Post Your Current WIP: V6 "I will stroke a doll. You will benny fit!"
3,015 replies, posted
https://files.facepunch.com/forum/upload/173551/3b771480-9faa-4f4c-9005-fc5526b7d900/gm_carcon_ci0001.jpg
https://files.facepunch.com/forum/upload/173551/5732bd01-ada8-434b-a662-90fd910f57b2/gm_carcon_ci0002.jpg
Ok this is my first body car, and it has 2x 2.0L rotarys. It has 284 Hp i like how it turned out and can anyone provide some feedback on how i did or tips?
Hey folks I have a little question about angles. Say I spawned a prop and rotated it arbitrary, well is there a way to see the angle of that prop? Via PA or something?
Right click the prop with PA. Hit your "R" key, click the "Rotation" tab, and then click "Get Angles".
maybe its just me but when i do my swing arms i tend to not give them that wide of a radius, but idk looks fine eiether way
Thanks!
I made a boat.
https://files.facepunch.com/forum/upload/176937/43182f0d-769d-4e8a-89c0-af306e63469a/hl2_2018-03-01_20-45-00.jpg
Second Build: Its a Rock Crawler/Rock Bouncer. (Older Type) It has Solid Axle Suspension with a 350+ WHP V8.
https://files.facepunch.com/forum/upload/173551/8221c55a-aa4d-4893-a1fd-1ee0a1dcaaaa/gm_carcon_ci0012.jpg
https://files.facepunch.com/forum/upload/173551/5734e570-8e89-42a2-ad6a-64dea9f547c5/gm_carcon_ci0013.jpg
https://files.facepunch.com/forum/upload/173551/240dbcc0-8531-4304-b182-4bc115340964/gm_carcon_ci0014.jpg
https://files.facepunch.com/forum/upload/173551/db78297b-9d84-4639-8ce0-ab34bb1d0734/gm_carcon_ci0015.jpg
Got Bored so i built a 80 Hp Twin Turbo Lawn Mower. This was just a time killer. it took about 30 minutes to complete.
https://files.facepunch.com/forum/upload/173551/3ff97bde-063c-41fe-944c-1d4bde9cc043/gm_carcon_ci0019.jpg
https://files.facepunch.com/forum/upload/173551/41b931d1-d0e5-429b-aefa-f953bd4586cd/gm_carcon_ci0017.jpg
https://files.facepunch.com/forum/upload/173551/96344499-aacd-44d1-9d54-dd153d6fca7a/gm_carcon_ci0018.jpg
hey so i made a shitty tut explaining how to visclip by plane using PA and plates since a lot of people have been asking questions on how to do it and what the benefits are.
https://www.youtube.com/watch?v=MA5D2xjBJhM
Maybe you add this to the front page tuts.
New forum new account? Can't keep my old one?
Anyway, been a while! Lately I have been playing around with engine simulation again, some of you have seen me driving my thousands of ops e2 around on cre8ive. It's basically ACF engines but does some different stuff with the math. It does flywheel inertia and engine braking and open differential and everything! And no auto clutch, though that might change to keep things from going crazy/negative. Was always trying to solve "the flywheel problem" back in the day, recently randomly had some ideas and I think I got this thing working pretty well. Still lots of work to do though. Been slowly translating to lua over the past couple weeks. Right now it basically steals models sounds and engine definitions straight from ACF if it's installed, not sure if that will stay or if I'll make up my own or just go all custom everything. And I don't think I want to make it as flexible as ACF is with its multiple engine/gearbox linking system. One output goes to one input. Thinking I'll call it ESM for Engine Simulator Mod
Would anyone be interested if I made this a thing? Like on a scale from 1 to 10? (especially build server owners lol)
i am at it again
https://steamuserimages-a.akamaihd.net/ugc/922548032612137230/67584C217D9B5C838AD64F4ABE67FB8D12BFBE47/
delicious
Super early crewed Hetzer WIP
https://steamuserimages-a.akamaihd.net/ugc/925925732332679034/7BB9F7521429BD9A094A2E1D890159AF0EFDEE66/
https://steamuserimages-a.akamaihd.net/ugc/925925732332679575/0B4FDFDACF2E0F0F1B392CCD1AAE1607E764DE6A/
https://steamuserimages-a.akamaihd.net/ugc/925925732332680104/18DE87AD1A2475E4A0ACCD0133CDF4DF1192DB7D/
Does anyone know of an issue where you have to rewire hydraulics for a car every time you spawn it? My hydros don't want to update and I end up having to rewire them every time I spawn the car
I use this for my hydro's and it seems to get around that.
