• The "Quick Questions that does not Deserve a Thread"...Thread. V2
    6,427 replies, posted
Computer name can be set via right clicking Computer, properties, somewhere on there. New account should be easy to set up. Ninite can handle flash, java, other programs, and drivers can be scanned for at any time, just not sure how to do it in 7. Are you just going to be giving it to them as-is, or removing everything first? If you're going to do that you may as well just reinstall windows. If you can do the name change, etc for them it would be much easier than trying to activate the first-start process.
What is the best writing tablet to get under £20? For like MS paint drawings or photoshop drawings.
I have a XFX 6950 and I have three screens that I want to use. One of them is a TV hooked up via an HDMI to MiniDisplayPort. The other two are DVI monitors. I can't seem to get all three going at the same time. It only allows me to use two at a time. Is there anyway I can get three going?
[QUOTE=30CALIB3R;29975422]I have a XFX 6950 and I have three screens that I want to use. One of them is a TV hooked up via an HDMI to MiniDisplayPort. The other two are DVI monitors. I can't seem to get all three going at the same time. It only allows me to use two at a time. Is there anyway I can get three going?[/QUOTE] You need an active DP-HDMI/DP-DVI converter or any DP-VGA converter for one of the monitors/TV. If you go the cheaper VGA route, watch out for limited resolution and refresh rate support (much lower than VGA would have normally).
What's the discernible difference between these two cards, and is it worth $100 more? [URL]http://www.amazon.com/EVGA-Superclocked-PCI-Express-Graphics-01G-P3-1373-AR/dp/B003VWZEBY/ref=sr_1_2?ie=UTF8&qid=1306025444&sr=8-2[/URL] [URL]http://www.amazon.com/EVGA-GeForce-PCI-Express-Graphics-01G-P3-1366-TR/dp/B004DKWLB4/ref=sr_1_1?ie=UTF8&qid=1306025444&sr=8-1[/URL]
[QUOTE=Derpmeifter;29964481]Computer name can be set via right clicking Computer, properties, somewhere on there. New account should be easy to set up. Ninite can handle flash, java, other programs, and drivers can be scanned for at any time, just not sure how to do it in 7. Are you just going to be giving it to them as-is, or removing everything first? If you're going to do that you may as well just reinstall windows. If you can do the name change, etc for them it would be much easier than trying to activate the first-start process.[/QUOTE] I did reinstall, installed everything, then wanted to have it run the first time boot thing. I just ended up doing what you said though.
[QUOTE=Shadaez;29950708]Antenna? Satellite? Yeah, it won't ever be much better than that.[/QUOTE] Our router is connected to some place in town via an antenna.
[QUOTE=Darrylop;29976532]What's the discernible difference between these two cards, and is it work $100 more? [URL]http://www.amazon.com/EVGA-Superclocked-PCI-Express-Graphics-01G-P3-1373-AR/dp/B003VWZEBY/ref=sr_1_2?ie=UTF8&qid=1306025444&sr=8-2[/URL] [URL]http://www.amazon.com/EVGA-GeForce-PCI-Express-Graphics-01G-P3-1366-TR/dp/B004DKWLB4/ref=sr_1_1?ie=UTF8&qid=1306025444&sr=8-1[/URL][/QUOTE] Um, it's $50 more and yes.
[QUOTE=Darrylop;29976532]What's the discernible difference between these two cards, and is it work $100 more? [URL]http://www.amazon.com/EVGA-Superclocked-PCI-Express-Graphics-01G-P3-1373-AR/dp/B003VWZEBY/ref=sr_1_2?ie=UTF8&qid=1306025444&sr=8-2[/URL] [URL]http://www.amazon.com/EVGA-GeForce-PCI-Express-Graphics-01G-P3-1366-TR/dp/B004DKWLB4/ref=sr_1_1?ie=UTF8&qid=1306025444&sr=8-1[/URL][/QUOTE] Those are both bad deals, the SE is way worse. Use newegg, you can get a GTX 460 1GB card fo $160
[QUOTE=Shadaez;29978037]Those are both bad deals, the SE is way worse. Use newegg, you can get a GTX 460 1GB card fo $160[/QUOTE] True. Amazon has terrible prices on stuff like that.
