No .phy Generated

I’ve been modelling for a very short time now, and have gotten models to work. I’ve set this up the same as far as I can tell, but for some reason no physics model is being made by studiomdl.exe. I’ve compiled the idle animation, the reference model, and the physics model (in XSI) and the names referenced in here are correct. The QC is:


$modelname [props]/[name].mdl 

$cdmaterials models/[props]

$staticprop

$surfaceprop "weapon"

$scale 1.5 

$body studio "./[name]" 

$sequence idle "[name]_idle" loop fps 15 

$collisionmodel "[name]_phys.smd"
{
	$Mass 5
}

Any ideas?

Try something like this:


$collisionmodel "sentry_hat.smd" {

	$concave
	$mass 1.0
	$inertia 1.00
	$damping 0.00
	$rotdamping 0.00
}

I’ve been having the same problem with a ragdoll model these past few days (just one though the rest were fine), it doesn’t make the .phy and displays no errors.

edit: QC code


$modelname "DC/Superman/superman_cape_ragdoll.mdl"
$scale 1
$body studio "cape_ragdoll_v2.smd"
$cdmaterials "models/DC/Superman"

$surfaceprop "paper"

$sequence idle "cape_bones_v2.smd" fps 30

$collisionjoints "cape_collision_v3.smd" {

	$mass 100.0
	$inertia 1.00
	$damping 0.00
	$rotdamping 0.00
	$rootbone "ValveBiped.Bip01_Head1"

	$jointconstrain "Top_Right" x limit -12.00 12.00 0.00  
	$jointconstrain "Top_Right" y limit -12.00 12.00 0.00  
	$jointconstrain "Top_Right" z limit -12.00 12.00 0.00  

	$jointconstrain "Top_Centre" x limit -12.00 12.00 0.00  
	$jointconstrain "Top_Centre" y limit -12.00 12.00 0.00  
	$jointconstrain "Top_Centre" z limit -12.00 12.00 0.00  

	$jointconstrain "Top_Left" x limit -12.00 12.00 0.00  
	$jointconstrain "Top_Left" y limit -12.00 12.00 0.00  
	$jointconstrain "Top_Left" z limit -12.00 12.00 0.00  

	$jointconstrain "2nd_Right" x limit -12.00 12.00 0.00  
	$jointconstrain "2nd_Right" y limit -12.00 12.00 0.00  
	$jointconstrain "2nd_Right" z limit -12.00 12.00 0.00  

	$jointconstrain "3rd_Right" x limit -12.00 12.00 0.00  
	$jointconstrain "3rd_Right" y limit -12.00 12.00 0.00  
	$jointconstrain "3rd_Right" z limit -12.00 12.00 0.00   

	$jointconstrain "2nd_Centre" x limit -12.00 12.00 0.00  
	$jointconstrain "2nd_Centre" y limit -12.00 12.00 0.00  
	$jointconstrain "2nd_Centre" z limit -12.00 12.00 0.00  

	$jointconstrain "3rd_Centre" x limit -12.00 12.00 0.00  
	$jointconstrain "3rd_Centre" y limit -12.00 12.00 0.00  
	$jointconstrain "3rd_Centre" z limit -12.00 12.00 0.00  

	$jointconstrain "4th_Centre" x limit -12.00 12.00 0.00  
	$jointconstrain "4th_Centre" y limit -12.00 12.00 0.00  
	$jointconstrain "4th_Centre" z limit -12.00 12.00 0.00

	$jointconstrain "2nd_Left" x limit -12.00 12.00 0.00
	$jointconstrain "2nd_Left" y limit -12.00 12.00 0.00
	$jointconstrain "2nd_Left" z limit -12.00 12.00 0.00

	$jointconstrain "3rd_Left" x limit -12.00 12.00 0.00
	$jointconstrain "3rd_Left" y limit -12.00 12.00 0.00
	$jointconstrain "3rd_Left" z limit -12.00 12.00 0.00

}

I’ll show you a prop and a ragdoll .qc:
Prop (a TF2 hat):