if(first()|dupfinished()){
hydrostuff
}
Interiors hey?
https://steamuserimages-a.akamaihd.net/ugc/928177532156570015/ECC4F2D382E3B73D13A42062066A55D7DD860AF9/
and a picture of my T90A I took.
https://steamuserimages-a.akamaihd.net/ugc/928177532156775322/4939BE79CC88A622A15E2B9886E9EADF37227DC0/
Interior looks nice but it looks like a fallout inside xD
Progress on KITT
https://i.imgur.com/fIHHseX.png
https://i.imgur.com/pKKYXSo.png
https://i.imgur.com/lqNydak.png
https://i.imgur.com/ObudvSp.png
https://i.imgur.com/gwlQ9ac.png
https://i.imgur.com/qo1hfz0.png
https://i.imgur.com/OMdGe8A.png
https://i.imgur.com/8KP0rmh.png
It has more abilities but it would take way too many images to show
Yes I got it, I didnt know that was an m1a1 interior. I only know cheese made an m1a2. lol
S u b a r u 222 props so far
https://steamuserimages-a.akamaihd.net/ugc/930429696659469207/41B06AF3A16D4BBA2F207DEB16A6E04AE7A6E27D/
https://steamuserimages-a.akamaihd.net/ugc/930429696659469573/36138978141E00DF3552AC8AF78D0566ECB0864E/
So after of a bit of a hiatus, I felt we needed more Interwar/Early WWII stuff. So I made this:
https://steamuserimages-a.akamaihd.net/ugc/927052361574203500/8204D927EF17D5BD11D1F1DF72911041B28AC9BB/
13 tonnes, 156hp (Inline 4), 10-50mm armor, and she putters along just nicely.
Of course I added the obligatory rear-french-trenchcrosser-thing
So I have a question for you wippers and builders - I thought about making a tool called 'Keyboard Controller' that lets you 'become your contraption'. It's basically a button like entity that you can activate by pressing E on - once activated your standard WASD/Jump/Duck/Mouse movements are redirected/translated to standard keyboard input controls (like the numpad). So by pressing W it would be equivalent to press '8' to move your contraption forward, or moving your mouse would move a turret/camera/whatever, etc... and pressing E again will disable the controller and give back users their control over the player himself.
Do you see this as a tool you'd use? Are there similar tools/alternatives?
Most of us here use wiremod for contraptions, which has a keyboard tool similar to what you're describing but it's a bit more difficult to use. The mouse part sounds useful and I imagine less experienced builders would find it very useful for controlling vehicles made with the default gmod tools.
What'd be the difference between this and a seat/pod controller? I don't see the difference.
Didn't know something like that existed, so I asked. Also, the difference would probably be that you don't have to be sitting in some vehicle, not that it should matter.
We had a tool called vehicle control unit back in like 2006-08 that did this until wiremod came about with the pod controller/numpad outputs. It's not something that's really needed unless your server doesn't have wiremod.
What's the general acceptance of stuff like PAC3 works in here?
Started playing Gmod again recently with a buddy and felt like giving PAC a try being amazed at all the stuff you can do with it, so originally I just made a little combine bomb sphere "follower"
A day later I thought about upgrading it and made the ID-10 droid from SW Battlefront 2017, with a jigglebone aswell so it bops around and lags behind a bit when you move. It's 99% PHX props except for the big eye which is the combine bomb, flattened a bit with model clips applied to hide the rest of the ball
https://i.gyazo.com/62600fafe091f41f927247cfad556f17.png
https://i.gyazo.com/1b84463e3d638c8f53a78ef26a61155a.png
https://i.gyazo.com/5cf360c5d69bfbf0514b0f515abc58ec.jpg
https://i.gyazo.com/fda85cb5d01d724b82067c41f129199b.png
This is predominatley for contraptions but theres a PAC3 thread knocking around here somewhere. I cant quite find it atm because I'm on my phone.
Very good PAC though I must say.
Sorry, you need to Log In to post a reply to this thread.
Post Your Current WIP: V6 "I will stroke a doll. You will benny fit!"
