I screwed up my acf installation somehow. The public car has errors on it, presumably acf. My own acf car, when in public server works fine. Errors for me in singleplayer though. Followed the installation instructions to the letter but still don't think it's correct. Please help me out.
I was using the old method of having seperate ACF models folder and ACF folder in addons. The new instructions seems only need 1 ACF folder in addons.
[QUOTE=Flyingtaco;35424422]I found out that the public car has a rear thruster stabilizer on it! This must be stopped at once.[/QUOTE]
yeah it does, but it's not being used to propel the vehicle. it's there so i could fine-tune the over/understeer
[QUOTE=Amplar;35326171] Only acf is allowed to power the vehicle; no thrusters, applytorque, etc,[/QUOTE]
I must have understood this as including the aforementioned thruster
would an apply torque based sterring system be allowed, generaly what I do is that instead of using hydraulics to rotate the front wheels I will use apply torque to give me a bit more control over the angle, just wondering as its not used to propel the car
[QUOTE=viperfan7;35434757]would an apply torque based sterring system be allowed, generaly what I do is that instead of using hydraulics to rotate the front wheels I will use apply torque to give me a bit more control over the angle, just wondering as its not used to propel the car[/QUOTE] Yes, as long it's not propelling the car, just for the turning, it's ok. Karbines premade car has a e2 for the turning.
[b] i need everyone who's going to be in the race this weekend to state that you're going to be there and what times you have available this weekend. we can run the races on sat or sunday.[/b]
DDDDDDDD, DDDD.
I may not make it on Sunday, so here's my car just in-case.
[url]http://gyazo.com/737eb050f9af49c31b6b47891e625b0b[/url]
[url]http://gyazo.com/8954083d1718901d3d3390b67af474b3[/url]
[url]http://gyazo.com/e6335060a6a50e2b3d6dba36e631aae5[/url]
[url]http://gyazo.com/13ca9a95ff34d5369c51d0af3ffc0717[/url]
[url]http://gyazo.com/b7cdf506bc6c3c7a0870d7d7a8bde708[/url]
I might show up but I only have a class 2 car. Can I race it and just not have it ranked?
[QUOTE=parsch5;35447875]DDDDDDDD, DDDD.
I may not make it on Sunday, so here's my car just in-case.
[url]http://gyazo.com/737eb050f9af49c31b6b47891e625b0b[/url]
[url]http://gyazo.com/8954083d1718901d3d3390b67af474b3[/url]
[url]http://gyazo.com/e6335060a6a50e2b3d6dba36e631aae5[/url]
[url]http://gyazo.com/13ca9a95ff34d5369c51d0af3ffc0717[/url]
[url]http://gyazo.com/b7cdf506bc6c3c7a0870d7d7a8bde708[/url][/QUOTE]
wow, wasn't expecting something of that quality. well done.
[QUOTE=Amplar;35447768][b] i need everyone who's going to be in the race this weekend to state that you're going to be there and what times you have available this weekend. we can run the races on sat or sunday.[/b][/QUOTE] I WILL BRO, COUNT ME IN!
Was going for a BMW E30 325I, didn't end like it.
[img]http://i1077.photobucket.com/albums/w479/neolite112/gm_drivingmap_mk1-95_beta0064.jpg[/img]
[img]http://i1077.photobucket.com/albums/w479/neolite112/gm_drivingmap_mk1-95_beta0061.jpg[/img]
[img]http://i1077.photobucket.com/albums/w479/neolite112/gm_drivingmap_mk1-95_beta0062.jpg[/img]
[img]http://i1077.photobucket.com/albums/w479/neolite112/gm_drivingmap_mk1-95_beta0060.jpg[/img]
[code]
Specifications for "BMW E30 325I":
Mass: 1244 KG
Engine: ACF 1600cc Inline 4
Redline: 8000 RPM
Power: 112 HP @ 6500 RPM (Not tested)
Torque: 92 FT LBS @ 3900 RPM (Not tested)
Max speed: 90 mph
0-65 MPH: 7 sec
Braking, 60-0: 42 FT (Not tested)
Gearbox: 5 forward, 1 reverse
Tires: 4x Jeeptire @ 80kg ea.
Suspension: 4 wheel independent
Prop amount: 151
Cons amount: --- (Dunno what this is)
Server IN: 400-500
Lag rating: Small-Moderate
[/code]
I'd like to join but are all the groups racing?
I kinda fucked up on my car so I ended up having to make it a group 3.
if all groups are racing I'd probably be around anywhere from 10am to 1am GMT+1 on saturday and 10am to 10pm on sunday.
Are multiple engines allowed (2x 2.2l i6)?