$cd "C:\Users\***\Desktop\TF2 Stuff\Hats\Level 1 Sentry Hat\level 1 sentry"
$modelname "player/items/engineer/engineer_train_hat.mdl"
$model "sentry" "Sentry_hat.smd"
$cdmaterials "models\player\items\engineer_sentry"
$texturegroup skinfamilies
{
	{ "sentry1.vmt" }
	{ "sentry1_blue.vmt" }
}
$hboxset "default"
$hbox 0 "bip_head" 8  1  7  -8  -9  -23.5
$surfaceprop "metal"
$illumposition 100 -20 -20
$sequence idle "idle" fps 30.00
$collisionmodel "sentry_hat.smd" {

	$concave
	$mass 1.0
	$inertia 1.00
	$damping 0.00
	$rotdamping 0.00
}

Ragdoll (an edited male_09):


$cd "C:\Users\***\Desktop\omolong\Omolong Source Files\Human"
$modelname "Omolong\Omolong.mdl"
$model "male_09" "male_09_reference.smd" {
     flexfile "mdldecompiler_expressions.vta" {
          flex "AU42" frame 5
          flexpair "AU1" 1.0 frame 6
          flexpair "AU2" 1.0 frame 7
          flexpair "AU4" 1.0 frame 8
          flexpair "AU1AU2" 1.0 frame 9
          flexpair "AU12" 1.0 frame 10
          flex "AU12AU25" frame 11
          flexpair "AU15" 1.0 frame 12
          flexpair "AU17" 1.0 frame 13
          flexpair "AU10" 1.0 frame 14
          flex "AU16" frame 15
          flexpair "AU6" 1.0 frame 16
          flexpair "AU9" 1.0 frame 17
          flexpair "AU25" 1.0 frame 18
          flexpair "AU18" 1.0 frame 19
          flexpair "AU22" 1.0 frame 20
          flexpair "AU20" 1.0 frame 21
          flex "AU32" frame 22
          flex "AU24" frame 23
          flex "AU38" frame 24
          flex "AU31" frame 25
          flexpair "AU26" 1.0 frame 26
          flexpair "AU27" 1.0 frame 27
          flexpair "AU26Z" 1.0 frame 28
          flexpair "AU27Z" 1.0 frame 29
     }
     eyeball righteye ValveBiped.Bip01_Head1 -1.298 -3.605 67.682 eyeball_r 1.000  4.000 grn_pupil_r 0.660
     eyeball lefteye ValveBiped.Bip01_Head1 1.287 -3.605 67.663 eyeball_l 1.000  -4.000 grn_pupil_l 0.660
     //eyelid  upper_right "mdldecompiler_expressions.vta" lowerer 1 -0.218500 neutral 0 -0.000000 raiser 1070659010 0.000000 split 0.1 eyeball righteye
     //eyelid  lower_right "mdldecompiler_expressions.vta" lowerer 2 -0.301000 neutral 0 -0.000000 raiser -1079729613 0.000000  split 0.1 eyeball righteye
     //eyelid  upper_left "mdldecompiler_expressions.vta" lowerer 3 -0.218500 neutral 0 -0.000000 raiser 1070659010 0.000000 split -0.1 eyeball lefteye
     //eyelid  lower_left "mdldecompiler_expressions.vta" lowerer 4 -0.301000 neutral 0 -0.000000 raiser -1079729613 0.000000  split -0.1 eyeball lefteye
     mouth 0 "mouth"  ValveBiped.Bip01_Head1 0.000 1.000 0.000
     flexcontroller eyelid right_lid_raiser "range" 0.000 1.000
     flexcontroller eyelid left_lid_raiser "range" 0.000 1.000
     flexcontroller eyelid right_lid_tightener "range" 0.000 1.000
     flexcontroller eyelid left_lid_tightener "range" 0.000 1.000
     flexcontroller eyelid right_lid_droop "range" 0.000 1.000
     flexcontroller eyelid left_lid_droop "range" 0.000 1.000
     flexcontroller eyelid right_lid_closer "range" 0.000 1.000
     flexcontroller eyelid left_lid_closer "range" 0.000 1.000
     flexcontroller eyelid half_closed "range" 0.000 1.000
     flexcontroller eyelid blink "range" 0.000 1.000
     flexcontroller brow right_inner_raiser "range" 0.000 1.000
     flexcontroller brow left_inner_raiser "range" 0.000 1.000
     flexcontroller brow right_outer_raiser "range" 0.000 1.000
     flexcontroller brow left_outer_raiser "range" 0.000 1.000
     flexcontroller brow right_lowerer "range" 0.000 1.000
     flexcontroller brow left_lowerer "range" 0.000 1.000
     flexcontroller nose right_cheek_raiser "range" 0.000 1.000
     flexcontroller nose left_cheek_raiser "range" 0.000 1.000
     flexcontroller nose wrinkler "range" 0.000 1.000
     flexcontroller nose dilator "range" 0.000 1.000
     flexcontroller mouth right_upper_raiser "range" 0.000 1.000
     flexcontroller mouth left_upper_raiser "range" 0.000 1.000
     flexcontroller mouth right_corner_puller "range" 0.000 1.000
     flexcontroller mouth left_corner_puller "range" 0.000 1.000
     flexcontroller mouth right_corner_depressor "range" 0.000 1.000
     flexcontroller mouth left_corner_depressor "range" 0.000 1.000
     flexcontroller mouth chin_raiser "range" 0.000 1.000
     flexcontroller phoneme right_part "range" 0.000 1.000
     flexcontroller phoneme left_part "range" 0.000 1.000
     flexcontroller phoneme right_puckerer "range" 0.000 1.000
     flexcontroller phoneme left_puckerer "range" 0.000 1.000
     flexcontroller phoneme right_funneler "range" 0.000 1.000
     flexcontroller phoneme left_funneler "range" 0.000 1.000
     flexcontroller phoneme right_stretcher "range" 0.000 1.000
     flexcontroller phoneme left_stretcher "range" 0.000 1.000
     flexcontroller phoneme bite "range" 0.000 1.000
     flexcontroller phoneme presser "range" 0.000 1.000
     flexcontroller phoneme tightener "range" 0.000 1.000
     flexcontroller phoneme jaw_clencher "range" 0.000 1.000
     flexcontroller phoneme jaw_drop "range" 0.000 1.000
     flexcontroller phoneme right_mouth_drop "range" 0.000 1.000
     flexcontroller phoneme left_mouth_drop "range" 0.000 1.000
     flexcontroller mouth smile "range" 0.000 1.000
     flexcontroller mouth lower_lip "range" 0.000 1.000
     flexcontroller head head_rightleft "range" -30.000 30.000
     flexcontroller head head_updown "range" -15.000 15.000
     flexcontroller head head_tilt "range" -15.000 15.000
     flexcontroller eyes eyes_updown "range" -30.000 30.000
     flexcontroller eyes eyes_rightleft "range" -30.000 30.000
     flexcontroller body body_rightleft "range" -30.000 30.000
     flexcontroller chest chest_rightleft "range" -30.000 30.000
     flexcontroller head head_forwardback "range" -0.200 0.200
     flexcontroller gesture gesture_updown "range" -1.000 1.000
     flexcontroller gesture gesture_rightleft "range" -1.000 1.000
    localvar upper_right_raiser
    %upper_right_raiser = ( right_lid_raiser * (( 1.000 - ( right_lid_droop *  0.800)) * (( 1.000 -  right_lid_closer) * ( 1.000 -  blink))))
    localvar upper_right_neutral
    %upper_right_neutral = (( 1.000 - ( right_lid_droop *  0.800)) * (( 1.000 -  right_lid_raiser) * (( 1.000 -  right_lid_closer) * ( 1.000 -  blink))))
    localvar upper_right_lowerer
    %upper_right_lowerer = ( right_lid_closer + ( blink * ( 1.000 -  right_lid_closer)))
    localvar upper_left_raiser
    %upper_left_raiser = ( left_lid_raiser * (( 1.000 - ( left_lid_droop *  0.800)) * (( 1.000 -  left_lid_closer) * ( 1.000 -  blink))))
    localvar upper_left_neutral
    %upper_left_neutral = (( 1.000 - ( left_lid_droop *  0.800)) * (( 1.000 -  left_lid_raiser) * (( 1.000 -  left_lid_closer) * ( 1.000 -  blink))))
    localvar upper_left_lowerer
    %upper_left_lowerer = ( left_lid_closer + ( blink * ( 1.000 -  left_lid_closer)))
    localvar lower_right_raiser
    %lower_right_raiser = ( right_lid_closer + ( blink * ( 0.500 * ( 1.000 -  right_lid_closer))))
    localvar lower_right_neutral
    %lower_right_neutral = (( 1.000 -  right_lid_closer) * (( 1.000 - ( 0.500 *  blink)) * (( 1.000 - ( right_lid_tightener *  0.500)) * ( 1.000 - ( right_cheek_raiser *  0.250)))))
    localvar lower_right_lowerer
    %lower_right_lowerer =  0.000
    localvar lower_left_raiser
    %lower_left_raiser = ( left_lid_closer + ( blink * ( 0.500 * ( 1.000 -  left_lid_closer))))
    localvar lower_left_neutral
    %lower_left_neutral = (( 1.000 -  left_lid_closer) * (( 1.000 - ( 0.500 *  blink)) * (( 1.000 - ( left_lid_tightener *  0.500)) * ( 1.000 - ( left_cheek_raiser *  0.250)))))
    localvar lower_left_lowerer
    %lower_left_lowerer =  0.000
    %AU1R = ( right_inner_raiser * (( 1.000 -  right_outer_raiser) * ( 1.000 -  right_lowerer)))
    %AU1L = ( left_inner_raiser * (( 1.000 -  left_outer_raiser) * ( 1.000 -  left_lowerer)))
    %AU2R = ( right_outer_raiser * (( 1.000 -  right_inner_raiser) * ( 1.000 -  right_lowerer)))
    %AU2L = ( left_outer_raiser * (( 1.000 -  left_inner_raiser) * ( 1.000 -  left_lowerer)))
    %AU1AU2R = ( right_inner_raiser * ( right_outer_raiser * ( 1.000 -  right_lowerer)))
    %AU1AU2L = ( left_inner_raiser * ( left_outer_raiser * ( 1.000 -  left_lowerer)))
    %AU4R =  right_lowerer
    %AU4L =  left_lowerer
    %AU6R =  right_cheek_raiser
    %AU6L =  left_cheek_raiser
    %AU9R =  wrinkler
