyone's bullpup obsession and lack of room for firing pins?
[QUOTE=desrt_rat;30682201]Whats with everyone's bullpup obsession and lack of room for firing pins?[/QUOTE]
Oh, I'm sorry, i must have missed your mechanically flawless yet aesthetically pleasing contribution :downs:
I quote myself;
[QUOTE=matrix_1995;30674797]It's based on the Koborov TKB-022's system
[url]http://world.guns.ru/assault/rus/korobov-tkb-022-e.html[/url][/QUOTE]
[code]The TKB-022assault rifle is gas-operated weapon with annular gas piston located around the barrel. To achieve minimum length, it is assembled into bull-pup configuration and uses vertically sliding bereech block (bolt), rather than traditional and most common bolt that cycles back and forth. Since the movement of the bolt (breechblock) in this design cannot be used to extract, eject and load cartridges,Korobov developed a special U-shaped rammer / extractor, that strips the frech cartridge from magazine, pushes it into the chamber, then,after the discharge, pulls the fired cartridge case back from the chamber. Upon feeding the next fresh cartridge, the fired case is pushed forward and slightly up, into the ejection chute above the barrel.[/code]
[img]http://world.guns.ru/userfiles/images/assault/as94/tkb022_1.jpg[/img]
The russians made this shit [i]work[/i]
On an amusing note, had this weapon not existed, but been created in PMG, I'd bet a buck or two that people would guarantee that it couldn't possibly have functioned :v:
/rant
[QUOTE=matrix_1995;30682295]Oh, I'm sorry, i must have missed your mechanically flawless yet aesthetically pleasing contribution :downs:
I quote myself;[/QUOTE]
Oh man this is quite interesting. Thanks.
[editline]24th June 2011[/editline]
Also, You're right
[editline]24th June 2011[/editline]
[IMG]http://i68.photobucket.com/albums/i1/thomas2333306/myweapon.jpg[/IMG]
There I made a gun
[editline]24th June 2011[/editline]
Its old
[editline]24th June 2011[/editline]
And contradictory
[editline]24th June 2011[/editline]
inb4 well deserved boxes
[QUOTE=DesumThePanda;30681430]Here's my take on an bullpup.
DI-LR-A1
Cartridge - 5.56
RoF - 950
Weight - 8.5 lbs
Feed - Detachable Box Magazine.
Fire Modes - Fully Automatic or Burst or Semi
The DI-LR-A1 is our take on the new weapon front - bullpups. Designed for great accuracy, even over long ranges. Having the bullpup design is excellent for close quarters as well because of it's light frame and compact size.
[img]http://filesmelt.com/dl/myweapon123.jpg[/img][/QUOTE]
Use my code, same stock, better looking.
[QUOTE=PrusseluskenV2;30682291]There is NO room for recoil springs, firings pins, extractors or even bolts..[/QUOTE]
I honestly don't really give a fuck unless I'm going for extreme realism~ or are remaking a real gun
[QUOTE=jomt1234;30682428]Use my code, same stock, better looking.[/QUOTE]
I didn't use your code but I did base it off your gun.
I get inspiration from here alot
[QUOTE=DesumThePanda;30682640]I didn't use your code but I did base it off your gun.
I get inspiration from here alot[/QUOTE]
By "Use my code" I mean that you can use it, not that you used it :buddy: