ERROR: Bad Command { - Pain in the ass

Hey all,

Now, my StudioCompiler works fine, though the studiomdl.exe thats in the sourcesdk\bin\ep1\bin gives a “ERROR: Bad Command {” error, with studiocompiler or without(using a .bat file)…

I’ve tried everything:

  • Set game to EP1, didn’t work
  • Set game to Hl2, EP2, CSS, TF2, didn’t work
  • Open hammer and set the game to EP1, EP2, CSS, TF2, or HL2, didn’t work
  • Open model viewer, didn’t work at all, model viewer crashes for me.

I checked all files and there’s only 1 opening bracket, right here:


$collisionjoints "phymodel.smd" {
	$mass 90.0
	$inertia 10.00
	$damping 0.01
	$rotdamping 1.50
	$rootbone "valvebiped.bip01_pelvis"
	$jointmerge "ValveBiped.Bip01_Pelvis" "ValveBiped.Bip01_Spine1"

	$jointconstrain "valvebiped.bip01_spine2" x limit -48.00 48.00 0.00
	$jointconstrain "valvebiped.bip01_spine2" y limit -25.00 25.00 0.00
	$jointconstrain "valvebiped.bip01_spine2" z limit -25.00 50.00 0.00

	$jointconstrain "valvebiped.bip01_r_upperarm" x limit -39.00 39.00 0.00
	$jointconstrain "valvebiped.bip01_r_upperarm" y limit -79.00 95.00 0.00
	$jointconstrain "valvebiped.bip01_r_upperarm" z limit -93.00 23.00 0.00

	$jointconstrain "valvebiped.bip01_l_upperarm" x limit -30.00 30.00 0.00
	$jointconstrain "valvebiped.bip01_l_upperarm" y limit -95.00 84.00 0.00
	$jointconstrain "valvebiped.bip01_l_upperarm" z limit -86.00 26.00 0.00

	$jointconstrain "valvebiped.bip01_l_forearm" x limit 0.00 0.00 0.00
	$jointconstrain "valvebiped.bip01_l_forearm" y limit 0.00 0.00 0.00
	$jointconstrain "valvebiped.bip01_l_forearm" z limit -149.00 4.00 0.00

	$jointconstrain "valvebiped.bip01_l_hand" x limit -37.00 37.00 0.00
	$jointconstrain "valvebiped.bip01_l_hand" y limit 0.00 0.00 0.00
	$jointconstrain "valvebiped.bip01_l_hand" z limit -57.00 59.00 0.00

	$jointconstrain "valvebiped.bip01_r_forearm" x limit 0.00 0.00 0.00
	$jointconstrain "valvebiped.bip01_r_forearm" y limit 0.00 0.00 0.00
	$jointconstrain "valvebiped.bip01_r_forearm" z limit -149.00 4.00 0.00

	$jointconstrain "valvebiped.bip01_r_hand" x limit -60.00 60.00 0.00
	$jointconstrain "valvebiped.bip01_r_hand" y limit 0.00 0.00 0.00
	$jointconstrain "valvebiped.bip01_r_hand" z limit -57.00 70.00 0.00

	$jointconstrain "valvebiped.bip01_r_thigh" x limit -12.00 12.00 0.00
	$jointconstrain "valvebiped.bip01_r_thigh" y limit -8.00 75.00 0.00
	$jointconstrain "valvebiped.bip01_r_thigh" z limit -97.00 32.00 0.00

	$jointconstrain "valvebiped.bip01_r_calf" x limit 0.00 0.00 0.00
	$jointconstrain "valvebiped.bip01_r_calf" y limit 0.00 0.00 0.00
	$jointconstrain "valvebiped.bip01_r_calf" z limit -12.00 126.00 0.00

	$jointconstrain "valvebiped.bip01_head1" x limit -20.00 20.00 0.00
	$jointconstrain "valvebiped.bip01_head1" y limit -25.00 25.00 0.00
	$jointconstrain "valvebiped.bip01_head1" z limit -13.00 30.00 0.00

	$jointconstrain "valvebiped.bip01_l_thigh" x limit -12.00 12.00 0.00
	$jointconstrain "valvebiped.bip01_l_thigh" y limit -73.00 6.00 0.00
	$jointconstrain "valvebiped.bip01_l_thigh" z limit -93.00 30.00 0.00

	$jointconstrain "valvebiped.bip01_l_calf" x limit 0.00 0.00 0.00
	$jointconstrain "valvebiped.bip01_l_calf" y limit 0.00 0.00 0.00
	$jointconstrain "valvebiped.bip01_l_calf" z limit -8.00 126.00 0.00

	$jointconstrain "valvebiped.bip01_l_foot" x limit 0.00 0.00 0.00
	$jointconstrain "valvebiped.bip01_l_foot" y limit -19.00 19.00 0.00
	$jointconstrain "valvebiped.bip01_l_foot" z limit -15.00 35.00 0.00

	$jointconstrain "valvebiped.bip01_r_foot" x limit 0.00 0.00 0.00
	$jointconstrain "valvebiped.bip01_r_foot" y limit -25.00 6.00 0.00
	$jointconstrain "valvebiped.bip01_r_foot" z limit -15.00 35.00 0.00
	$animatedfriction 1.000 400.000 0.500 0.000 0.300
}


Like I said, I’ve done everything I found here to fix the other errors:

Thanks…

A. Use studiomdl/GUIstudiomdl instead.

B.

  • snip -

Opened SourceSDK with all help from your post and it worked :open_mouth:

Thank you soo much!

np ^^ also thank Naelstrom if you used that bit :slight_smile:

Thanks Naelstrom!

( I don’t know what fixed it as I did it all at the same time )

http://www.facepunch.com/image.php?u=232206&dateline=1257467125

:hf:

http://www.facepunch.com/image.php?u=305713&dateline=1277364237