    %AU9L =  wrinkler
    %AU38 =  dilator
    localvar right_open
    %right_open = ( smile + (( right_part * ( 1.000 -  smile)) + ( right_puckerer + ( right_funneler + (( right_upper_raiser *  0.500) + ( lower_lip *  0.500))))))
    localvar left_open
    %left_open = ( smile + (( left_part * ( 1.000 -  smile)) + ( left_puckerer + ( left_funneler + (( left_upper_raiser *  0.500) + ( lower_lip *  0.500))))))
    localvar right_lip_suppressor
    %right_lip_suppressor = (( 1.000 /  %right_open) * (( 1.000 -  presser) * ( 1.000 -  bite)))
    localvar left_lip_suppressor
    %left_lip_suppressor = (( 1.000 /  %left_open) * (( 1.000 -  presser) * ( 1.000 -  bite)))
    %AU10R = ( right_upper_raiser * ( right_upper_raiser * ( 0.500 *  %right_lip_suppressor)))
    %AU10L = ( left_upper_raiser * ( left_upper_raiser * ( 0.500 *  %left_lip_suppressor)))
    %AU25R = ( right_part * (( right_part *  %right_lip_suppressor) * ( 1.000 -  smile)))
    %AU25L = ( left_part * (( left_part *  %left_lip_suppressor) * ( 1.000 -  smile)))
    %AU12AU25 = ( smile * ( smile * ( 0.500 * ( %right_lip_suppressor +  %left_lip_suppressor))))
    %AU18R = ( right_puckerer * ( right_puckerer *  %right_lip_suppressor))
    %AU18L = ( left_puckerer * ( left_puckerer *  %left_lip_suppressor))
    %AU22R = ( right_funneler * ( right_funneler *  %right_lip_suppressor))
    %AU22L = ( left_funneler * ( left_funneler *  %left_lip_suppressor))
    %AU17R = ( chin_raiser * (( 1.000 - ( jaw_drop *  0.500)) * (( 1.000 -  bite) * (( 1.000 - ( 0.600 * ( %AU25R + ( %AU18R +  %AU22R)))) * ( 1.000 -  smile)))))
    %AU17L = ( chin_raiser * (( 1.000 - ( jaw_drop *  0.500)) * (( 1.000 -  bite) * (( 1.000 - ( 0.600 * ( %AU25L + ( %AU18L +  %AU22L)))) * ( 1.000 -  smile)))))
    localvar right_depressor_suppressor
    %right_depressor_suppressor = (( 1.000 / (( %AU18R *  0.800) + (( %AU22R *  0.800) + ( %AU17R + ( bite + ( right_corner_puller + ( right_stretcher +  right_corner_depressor))))))) * (( 1.000 - ( jaw_drop *  0.500)) * ( 1.000 - ( smile *  0.500))))
    localvar left_depressor_suppressor
    %left_depressor_suppressor = (( 1.000 / (( %AU18L *  0.800) + (( %AU22L *  0.800) + ( %AU17L + ( bite + ( left_corner_puller + ( left_stretcher +  left_corner_depressor))))))) * (( 1.000 - ( jaw_drop *  0.500)) * ( 1.000 - ( smile *  0.500))))
    %AU15R = ( right_corner_depressor * ( right_corner_depressor *  %right_depressor_suppressor))
    %AU15L = ( left_corner_depressor * ( left_corner_depressor *  %left_depressor_suppressor))
    localvar right_corner_suppressor
    %right_corner_suppressor = (( 1.000 / (( %AU18R *  0.800) + (( %AU22R *  0.800) + ( %AU17R + ( bite + ( right_corner_puller + ( right_stretcher +  right_corner_depressor))))))) * (( 1.000 - ( jaw_drop *  0.500)) * ( 1.000 -  smile)))
    localvar left_corner_suppressor
    %left_corner_suppressor = (( 1.000 / (( %AU18L *  0.800) + (( %AU22L *  0.800) + ( %AU17L + ( bite + ( left_corner_puller + ( left_stretcher +  left_corner_depressor))))))) * (( 1.000 - ( jaw_drop *  0.500)) * ( 1.000 -  smile)))
    %AU12R = ( right_corner_puller * ( right_corner_puller *  %right_corner_suppressor))
    %AU12L = ( left_corner_puller * ( left_corner_puller *  %left_corner_suppressor))
    %AU20R = ( right_stretcher * ( right_stretcher *  %right_corner_suppressor))
    %AU20L = ( left_stretcher * ( left_stretcher *  %left_corner_suppressor))
    %AU32 =  bite
    %AU24 = ( presser + (( 1.000 -  presser) *  tightener))
    %AU31 = ( jaw_clencher * ( jaw_clencher / ( jaw_clencher +  jaw_drop)))
    localvar right_drop_suppressor
    %right_drop_suppressor = (( 1.000 / (( 0.500 *  %right_open) +  right_mouth_drop)) * (( 1.000 -  presser) * ( 1.000 -  bite)))
    localvar left_drop_suppressor
    %left_drop_suppressor = (( 1.000 / (( 0.500 *  %left_open) +  left_mouth_drop)) * (( 1.000 -  presser) * ( 1.000 -  bite)))
    localvar right_drop
    %right_drop = ( right_mouth_drop * ( right_mouth_drop *  %right_drop_suppressor))
    localvar left_drop
    %left_drop = ( left_mouth_drop * ( left_mouth_drop *  %left_drop_suppressor))
    %AU26R = ( jaw_drop * (( 1.000 -  %right_drop) * ( jaw_drop / ( jaw_clencher +  jaw_drop))))
    %AU26L = ( jaw_drop * (( 1.000 -  %left_drop) * ( jaw_drop / ( jaw_clencher +  jaw_drop))))
    %AU27R = ( jaw_drop * ( %right_drop * ( jaw_drop / ( jaw_clencher +  jaw_drop))))
    %AU27L = ( jaw_drop * ( %left_drop * ( jaw_drop / ( jaw_clencher +  jaw_drop))))
    %AU16 = ( lower_lip * (( lower_lip * ( 0.250 * ( %right_lip_suppressor +  %left_lip_suppressor))) * ( 1.000 - ( 0.500 * ( %AU27R +  %AU27L)))))
    localvar mouth
    %mouth = (( %AU27R *  0.500) + (( %AU27L *  0.500) + (( %AU22R *  0.350) + (( %AU22L *  0.350) + (( %AU18R *  0.250) + (( %AU18L *  0.250) + (( %AU25R *  0.350) + (( %AU25L *  0.350) + (( %AU32 *  0.500) + ( %AU12AU25 + ((( %AU27ZR +  %AU27ZL) * ( 0.500 *  0.700)) + ( %AU16 *  0.400))))))))))))
}
$bodygroup head
{
	studio "UnknownModelName.smd"
	studio "male_09_reference_hood_down_bodygroup2.smd"
	studio "male_09_reference_hood_bodygroup2.smd"
	studio "male_09_reference_hat_bodygroup.smd"
	studio "male_09_reference_gasmask_bodygroup.smd"
	studio "male_09_reference_alien_mask_bodygroup2.smd"
	studio "male_09_reference_metrocop_back_mask_bodygroup.smd"
	studio "male_09_reference_metrocop_mask_bodygroup.smd"
}
$cdmaterials "models\Omolong\"
$cdmaterials "models\police\"
$hboxset "default"
$hbox 1 "ValveBiped.Bip01_Head1" -1.250  -6.500  -3.190  8.250  3.500  3.310
$hbox 4 "ValveBiped.Bip01_L_UpperArm" 0.000  -2.750  -2.750  12.510  1.750  2.250
