[QUOTE=TheBuffalo13;16705135]That tiny bored in that case is just HILARIOUS.[/QUOTE]
Yumyumbublegum's micro-ATX board in a HAF 932 is even better.
Oh god yes, those cute little boards in those huge ass cases are just a ball breaker.
Does anyone know how many cans of paint are usually required to paint just the inside of an average PC case?
[QUOTE=TheBuffalo13;16706885]Oh god yes, those cute little boards in those huge ass cases are just a ball breaker.[/QUOTE]
Its a mid tower case, woohoo.
It's a mini atx, also woohoo.
it was cheap and i'm using it for movies.
also, THE FUCKING MOTHERBOARD CAME DOA
[QUOTE=Peavy262;16708098]Its a mid tower case, woohoo.
It's a mini atx, also woohoo.
it was cheap and i'm using it for movies.
also, THE FUCKING MOTHERBOARD CAME DOA[/QUOTE]
woohoo
[QUOTE=TrafficMan;16708378]woohoo[/QUOTE]
woohoo indeed.
Oh well, it only cost me 50 bucks.
[QUOTE=Durabeam;16707826]Does anyone know how many cans of paint are usually required to paint just the inside of an average PC case?[/QUOTE]
1 can.
[QUOTE=Peavy262;16708098]
also, THE FUCKING MOTHERBOARD CAME DOA[/QUOTE]
That's never fun.
That would ruin my day. Really.
[QUOTE=Thor667;16708674]1 can.[/QUOTE]
Then why does everyone have 3 or 4 cans of paint?
I understand needing primer, so what are the other ones for?
[editline]03:30PM[/editline]
Also, Garry needs to remove ratings.
[QUOTE=User.;16697524]or maybe the paint job looks like butt[/QUOTE]
Telling me the paint job is crappy is just like telling me that my heatsink isn't installed. It should be pretty obvious to you that I'm not completely done yet and I took the picture to show a WIP.
Thanks for the CC though. I didn't really notice the bad paintjob until the case was fully lit by a flash.
[editline]11:20AM[/editline]
[QUOTE=Durabeam;16716589]Then why does everyone have 3 or 4 cans of paint?
I understand needing primer, so what are the other ones for?
[editline]03:30PM[/editline]
Also, Garry needs to remove ratings.[/QUOTE]
Well, you need to prime (which takes 2 cans) and then you need to paint (which takes 2 cans)
[QUOTE=TheBuffalo13;16705135]That tiny bored in that case is just HILARIOUS.[/QUOTE]
[IMG]http://i357.photobucket.com/albums/oo18/yumyumbublegum/S30100013.jpg[/IMG]
[IMG]http://i357.photobucket.com/albums/oo18/yumyumbublegum/S30100033.jpg[/IMG]
:razz:
I would much rather agree with your dumb post then rate you dumb.
Cellphone pix ftl. @ work and forgot my camera :bang:
[img_thumb]http://i232.photobucket.com/albums/ee46/MaImpala/IMAGE_007.jpg[/img_thumb]
Sad when you have time to take your computer to work, drill the holes and do Cable management While on shift.
[QUOTE=FoxDonuT;16729417]Cellphone pix ftl. @ work and forgot my camera :bang:
[img_thumb]http://i232.photobucket.com/albums/ee46/MaImpala/IMAGE_007.jpg[/img_thumb]
Sad when you have time to take your computer to work, drill the holes and do Cable management While on shift.[/QUOTE]
Must work for the government.
[QUOTE=TrafficMan;16730723]Must work for the government.[/QUOTE]
:biggrin: Yep. I'm a Rink attendant for the civic Community arenas in my city. So theres quite a bit of downtime between Floods in the winter, and even more in the summer when im baby sitting a building for an event using the concrete floor. so i work on some projects in my free time. I DO earn my money though, alot of the projects are fixing small stuff around the arenas.
[QUOTE=FoxDonuT;16730796]:biggrin: Yep. I'm a Rink attendant for the civic Community arenas in my city. So theres quite a bit of downtime between Floods in the winter, and even more in the summer when im baby sitting a building for an event using the concrete floor. so i work on some projects in my free time.[/QUOTE]
5 points for me.
[QUOTE=FoxDonuT;16729417]Cellphone pix ftl. @ work and forgot my camera :bang:
[img_thumb]http://i232.photobucket.com/albums/ee46/MaImpala/IMAGE_007.jpg[/img_thumb]
Sad when you have time to take your computer to work, drill the holes and do Cable management While on shift.[/QUOTE]
Not bad...it's looking better than did it before.
Wait how big is a Antec 300? I dont want my mATX board to look stupid in it :am:
[QUOTE=Sgt Pringles;16736264]Wait how big is a Antec 300? I dont want my mATX board to look stupid in it :am:[/QUOTE]
Then get a Antec Mini P180
[QUOTE=Zorlok;16735122]Not bad...it's looking better than did it before.[/QUOTE]
Biggest thing was I DIDN'T want my power supply with the fan aiming down. But I gave in and flipped it. Just have to clean it more often. Everything Reaches now......
[QUOTE=FoxDonuT;16737261]Biggest thing was I DIDN'T want my power supply with the fan aiming down. But I gave in and flipped it. Just have to clean it more often. Everything Reaches now......[/QUOTE]
I was originally going to do that with mine, but then I'd want to cut a hole underneath for better ventilation. Most of my cords were more than long enough anyway, so I decided against it.
I broke down and cut the hole. Case looks violated cuz I didn't have a hole drill. :frown:
[IMG]http://i232.photobucket.com/albums/ee46/MaImpala/IMAGE_008.jpg[/IMG]
[QUOTE=FoxDonuT;16738947]I broke down and cut the hole. Case looks violated cuz I didn't have a hole drill. :frown:
[IMG]http://i232.photobucket.com/albums/ee46/MaImpala/IMAGE_008.jpg[/IMG][/QUOTE]
What did you use?
Dremel. Mine's half dead though, thats why its quite half assed. One day I'll Clean it up yet with a new dremel. Really no ones gonn see the hole. its underneath with a PSU covering it. Only I'm gonna know its there, and that crappily cut.
My OCZ Stealth extreme only had 16" cables and were still too short flipped. This ModXtreme has 18" cables, they work great with it flipped.
[QUOTE=FoxDonuT;16739092]Dremel. Mine's half dead though, thats why its quite half assed. One day I'll Clean it up yet with a new dremel. Really no ones gonn see the hole. its underneath with a PSU covering it. Only I'm gonna know its there, and that crappily cut.[/QUOTE]
I was just curious why you didn't just measure a square on the bottom of the case, and cut along the lines.
I'm a Ukrianian Handy man. We don't measure. :biggrin:
I did draw lines for a Octogon. Failed misurable with a un-cooperative Dremel.... :frown:
[QUOTE=FoxDonuT;16739154]I'm a Ukrianian Handy man. We don't measure. :biggrin:
I did draw lines for a Octogon. Failed misurable with a un-cooperative Dremel.... :frown:[/QUOTE]
It looks better than mine.
Hang on, i'll get a pic :)
[editline]06:58PM[/editline]
Here it is :)
Antec 900, rear fan cover removal... With a pair of needle-nose pliers!
Reason? Mounting a Scythe Mugen in my Case. Massive cooler with Push-pins below the metal fins. (I have large fingers)
Pic:
[media]http://imgkk.com/i/3VmbDS.jpg[/media]
Cut that out too. :c00l:
[IMG]http://i232.photobucket.com/albums/ee46/MaImpala/IMAGE_009.jpg[/IMG]
Sorry, you need to Log In to post a reply to this thread.
