You're trapped in a room, and you have these materials, how can you get out?
99 replies, posted
what you mean
Melt the ice with the buncen burner to make a puddle
Put the steel bar into the puddle
Pour acid onto the wettened bar
Boil the glycerin
Pour the hot glycerin onto the acid drenched bar so it will all combine
Suck up the materials and blow it at the door so it melts and you can escape
You make a thread about it.
If you're "not allowed" to apply direct force to the door, then that gives the impression that someone's watching the events take place inside the room. So what I'd do would be to pretend to drink one of the chemicals, cough, fall over and pretend to fall unconscious / die. Then, when someone comes to collect my "body", I take out the steel bar and bash their brains out, before making my escape. Foolproof.
I dont know. D:
take sulfuric acid
take medicine dropper
put acid in dropper
using dropper and acid burn a dick onto the floor
die a winner
Mix the acids and glycerin in the empty beaker and sniff to see if it smells like nitroglycerin.
trade the items for a key from the guy who owns the room
After breaking out, I'd go upstairs and kill the poor sod that decided to lock me up in a room with the steel bar until his head is just a red splatter on his shoulders.
I'd pour the acid over myself. :)
How would I get out? That's easy, I'd :frog:
I would open the door with my hands like a true rebel.
Seriously, I'd just throw the tub of ice at it till it gives.
I'm saddened a bit, I was hoping I'd be able to scroll down page one and see a paragraph of "Well, once x interacts with y and forms 1, you can use t and u with 1 to make boom occur."
Same as Rebi. I was gonna say combine them all in the tub and put them in the beaker and squirt it on the handle thus melting the lock mechanism and opening the escape route.
Shit, what if it's a panic room?
[QUOTE=evlbzltyr;30210126]If you're "not allowed" to apply direct force to the door, then that gives the impression that someone's watching the events take place inside the room. So what I'd do would be to pretend to drink one of the chemicals, cough, fall over and pretend to fall unconscious / die. Then, when someone comes to collect my "body", I take out the steel bar and bash their brains out, before making my escape. Foolproof.[/QUOTE]
You win.
That's like, i didn't even think of that.
[editline]3rd June 2011[/editline]
[QUOTE=Higuys;30213932]Same as Rebi. I was gonna say combine them all in the tub and put them in the beaker and squirt it on the handle thus melting the lock mechanism and opening the escape route.
Shit, what if it's a panic room?[/QUOTE]
That's a way. Nobody has gotten the true way to do it yet.
[editline]3rd June 2011[/editline]
[QUOTE=credesniper;30213263]I'm saddened a bit, I was hoping I'd be able to scroll down page one and see a paragraph of "Well, once x interacts with y and forms 1, you can use t and u with 1 to make boom occur."[/QUOTE]
That's the point, but nobody has done it yet. First person to get the REAL reason i say, with exact instructions ( explicit ones ), i'll paypal you 2 dolla! seriously.
[QUOTE=LauScript;30225204]That's the point, but nobody has done it yet. First person to get the REAL reason i say, with exact instructions ( explicit ones ), i'll paypal you 2 dolla! seriously.[/QUOTE]
:toxx:
[QUOTE=Dirf;30226382]:toxx:[/QUOTE]
?
It it was my room I'd be trapped in, I'd simply burn the door.
[QUOTE=DatWut?;30226651]It it was my room I'd be trapped in, I'd simply burn the door.[/QUOTE]
With, how.
Well, if the door was made of sodium I'd add the 99% concentration of glyceralgehyronic red fluid to the 99% concentration of hyperbolaboricsluphuricmethalane and then mix the glycerin with the above glyceralgehyronichyperbolaboricsluphuricmethalane mixtrue to become glyceralgehyronichyperbolaboricsluphuricmethalaneglycerin. This can then be poured over the door which makes a compound called glyceralgehyronichyperbolaboricsluphuricmethalaneglycerinsodium which would burn through the door easily.
Fuck if I know what to do if it's made of something else, though.
ROFL
[QUOTE=LauScript;30227123]ROFL[/QUOTE]
There is a funny rating for a reason.
:frog:
[QUOTE=LauScript;30227123]ROFL[/QUOTE]
A++ Post
[QUOTE=LauScript;30226556]?[/QUOTE]
It's the Toxx clause. Basically, it states that if the thing you said happens, you have to follow through with it or you get perm-banned. I don't think it counts in this regards though because of variables and etc. I don't think any mods even go through with it anymore.
sv_cheats 1
noclip
[quote]1.Fill a 75-milliliter beaker to the 13 mL. Level with fuming red nitric acid, of 98% pure concentration.
2.Place the beaker in an ice bath and allow to cool below room temp.
3.After it has cooled, add to it three times the amount of fuming sulferic acid (99% h2so4). In other words, add to the now-cool fuming nitric acid 39 mL. Of fuming sulferic acid. When mixing any acids, always do it slowly and carefully to avoid splattering.
4.When the two are mixed, lower their temp. By adding more ice to the bath, about 10-15øC. (Use a mercury-operated thermometer)
5.When the acid solution has cooled to the desired temperature, it is ready for the glycerin. The glycerin must be added in small amounts using a medicine dropper. (Read this step about 10 times!) Glycerin is added slowly and carefully (I mean careful!) Until the entire surface of the acid it covered with it.
6.This is a dangerous point since the nitration will take place as soon as the glycerin is added. The nitration will produce heat, so the solution must be kept below 30øC! If the solution should go above 30øC, immediately dump the solution into the ice bath! This will insure that it does not go off in your face!
7.For the first ten minutes of nitration, the mixture should be gently stirred. In a normal reaction the nitroglycerin will form as a layer on top of the acid solution, while the sulferic acid will absorb the excess water.
8.After the nitration has taken place, and the nitroglycerin has formed on the top of the solution, the entire beaker should be transferred slowly and carefully to another beaker of water. When this is done the nitroglycerin will settle at the bottom so the other acids can be drained away.
9.After removing as much acid as possible without disturbing the nitroglycerin, remove the nitroglycerin with an eyedropper and place it in a bicarbonate of soda (sodium bicarbonate in case you didn't know) solution. The sodium is an alkali and will neutralize much of the acid remaining. This process should be repeated as much as necessary using blue litmus paper to check for the presence of acid. The remaining acid only makes the nitroglycerin more unstable than it already is.
10.Finally! The final step is to remove the nitroglycerin from the bicarbonate. His is done with and eye- dropper, slowly and carefully. The usual test to see if nitration has been successful is to place one drop of the nitroglycerin on metal and ignite it. If it is true nitroglycerin it will burn with a clear blue flame.[/quote]
You get nitroglycerin, which you put in a vial and throw at the door.
I expect more than 2 dollars.
keep throwing steel bar at door
Place couch next to wall....Start it on fire
I'd mix all the chemicals together in hopes of a large explosion.
Nitrate that glycerin using the nitric acid and sulfuric acid, the bunsen burner, the thermometer, and the ice+water for a ice water bath.
Sorry, you need to Log In to post a reply to this thread.