$hbox 4 "ValveBiped.Bip01_L_Forearm" 0.000  -2.190  -2.380  13.000  1.810  1.620
$hbox 4 "ValveBiped.Bip01_L_Hand" 0.060  -2.000  -1.500  4.060  1.000  2.500
$hbox 5 "ValveBiped.Bip01_R_UpperArm" 0.000  -3.000  -2.250  12.390  2.000  2.750
$hbox 5 "ValveBiped.Bip01_R_Forearm" -0.500  -2.200  -1.550  12.500  1.800  2.450
$hbox 5 "ValveBiped.Bip01_R_Hand" 0.060  -2.000  -2.500  4.060  1.000  1.500
$hbox 6 "ValveBiped.Bip01_L_Thigh" 0.000  -3.750  -3.250  17.850  3.750  3.250
$hbox 6 "ValveBiped.Bip01_L_Calf" 0.000  -3.510  -3.280  15.640  3.490  2.720
$hbox 6 "ValveBiped.Bip01_L_Foot" -1.070  -2.000  -2.840  5.040  5.000  2.160
$hbox 6 "ValveBiped.Bip01_L_Toe0" -0.500  -3.000  -2.190  2.500  0.000  2.460
$hbox 7 "ValveBiped.Bip01_R_Thigh" 0.000  -3.750  -3.250  17.850  3.750  3.250
$hbox 7 "ValveBiped.Bip01_R_Calf" 0.000  -3.510  -2.820  15.640  3.490  3.180
$hbox 7 "ValveBiped.Bip01_R_Foot" -1.060  -2.010  -2.280  5.050  4.990  2.720
$hbox 7 "ValveBiped.Bip01_R_Toe0" -0.500  -3.000  -2.600  2.500  0.000  2.100
$hbox 3 "ValveBiped.Bip01_Pelvis" -7.500  -5.500  -6.000  7.500  8.500  5.000
$hbox 2 "ValveBiped.Bip01_Spine2" -2.500  -2.500  -7.000  14.500  7.500  7.000
// Model uses material "mouth.vmt"
// Model uses material "eyeball_r.vmt"
// Model uses material "citizen_sheet.vmt"
// Model uses material "eyeball_l.vmt"
// Model uses material "erdim_cylmap.vmt"
// Model uses material "grn_pupil_r.vmt"
// Model uses material "glint.vmt"
// Model uses material "grn_pupil_l.vmt"
$attachment "eyes" "ValveBiped.Bip01_Head1" 3.79 -3.78 0.01 rotate 0.00 -80.10 -90.00
$attachment "mouth" "ValveBiped.Bip01_Head1" 1.00 -5.70 -0.00 rotate 0.00 -80.00 -90.00
$attachment "chest" "ValveBiped.Bip01_Spine2" 5.00 4.00 -0.00 rotate 0.00 90.00 90.00
$attachment "forward" "ValveBiped.forward" 0.00 -0.00 0.00 rotate 0.00 0.00 -0.00
$attachment "anim_attachment_RH" "ValveBiped.Anim_Attachment_RH" -0.00 -0.00 -0.00 rotate -90.00 -90.00 0.00
$attachment "anim_attachment_LH" "ValveBiped.Anim_Attachment_LH" -0.00 0.00 -0.00 rotate -90.00 -90.00 0.00
$attachment "anim_attachment_head" "ValveBiped.Bip01_Head1" -0.00 0.00 -0.00 rotate -90.00 -90.00 0.00
$includemodel "humans/male_shared.mdl"
$includemodel "humans/male_ss.mdl"
$includemodel "humans/male_gestures.mdl"
$includemodel "humans/male_postures.mdl"
$surfaceprop "flesh"
$eyeposition -0.000 0.000 70.000
$illumposition 0.637 0.000 36.119
$sequence ragdoll "ragdoll" ACT_DIERAGDOLL 1 fps 30.00
$ikchain rhand ValveBiped.Bip01_R_Hand knee  0.707 0.707 0.000
$ikchain lhand ValveBiped.Bip01_L_Hand knee  0.707 0.707 0.000
$ikchain rfoot ValveBiped.Bip01_R_Foot knee  0.707 -0.707 0.000
$ikchain lfoot ValveBiped.Bip01_L_Foot knee  0.707 -0.707 0.000
$collisionjoints "phymodel.smd" {