With rebate its $110
Same one for $170 [url]http://www.newegg.com/Product/Product.aspx?Item=N82E16814130571[/url] Same card from a value brand (same performance, well a little less since it's not super clocked but that's not worth an extra $14) [url]http://www.newegg.com/Product/Product.aspx?Item=N82E16814500202[/url] and if you're not afraid of an open box: [url]http://www.newegg.com/Product/Product.aspx?Item=N82E16814127510R[/url]
[QUOTE=Darrylop;29978071]With rebate its $110[/QUOTE] Thats the SE It's not very good Also, same price on newegg [url]http://www.newegg.com/Product/ProductList.aspx?Submit=ENE&DEPA=0&Order=BESTMATCH&Description=460+SE&x=0&y=0[/url]
Where I live, shipping is horrible from newegg.
What if everything in my network was up to CAT6 standards, although the network cards on the PC's only went up to 100mbps, would it slow down the whole network to only 100mbps? Would there be a speed mismatch? I don't mind about it being bottlenecked for a bit, but if it can't function entirely then I'll just wait until I can get some better NIC's. Here's a shit wiring diagram. I'm planning on upgrading the NIC's to gigabit standards but they're going to have to be 100mbps for now. [img]http://dl.dropbox.com/u/19779215/Photos/Facepunch/schematic.png[/img] Ah, forgot to omit "or CAT5" disregard it please.
[QUOTE=Amez;29979244]What if everything in my network was up to CAT6 standards, although the network cards on the PC's only went up to 100mbps, would it slow down the whole network to only 100mbps? Would there be a speed mismatch? I don't mind about it being bottlenecked for a bit, but if it can't function entirely then I'll just wait until I can get some better NIC's. Here's a shit wiring diagram. I'm planning on upgrading the NIC's to gigabit standards but they're going to have to be 100mbps for now. [img]http://dl.dropbox.com/u/19779215/Photos/Facepunch/schematic.png[/img] Ah, forgot to omit "or CAT5" disregard it please.[/QUOTE] Considering you only have 100mbps NICs, you will only get 100mbps transfer speed within your network for now. But everything will still work fine.
[QUOTE=Johnbooth;29979892]Considering you only have 100mbps NICs, you will only get 100mbps transfer speed within your network for now. But everything will still work fine.[/QUOTE] Alright good, thanks!
i tried downloading impulse(for SoSE) and i can't because "windows installer can't be accessed"
[QUOTE=acidcj;29945760]What's your budget? You might want to make a thread in the PC building section[/QUOTE] Budget right now is around 700-800 euro limit.
What is the general opinion on these? [url]http://www.scan.co.uk/products/wolf-king-dk-2388u-warrior-blue-circular-gaming-keyboard-usb-wired-blue[/url]
I think they're awesome. I have a zboard fang, that one looks much better, to me, being close to what the left side of the keyboard looks like.
What would the best tool to format a drive be? I still need to get that external drive formatted to Fat32
HOW THE HELL DO I ROOT MY MOTOROLA DEFY?! Z4Root does not work. I cannot find the rooting .zip folder anywhere online :c
[QUOTE=kaze4159;29984644]What would the best tool to format a drive be? I still need to get that external drive formatted to Fat32[/QUOTE] Just use Windows. Right click the drive in "Computer" and click format.
Question: What is a better, easier program. Autodesk Mudbox Or ZBrush??
[QUOTE=the_grul;29985573]Just use Windows. Right click the drive in "Computer" and click format.[/QUOTE] Can't, the only options are exfat or NTFS
Quick question here: A folder I have suddenly decided to have a lock on it's icon. I can access the folder just fine, and nothing has changed, but I'd like the lock to go away, since it annoys me. [img]http://gyazo.com/ca6662dd2f4a2e54dcbdd43d3dc80063.png[/img] What can I do?
So how am i going to do this? I'll order another 1TB drive, and run RAID1. Two partitions? BIOS/7 raid? Eeeh
For some reason HD videos have started lagging on my laptop. Never had problems with it before. Anyone knows what I can do? I'm using MPC
I can't find the old thread that featured a program that mapped your hard drive and displayed what takes up space graphically. Does anyone recall?
Sorry, you need to Log In to post a reply to this thread.