If you could, it would only be for Group 3 vehicles. Still would be good to get confirmation from Karbine, but he doesn't seem like he's keeping up with this thread much.
My entry
A 1.6L '82 VW Jetta
[IMG]http://img14.imageshack.us/img14/5289/gmdrivingmapmk195beta00.jpg[/IMG]
[IMG]http://img710.imageshack.us/img710/5289/gmdrivingmapmk195beta00.jpg[/IMG]
[IMG]http://img96.imageshack.us/img96/5289/gmdrivingmapmk195beta00.jpg[/IMG]
[IMG]http://img62.imageshack.us/img62/2259/gmdrivingmapmk195beta00v.jpg[/IMG]
[IMG]http://img404.imageshack.us/img404/5289/gmdrivingmapmk195beta00.jpg[/IMG]
Specs:
[code]
Class: 1
Mass: 1287 KG
Engine: ACF 1600cc Inline 4
Redline: 8000 RPM
Power: 112 HP @ 6500 RPM (Not tested)
Torque: 92 FT LBS @ 3900 RPM (Not tested)
Max speed: 70 mph
0-65 MPH: 6.6 sec
Braking, 60-0: 96 FT
Gearbox: 5 forward, 1 reverse
Drivetrain: FWD
Dimensions: 3170mm x 1160mm x 1030mm
Tires: 4x Rubbertire @ 50kg ea.
Suspension: 4 wheel independent, 8in travel
Prop amount: 142
Server IN: 500-600
Lag rating: Moderate
[/code]
I would attempt to make a car to enter this, but ACF messes up my Smart-Snap. Does anyone know if there is a fix for it? It's hard to describe, it makes everything that I use the easy<weld/axis/ballsocket/etc> tool with...offset? I can't explain it, I can make a video if you have no idea what I mean.
[QUOTE=Guy123;35468109]I would attempt to make a car to enter this, but ACF messes up my Smart-Snap. Does anyone know if there is a fix for it? It's hard to describe, it makes everything that I use the easy<weld/axis/ballsocket/etc> tool with...offset? I can't explain it, I can make a video if you have no idea what I mean.[/QUOTE]
you have to delete battlepod.lua, but I think it is fixed on the latest SVN.
gonna host the races on sunday, probably gonna run the event most of the day; just come by (or message me on steam) when you want to run your time.
You're hosting the races on Easter...?
i don't have a choice unless you want to do it on monday
i won't be back till late today (it's 1pm pst, be back probably 8 hours?)
if you want to do a run, message me when i get back and you can run today.
anyone racing today; just message me on steam or go on the dong den ( 74.63.197.181:27015 ) for your run!
isn't anyone fucking coming
i try to run these events and no one ever shows
GROUP 1 IS FIRST EVENT
I mean, I actually had a truck for group 3 that could hit 100mph and did 0-60 in around 8 seconds, even though it weighed quite a bit (neighborhood of 4000?).
rally's going good; we've had 4 people compete for stage 1, and possibly 2 more entries tomorrow. doing this in 2 days because of easter and shit.
I meant to participate in this, but I haven't had time to screw around with E2 to get a gearshift going. I'll get on that soon.
Are we allowed to compete if everything we make is ugly as hell?
[IMG]http://img.photobucket.com/albums/v260/NitSud/2012-04-09_00007.jpg[/IMG]
[IMG]http://img.photobucket.com/albums/v260/NitSud/2012-04-09_00006.jpg[/IMG]
[IMG]http://img.photobucket.com/albums/v260/NitSud/2012-04-09_00005.jpg[/IMG]
ahahaha +10 internets to whoever can guess what inspired that horrifying thing. Literally the first semi-realistic 'car' I've ever tried making. Could have been worse, no?
Also I have no idea how to set up dat makespherical shi without it going OH GOD OH FUCK OH GOD
It's a Studaporsche 911
[editline]9th April 2012[/editline]
ish
[editline]9th April 2012[/editline]
thing
[QUOTE=MrWhite;35504526]It's a Studaporsche 911
[editline]9th April 2012[/editline]
ish
[editline]9th April 2012[/editline]
thing[/QUOTE]
austin maxi 911
[editline]9th April 2012[/editline]
wow that's miserable ahahaha
ahaha, yes, I originally saw a 1963 911, thought it had nice design and started trying to replicate it. I then somehow got onto the page for a Supra, and that progressed to a Golf MKIII, then to a Fastback, then to a fucking 1960 Bentley where I was like "Long hood is long!"
I call it the 912th SupGo-
No.
SuGoesFast -
No.
Su aw fuck this shit
At first glance the rear looked like early-mid 20th century luxury car to me.
Sorry, you need to Log In to post a reply to this thread.
