Player model .qc Help!

So, I’m pretty new to doing playermodels infact, I figured it out yesterday. All the animations on the player model work perfect until it does and it goes in this weird T-pose anybody know why this is?

Here is the .qc

This is what it looks like when it’s dead.

http://s14.postimage.org/gdfftab6p/2012_02_18_00002.jpg

I could be wrong… But it looks like it’s missing its physics model. do you have one made?

You’re missing this at the bottom.
[lua]
$collisionjoints “phymodel.smd” {

$mass 90.0
$inertia 10.00
$damping 0.01
$rotdamping 1.50
$rootbone "valvebiped.bip01_pelvis"
$jointmerge "ValveBiped.Bip01_Pelvis" "ValveBiped.Bip01_Spine1"

$jointconstrain "valvebiped.bip01_l_thigh" x limit -12.00 12.00 0.00
$jointconstrain "valvebiped.bip01_l_thigh" y limit -73.00 6.00 0.00
$jointconstrain "valvebiped.bip01_l_thigh" z limit -93.00 30.00 0.00

$jointconstrain "valvebiped.bip01_l_calf" x limit 0.00 0.00 0.00
$jointconstrain "valvebiped.bip01_l_calf" y limit 0.00 0.00 0.00
$jointconstrain "valvebiped.bip01_l_calf" z limit -8.00 126.00 0.00

$jointconstrain "valvebiped.bip01_r_thigh" x limit -12.00 12.00 0.00
$jointconstrain "valvebiped.bip01_r_thigh" y limit -8.00 75.00 0.00
$jointconstrain "valvebiped.bip01_r_thigh" z limit -97.00 32.00 0.00

$jointconstrain "valvebiped.bip01_r_calf" x limit 0.00 0.00 0.00
$jointconstrain "valvebiped.bip01_r_calf" y limit 0.00 0.00 0.00
$jointconstrain "valvebiped.bip01_r_calf" z limit -12.00 126.00 0.00

$jointconstrain "valvebiped.bip01_r_foot" x limit 0.00 0.00 0.00
$jointconstrain "valvebiped.bip01_r_foot" y limit -25.00 6.00 0.00
$jointconstrain "valvebiped.bip01_r_foot" z limit -15.00 35.00 0.00

$jointconstrain "valvebiped.bip01_spine2" x limit -48.00 48.00 0.00
$jointconstrain "valvebiped.bip01_spine2" y limit -25.00 25.00 0.00
$jointconstrain "valvebiped.bip01_spine2" z limit -25.00 50.00 0.00

$jointconstrain "valvebiped.bip01_l_upperarm" x limit -30.00 30.00 0.00
$jointconstrain "valvebiped.bip01_l_upperarm" y limit -95.00 84.00 0.00
$jointconstrain "valvebiped.bip01_l_upperarm" z limit -86.00 26.00 0.00

$jointconstrain "valvebiped.bip01_l_forearm" x limit 0.00 0.00 0.00
$jointconstrain "valvebiped.bip01_l_forearm" y limit 0.00 0.00 0.00
$jointconstrain "valvebiped.bip01_l_forearm" z limit -149.00 4.00 0.00

$jointconstrain "valvebiped.bip01_r_upperarm" x limit -39.00 39.00 0.00
$jointconstrain "valvebiped.bip01_r_upperarm" y limit -79.00 95.00 0.00
$jointconstrain "valvebiped.bip01_r_upperarm" z limit -93.00 23.00 0.00

$jointconstrain "valvebiped.bip01_r_forearm" x limit 0.00 0.00 0.00
$jointconstrain "valvebiped.bip01_r_forearm" y limit 0.00 0.00 0.00
$jointconstrain "valvebiped.bip01_r_forearm" z limit -149.00 4.00 0.00

$jointconstrain "valvebiped.bip01_r_hand" x limit -60.00 60.00 0.00
$jointconstrain "valvebiped.bip01_r_hand" y limit 0.00 0.00 0.00
$jointconstrain "valvebiped.bip01_r_hand" z limit -57.00 70.00 0.00

$jointconstrain "valvebiped.bip01_head1" x limit -20.00 20.00 0.00
$jointconstrain "valvebiped.bip01_head1" y limit -25.00 25.00 0.00
$jointconstrain "valvebiped.bip01_head1" z limit -13.00 30.00 0.00

$jointconstrain "valvebiped.bip01_l_hand" x limit -37.00 37.00 0.00
$jointconstrain "valvebiped.bip01_l_hand" y limit 0.00 0.00 0.00
$jointconstrain "valvebiped.bip01_l_hand" z limit -57.00 59.00 0.00

$jointconstrain "valvebiped.bip01_l_foot" x limit 0.00 0.00 0.00
$jointconstrain "valvebiped.bip01_l_foot" y limit -19.00 19.00 0.00
$jointconstrain "valvebiped.bip01_l_foot" z limit -15.00 35.00 0.00
$animatedfriction 1.000 400.000 0.500 0.000 0.300

}
[/lua]

After I do that I get and try to compile the model I get this. I use GUIStudioMDL 2.2


ERROR: c:\users\owner\documents\mdldecompiler.qc(163): - could not load file 'C:\Users\Owner\Documents/phymodel.smd'
ERROR: Aborted Processing on 'tlsaudrl2548\delta2.mdl'


bump

Nobody can help me :C

Make sure you’ve actually got a physics model. If it’s using the basic Valve biped, you could just use the physmodel decompiled from someone like the citizen.