	$mass 90.0
	$inertia 10.00
	$damping 0.01
	$rotdamping 1.50
	$rootbone "valvebiped.bip01_pelvis"
	$jointmerge "ValveBiped.Bip01_Pelvis" "ValveBiped.Bip01_Spine1"

	$jointconstrain "valvebiped.bip01_spine2" x limit -48.00 48.00 0.00
	$jointconstrain "valvebiped.bip01_spine2" y limit -25.00 25.00 0.00
	$jointconstrain "valvebiped.bip01_spine2" z limit -25.00 50.00 0.00

	$jointconstrain "valvebiped.bip01_r_upperarm" x limit -39.00 39.00 0.00
	$jointconstrain "valvebiped.bip01_r_upperarm" y limit -79.00 95.00 0.00
	$jointconstrain "valvebiped.bip01_r_upperarm" z limit -93.00 23.00 0.00

	$jointconstrain "valvebiped.bip01_l_upperarm" x limit -30.00 30.00 0.00
	$jointconstrain "valvebiped.bip01_l_upperarm" y limit -95.00 84.00 0.00
	$jointconstrain "valvebiped.bip01_l_upperarm" z limit -86.00 26.00 0.00

	$jointconstrain "valvebiped.bip01_l_forearm" x limit 0.00 0.00 0.00
	$jointconstrain "valvebiped.bip01_l_forearm" y limit 0.00 0.00 0.00
	$jointconstrain "valvebiped.bip01_l_forearm" z limit -149.00 4.00 0.00

	$jointconstrain "valvebiped.bip01_l_hand" x limit -37.00 37.00 0.00
	$jointconstrain "valvebiped.bip01_l_hand" y limit 0.00 0.00 0.00
	$jointconstrain "valvebiped.bip01_l_hand" z limit -57.00 59.00 0.00

	$jointconstrain "valvebiped.bip01_r_forearm" x limit 0.00 0.00 0.00
	$jointconstrain "valvebiped.bip01_r_forearm" y limit 0.00 0.00 0.00
	$jointconstrain "valvebiped.bip01_r_forearm" z limit -149.00 4.00 0.00

	$jointconstrain "valvebiped.bip01_r_hand" x limit -60.00 60.00 0.00
	$jointconstrain "valvebiped.bip01_r_hand" y limit 0.00 0.00 0.00
	$jointconstrain "valvebiped.bip01_r_hand" z limit -57.00 70.00 0.00

	$jointconstrain "valvebiped.bip01_r_thigh" x limit -12.00 12.00 0.00
	$jointconstrain "valvebiped.bip01_r_thigh" y limit -8.00 75.00 0.00
	$jointconstrain "valvebiped.bip01_r_thigh" z limit -97.00 32.00 0.00

	$jointconstrain "valvebiped.bip01_r_calf" x limit 0.00 0.00 0.00
	$jointconstrain "valvebiped.bip01_r_calf" y limit 0.00 0.00 0.00
	$jointconstrain "valvebiped.bip01_r_calf" z limit -12.00 126.00 0.00

	$jointconstrain "valvebiped.bip01_head1" x limit -20.00 20.00 0.00
	$jointconstrain "valvebiped.bip01_head1" y limit -25.00 25.00 0.00
	$jointconstrain "valvebiped.bip01_head1" z limit -13.00 30.00 0.00

	$jointconstrain "valvebiped.bip01_l_thigh" x limit -12.00 12.00 0.00
	$jointconstrain "valvebiped.bip01_l_thigh" y limit -73.00 6.00 0.00
	$jointconstrain "valvebiped.bip01_l_thigh" z limit -93.00 30.00 0.00

	$jointconstrain "valvebiped.bip01_l_calf" x limit 0.00 0.00 0.00
	$jointconstrain "valvebiped.bip01_l_calf" y limit 0.00 0.00 0.00
	$jointconstrain "valvebiped.bip01_l_calf" z limit -8.00 126.00 0.00

	$jointconstrain "valvebiped.bip01_l_foot" x limit 0.00 0.00 0.00
	$jointconstrain "valvebiped.bip01_l_foot" y limit -19.00 19.00 0.00
	$jointconstrain "valvebiped.bip01_l_foot" z limit -15.00 35.00 0.00

	$jointconstrain "valvebiped.bip01_r_foot" x limit 0.00 0.00 0.00
	$jointconstrain "valvebiped.bip01_r_foot" y limit -25.00 6.00 0.00
	$jointconstrain "valvebiped.bip01_r_foot" z limit -15.00 35.00 0.00
	$animatedfriction 1.000 400.000 0.500 0.300 0.000
}

The QC isn’t the problem thats an altered standard one (with the bones that I rigged that model with and the paths for it defined), it’s when I compile it, it doesn’t produce a .phy file. I’ve compiled many things before with no issue like this, it’s this one damn model that wont make one @.@

Edit: fixed the error, the material on the collision model had become corrupted because none had been set, I set a texture to it and it compiled the .phy fine ^^

Thanks for the replies guys, I tried both of yours, but I think Omolong’s just makes it a physics prop instead of static and the collision model has a valid texture already.