No. I'll get smart readings on USB external drives but not on SATA/eSATA.
[editline]03:47AM[/editline]
Tried booting into linux as well, nothing
[QUOTE=whatnow V2;21710335]what CPU? are the sensors broken/nonexistent?[/QUOTE]
AMD Phenom II x2 550 Black Edition. The sensors used to show the temps until I unlocked the CPU (that's how it is for everyone who unlocks). Now it's recognized as a Phenom II x4 B50.
[QUOTE=culexor;21719376]AMD Phenom II x2 550 Black Edition. The sensors used to show the temps until I unlocked the CPU (that's how it is for everyone who unlocks). Now it's recognized as a Phenom II x4 B50.[/QUOTE]
Phenom II x4 B50
[img]http://www.facepunch.com/image.php?u=141490&dateline=1272054618[/img]:hf:[img]http://www.facepunch.com/image.php?u=253710&dateline=1271795808[/img]
[code] CPUID Hardware Monitor 1.1.4.0
-----------------------------------------------------
Mainboard Vendor Dell Computer Corporation
LPCIO
-----------------------------------------------------
Vendor SMSC
Vendor ID 0x55
Chip ID 0x10
Config Mode I/O address 0x2E
Dump config mode register space, LDN = 0x9
0 1 2 3 4 5 6 7 8 9 A B C D E F
00 00 00 00 00 00 00 00 09 00 00 00 00 00 00 00 00
10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20 10 11 18 00 54 04 2E 00 00 00 00 00 00 00 00 00
30 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60 09 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Hardware monitor
-----------------------------------------------------
ACPI hardware monitor
Temperature sensor 0 43°C (108°F) [0xC55] (THM_)
Dump hardware monitor
Hardware monitor
-----------------------------------------------------
FUJITSU MHS2040AT D hardware monitor
Temperature sensor 0 49°C (120°F) [0x31] (HDD)
Dump hardware monitor
Processors Map
------------------------------------------------------------------------------------
Number of processors 1
Number of threads 1
Processor 0
-- Core 0
-- Thread 0
Processors Information
------------------------------------------------------------------------------------
Processor 1 (ID = 0)
Number of cores 1 (max 1)
Number of threads 1 (max 1)
Name Intel Pentium M
Codename Banias
Specification Intel(R) Pentium(R) M processor 1600MHz
Package Socket 479 mPGA (platform ID = 5h)
CPUID 6.9.5
Extended CPUID 6.9
Brand ID 22
Core Stepping B1
Technology 0.13 um
Core Speed 1598.6 MHz (16.0 x 99.9 MHz)
Rated Bus speed 399.7 MHz
Stock frequency 1600 MHz
Instructions sets MMX, SSE, SSE2
L1 Data cache 32 KBytes, 8-way set associative, 64-byte line size
L1 Instruction cache 32 KBytes, 8-way set associative, 64-byte line size
L2 cache 1024 KBytes, 8-way set associative, 64-byte line size
FID/VID Control yes
FID range 6.0x - 16.0x
max VID 1.484 V
Features
[/code]
Fucking Laptops idling at 50c...
Anyone know why my GPU won't show up on HWMonitor anymore? It use to last year but for some reason it disappeared off the face of temperature monitors
[QUOTE=ExplodingGuy;21687130]I typically have it at 1366x768 when I feel like running at VH, but to run in 1080p I have to set it everything but the texture and object quality down to high/medium.
And if it really matters, I can push it to run at 1080p with VH settings, but she becomes a real fickle bitch to use. I'm talking about around 8-20 frames. So I don't do that very often.
[B]EDIT: [/B]
The GTS 240 is more flexible than most think, you just got to know what and what not to do.[/QUOTE]
Bullshit. I pull 15-25 with my GTX 275 on the same resolution maxed with 4X AA with a PII X4 955 3.2 GHz. Either you're bullshitting or you're only telling half the story.
Not like AA actually looks good in Crysis to begin with unless you really tweak the shit out of it. I get 25-35 with it off.
[QUOTE=whatnow V2;21756559]only 4? booo[/QUOTE]
4GHz? The board can't take any more than roughly 4GHz stable, I've been up to 5GHz or thereabouts, but it's not stable, enough for some SuperPi though.
cpu-z pls
[QUOTE=whatnow V2;21756806]cpu-z pls[/QUOTE]
I run Linux now, it doesn't exist on Linux.
Mega revive. I don't know If i will take shit or not but, I didn't think it was almost a year ago since last post and this thread could be used again.
My 570 has a really nice idle temp, it's the reference cooler. It's rather warm in my room to.
[img]http://localhostr.com/files/qzSTFdE/CPUID%20Hardware%20Monitor.png[/img]
Case: 29.9C
Processor: ~34.5C (Unlocked Phenom II 555 to 955, no internal temp sensors. Relying on an external sensor, so its a rough estimate, somewhere within 5C)
GPU1: 57C (Second card is little bit close to the first, kinda bad airflow there.)
GPU2: ~40C (This one's a total guess, half the time my second 5770 doesn't want to report a temp in CCC...)
That's all idling. Under load processor only goes up 5C at the max, GPU1 I've never looked at, GPU2 will match the first when it's running F@h by itself. Dunno bout in game or whatnot, I only really look at the processor and case then.
I highly doubt these temperatures are normal.
[IMG]http://i53.tinypic.com/29bhp47.jpg[/IMG]
pII amd 965 (unlocked athlonII 620- early yield; very rare!)
TMPIN0 - cpu heatsink; core temps frozen cuz of unlock
check out ADT7475!
[img]http://i.cubeupload.com/tzhPOJ.png[/img]
My Macbook is currently at 160 degrees Fahrenheit.
[editline]27th April 2011[/editline]
180
[QUOTE=Bob The Poster;29474979]I highly doubt these temperatures are normal.
[img_thumb]http://i53.tinypic.com/29bhp47.jpg[/img_thumb][/QUOTE]
If that's with overclocks and under slight load, it's totally normal.
And i guess the CPU Vcore is lying ?
These are my temps:
[img_thumb]http://gyazo.com/20b49d8032a36a5a7217cf0c64be6a77.png[/img_thumb]
Intel Core I7 920 @4Ghz (21x190)
Club3D Radeon HD5830 1Gb
Sorry, you need to Log In to post a reply to this thread.
